MK10DX64VMC7 - Kinetis K10 Cortex-M4 MCU 72MHz | NXP
N.º da peça: MK10DX64VMC7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.76 | $3,76 |
| 10 | $3.49 | $34,90 |
| 100 | $3.2 | $320,00 |
| 500 | $2.95 | $1.475,00 |
| 1.000 | $2.72 | $2.720,00 |
MK10DX64VMC7 Visão geral
A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, serving as the embedded computing backbone of modern electronic systems. Within the product hierarchy, the MK10DX64VMC7 sits at: ARM Cortex-M4 32-bit core -> Kinetis K10 family -> Kinetis K series -> NXP mid-performance MCU portfolio. Microcontrollers replace discrete processor-plus-peripheral chip sets, reducing board area, BOM cost, and system power consumption while improving reliability.
Key features include the 72 MHz Cortex-M4 core with DSP instructions and single-cycle MAC for efficient control-loop execution, 64 KB on-chip flash program memory, NXP's flexible low-power mode architecture, and high-precision analog integration that the Kinetis K10 family is known for. The scalable Kinetis platform allows designers to migrate between flash sizes and pin-compatible package options as product requirements evolve.
Architecturally, the device uses the ARMv7E-M Cortex-M4 processor with a nested vectored interrupt controller (NVIC), which delivers deterministic interrupt latency for real-time control applications. The K10 sub-family clock system includes an FLL (frequency-locked loop) with multiple reference options; per the K10 datasheet, mode transitions involving the FLL reference divider, trim value, DMX32 bit, or DRS bits require observing specified timing constraints during changes between FLL-enabled (FEI, FEE, FBE, FBI) and FLL-disabled (BLPE, BLPI) modes.
Typical applications include industrial control and factory automation nodes, consumer appliance control boards, and embedded instrumentation requiring a balance of DSP-capable 32-bit performance and cost efficiency. The 121-ball 8x8 mm MAPBGA suits space-constrained, high-pin-count designs needing multiple communication ports.
Design consideration: BGA packages require controlled-impedance PCB fabrication and X-ray or acoustic inspection capability for assembly quality assurance; verify your contract manufacturer supports 0.8 mm-pitch BGA assembly before selecting this package option.
This page synthesizes distributor pricing, same-footprint drop-in alternatives from the Kinetis and broader NXP families, and practical design notes not found in the manufacturer datasheet, helping engineers make faster sourcing and design decisions.
Alternativas drop-in para MK10DX64VMC7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MK10DX64VMC7 (mesmo formato e footprint) — diferindo em Peripherals, Connectivity, Flash Memory, Number of I/O, Core Processor.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MK20DX64VMC7
✅ Drop-In✓ Em estoque
$1.78 / unidade
Ver ficha técnica →MK12DX128VMC5
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →MK21DN512VMC5
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →MKL26Z128VMC4
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.95 / unidade
Ver ficha técnica →MK21DN512AVLK5
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.8 / unidade
Ver ficha técnica →MK10DX64VMC7 Classificações máximas e características elétricas
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-Bit |
| Frequência máxima de clock | 72 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Product Family | Kinetis K10 (K1x Baseline Series) |
| Encapsulamento | 121-MAPBGA (8x8 mm) |
| Number of Terminals | 121 |
| Terminal Form | Ball (BGA) |
| Tipo de montagem | Surface Mount |
| Operating Temperature Grade | Industrial |
| Peripherals | Analog, communication, timing and control peripherals |
| Low-Power Modes | Flexible low-power options |
| Analog Integration | High-precision analog integration |
Guia de Configuração de Pinos do MK10DX64VMC7 121-mapbga (8x8 mm)
Configuração de pinos para MK10DX64VMC7 (pacote 121-mapbga (8x8 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MK10DX64VMC7.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MK10DX64VMC7 é adequado para 6 aplicaçãos: Industrial Control and Automation, Consumer Appliance Control, Embedded Instrumentation and Sensing, Motor Control Drives, IoT Sensor Nodes, Building Automation and HVAC.
Industrial Control and Automation
The MK10DX64VMC7 fits industrial control nodes where a 72 MHz Cortex-M4 with DSP instructions executes fast control loops such as PID regulation, digital power conversion, and motor commutation. According to NXP, the Kinetis K10 family targets industrial applications with high-precision analog integration, allowing ADC-based sensing and PWM-based actuation on a single die. The 121-MAPBGA 8x8 mm package provides enough balls for multiple UART, SPI, I2C, and timer channels in compact PLC-style I/O modules. Typical usage places the MCU as the main controller between field sensors and actuators; the 64 KB flash accommodates a modest RTOS or bare-metal control firmware, and the flexible low-power modes suit intermittently powered monitoring nodes.
Recomendado
Consumer Appliance Control
Consumer appliances such as dishwashers, air conditioners, and small kitchen devices need a cost-efficient MCU with adequate peripherals, and the MK10DX64VMC7 at roughly $3.76 (LCSC, as of 2026-10-18) meets that budget while providing 32-bit headroom for touchscreen interfaces, sensor fusion, or brushed-motor control. The K10 family's high-precision analog integration handles NTC temperature sensing and user-interface key scanning without extra external ICs. The 121-MAPBGA 8x8 mm footprint minimizes PCB area in flat control boards. In this role, the MCU drives relays/triacs via GPIO and timers, samples user input, and manages buzzer/display feedback; the 64 KB flash suffices for application plus a lightweight UI framework.
Recomendado
Embedded Instrumentation and Sensing
Portable and bench instrumentation benefits from the MK10DX64VMC7's combination of DSP-capable math (single-cycle MAC for FFT and digital filtering) and K10-family precision analog peripherals. A 72 MHz Cortex-M4 can perform on-the-fly signal conditioning, RMS computation, and calibration math that would overload an 8-bit MCU. The 121-ball package brings out multiple analog and communication balls for interfacing external precision ADCs or front ends over SPI. Designs typically place the MCU behind an analog front end, using the FLL-based clock system for stable sample timing; per the K10 datasheet, clock-mode transitions require observing FLL change constraints to avoid timing glitches during measurement sequences.
Recomendado
Motor Control Drives
The Cortex-M4 core in the MK10DX64VMC7 executes field-oriented control (FOC) algorithms efficiently thanks to DSP extensions and single-cycle multiply-accumulate, making it suitable for small BLDC and PMSM drives in fans, pumps, and power tools. The K10 family provides PWM timers and ADC channels for three-phase current sensing within a single 8x8 mm 121-MAPBGA package. A typical implementation samples phase currents each PWM cycle, runs Clarke/Park transforms and a PI current loop at 16-20 kHz, all within the 72 MHz core budget. The 64 KB flash holds the control stack plus protection and communication firmware; designers should verify ADC sampling latency and PWM dead-time resolution against their motor specifications.
Recomendado
IoT Sensor Nodes
The MK10DX64VMC7 serves as the processing hub in IoT sensor nodes where the flexible low-power modes of the Kinetis K10 family extend battery life between radio transmissions. The 72 MHz Cortex-M4 handles local data preprocessing, filtering, and protocol formatting for external connectivity modules over UART or SPI, while the industrial temperature grade suits outdoor and factory deployments. Node firmware typically sleeps in stop mode, wakes on sensor interrupts, processes data, and reports via a connected radio; the K10 clock system's BLPE/BLPI bypass modes provide low-power clocking between active periods, per the K10 datasheet FLL mode descriptions. The 64 KB flash constrains complex TLS stacks, so pair with a module that offloads security.
Recomendado
Building Automation and HVAC
Building automation controllers - thermostats, damper actuators, and zone controllers - benefit from the MK10DX64VMC7's balance of analog integration, multiple serial ports for RS-485/Modbus or BACnet MS/TP layers, and a 72 MHz core for protocol stacks. The K10 family's high-precision analog converts temperature and humidity sensor inputs directly, while timers generate PWM outputs for valve and fan control. The 121-MAPBGA package supports the ball count needed for isolated communication interfaces and multiple GPIO zones. Firmware typically combines a Modbus slave stack with PID control loops; at 64 KB flash this fits a lean implementation, and designers needing richer stacks can drop in the pin-compatible MK12DX128VMC5 with double the flash.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MK10DX64VMC7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MK20DX64VMC7 | MK12DX128VMC5 | MK21DN512VMC5 | MKL26Z128VMC4 |
|---|---|---|---|---|---|
| Package | 121-MAPBGA (8x8) | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M0+ |
| Max Clock Frequency | 72 MHz | 72 MHz | 72 MHz | 120 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 512 KB | 128 KB |
| Product Family | Kinetis K10 | Kinetis K20 | Kinetis K12 | Kinetis K21 | Kinetis KL2 (L series) |
| Lifecycle Status | Active | Active | Active | Active | Active |
Principais diferenciais
- Lowest-cost Cortex-M4 in the VMC footprint family (vs MK21DN512VMC5)
- Full DSP-capable Cortex-M4 core (vs MKL26Z128VMC4)
- Cost-optimized baseline when USB is not needed (vs MK20DX64VMC7)
Notas de projeto
The 121-MAPBGA is a 0.8 mm-pitch BGA requiring controlled PCB fabrication: specify adequate layer count (typically 4+ layers) for ball escape routing and power/ground planes. Verify your contract manufacturer supports BGA assembly with X-ray or acoustic microscope inspection. Per IPC guidance for BGA land patterns, use solder-mask-defined or non-solder-mask-defined pads consistently with your fab's capability. Plan decoupling capacitor placement directly beneath the BGA on the opposite side or inner layers to minimize power loop inductance.
The K10 clock system uses an FLL with multiple modes (FEI, FEE, FBE, FBI) and bypass states (BLPE, BLPI). According to the K10 sub-family datasheet, any change of FLL reference source, reference divider, trim value, DMX32 bit, or DRS bits - and transitions between FLL-enabled and FLL-disabled modes - requires observing specified timing constraints. Design your firmware power-mode state machine to follow these constraints to avoid clock glitches during run-to-low-power transitions.
Confirm flash density before layout reuse: the MK10DX64VMC7 provides 64 KB, but Kinetis VMC-package family members range up to 512 KB (e.g., MK21DN512VMC5). When planning firmware growth or OTA-update capacity, choosing a pin-compatible higher-flash variant early avoids a BOM change later. Also verify SRAM sufficiency for your stack + heap + DMA buffers, since DSP-style processing on the Cortex-M4 consumes RAM quickly.
Informações de conformidade
Compliance status not present in the provided web data. Industrial temperature grade per distributor listings. Consult NXP product page for official RoHS/REACH declarations.
