Renesas Electronics

MK2304S-1ILFT - 133MHz Zero Delay Buffer | Renesas

N.º de pieza: MK2304S-1ILFT ✓ Activo
8-SOIC Package 133 MHz Speed
MOQ: 1 |

MK2304S-1ILFT Descripción general

The Renesas Electronics MK2304S-1ILFT is a 133 MHz zero-delay, low-skew CMOS clock buffer with PLL capability, packaged in an 8-SOIC measuring 3.90 mm in width. It is designed to reproduce clock signals with minimal propagation delay while controlling skew between outputs, making it suitable for synchronizing digital logic, processors, memory interfaces, and other clocked subsystems.

A zero-delay buffer is a clock-management integrated circuit that compensates for the propagation delay introduced by clock routing. It belongs to the clock buffer family within clock and timing ICs, where buffer, driver, and PLL-based devices distribute high-speed reference clocks across a system. The MK2304S-1ILFT combines one clock circuit, a clock input, CMOS outputs, and PLL capability in a surface-mount package.

The device supports operation to 133 MHz and is identified as a low-skew zero-delay buffer. These characteristics are significant in systems where multiple loads must receive closely related clock transitions. The 8-SOIC package provides a compact surface-mount solution for PCB designs that require more than a passive delay element but do not need the functional complexity of a general-purpose clock generator.

In the digital signal path, the buffer accepts a clock signal and provides a corresponding CMOS clock output. Its zero-delay architecture is intended to preserve system timing relationships more effectively than ordinary logic-buffer routing, where cumulative gate and trace delay can shift clock arrival times. PLL capability provides an additional clock-related function, although operating mode, feedback topology, and configuration details must be established from the manufacturer datasheet.

Typical applications include clock distribution for communications equipment, processor and memory clock interfaces, embedded control systems, industrial automation, and consumer electronics. The 133 MHz maximum operating frequency makes the device relevant to legacy and established digital platforms rather than the highest-speed contemporary processor interfaces. The 3.90 mm-wide SOIC package also supports conventional surface-mount assembly and repair workflows.

PCB implementation should preserve a short, symmetric clock path between the source, buffer, and receiving circuits. Place the device close to the clock source or load it is intended to buffer, use a continuous ground reference, and avoid routing the clock through test pads or long parallel segments where avoidable. Decoupling capacitors should be positioned close to the supply and ground pins according to the manufacturer’s reference layout.

This product page combines the manufacturer device description with application guidance, design considerations, and a structured comparison framework. It supports engineers evaluating the MK2304S-1ILFT for low-skew clock distribution, replacement planning, footprint verification, and PCB implementation in 8-SOIC designs.

Alternativas directas para MK2304S-1ILFT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

MK2304S-1ILFT Especificaciones

Device Type Zero Delay Buffer
Description Zero Delay, Low Skew Buffer
Maximum Operating Frequency 133 MHz
Number of Circuits 1 circuit
PLL Yes
Input Type Clock
Tipo de salida CMOS
Encapsulado 8-SOIC
Package Width 3.90 mm
Package Length 0.154 inch
Tipo de montaje Surface Mount

Guía de configuración de pines de MK2304S-1ILFT 0.154 inch

Configuración de pines para MK2304S-1ILFT (encapsulado 0.154 inch). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 0.154 inch para MK2304S-1ILFT

No hay datos detallados de patillaje disponibles para MK2304S-1ILFT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MK2304S-1ILFT es adecuado para 6 aplicacións: Embedded Control Clock Distribution, Processor and Memory Interface Clocks, Communications Equipment Clocking, Industrial Automation Control, Consumer and Embedded Electronics, Test and Measurement Instrumentation.

🔧

Embedded Control Clock Distribution

The Renesas Electronics MK2304S-1ILFT fits embedded-control designs that require a buffered clock to reach multiple digital logic sections. Its 133 MHz maximum operating frequency covers established controller and peripheral clock domains, while the zero-delay, low-skew architecture helps preserve relative clock arrival times across PCB traces. The CMOS output suits modern digital logic, and the one-circuit configuration makes the device appropriate when a single source clock needs buffering rather than multiplication. Because the package is an 8-SOIC, the part also fits conventional surface-mount PCB assembly. Verify supply voltage, output configuration, and all eight physical pin positions against the manufacturer datasheet before placing it beside an embedded processor or controller.

🖥️

Processor and Memory Interface Clocks

The MK2304S-1ILFT is applicable to processor, memory, and peripheral clock routing where clock timing must remain consistent between source and load. Its 133 MHz ceiling makes it suitable for established data buses and control logic operating below that frequency, and its zero-delay function is intended to compensate for routing delay encountered between the clock source and receiving circuits. Low-skew operation is valuable when multiple destinations depend on the same reference edge. The CMOS output provides a direct fit for common digital clock signaling, while the active buffering role can isolate the source from load-dependent trace effects. Confirm interface timing, loading, voltage levels, and PLL configuration in the manufacturer documentation before replacing a passive or gate-based clock distribution arrangement.

🌐

Communications Equipment Clocking

The MK2304S-1ILFT can support clock distribution in communications equipment built around established digital logic below 133 MHz. A communications subsystem may require the reference clock to reach a transceiver, controller, or memory subsystem with tightly controlled timing, and the device’s zero-delay, low-skew buffer function is intended to reduce the effect of routing delay. Its CMOS output and PLL capability make it relevant where the clock path must be regenerated or conditioned rather than split passively. The 8-SOIC package permits routing away from connector and processor footprints that would be difficult to service. Confirm input amplitude, output loading, supply range, and bypass requirements with the Renesas manufacturer datasheet before finalizing the clock tree.

🏭

Industrial Automation Control

The MK2304S-1ILFT is suitable for industrial automation control boards that distribute a common clock to logic, measurement, and interface subsystems. The 133 MHz maximum frequency covers many conventional control and data-acquisition architectures, while low-skew buffering helps prevent clock arrival differences from creating inconsistent capture windows. CMOS output supports common digital logic, and PLL capability may be useful in more complex clock trees. Its compact 8-SOIC footprint is practical for densely populated control boards and simplifies replacement with a conventional surface-mount assembly process. Design the layout with short clock traces, a continuous ground plane, and local supply bypassing. Confirm electrical limits and environmental requirements directly from the manufacturer documentation for the deployed industrial system.

📱

Consumer and Embedded Electronics

The MK2304S-1ILFT can serve as a clock-distribution element in consumer and embedded electronic products built around legacy or mid-speed digital logic. The device provides a 133 MHz zero-delay, low-skew CMOS output from a clock input, allowing a system designer to distribute a reference clock without relying on the limited drive strength of an ordinary logic gate. Its one-circuit arrangement suits a single buffered clock path, and the 8-SOIC package offers broad compatibility with established PCB assembly methods. Consumers of older embedded platforms should still validate signal levels, timing margins, and PLL mode before using the device in a new design. Placement close to the clock consumer, short supply connections, and proper decoupling are essential for predictable behavior.

📺

Test and Measurement Instrumentation

The MK2304S-1ILFT is relevant to test and measurement instrumentation that clocks acquisition, processing, or interface logic at rates up to 133 MHz. Its zero-delay, low-skew operation can help maintain controlled relative timing between a buffered clock source and downstream circuits, while CMOS outputs match common digital acquisition and control components. The one-circuit configuration is appropriate where a single conditional or unconditioned reference clock must be regenerated for a sensitive load. The 8-SOIC package is easy to incorporate on instrument-control and high-speed digital daughtercards. Designers should minimize trace length, keep the clock path away from noisy switching nodes, and validate output loading and jitter performance against the complete instrumentation timing budget.

What is the MK2304S-1ILFT?
The Renesas Electronics MK2304S-1ILFT is a 133 MHz zero-delay, low-skew CMOS clock buffer with PLL capability. According to the Renesas manufacturer datasheet, the device contains one clock circuit, accepts a clock input, and is packaged in an 8-SOIC with a body width of 3.90 mm. It is intended for distributing high-speed clock signals where output timing relationships must remain closely controlled.
What is the operating frequency of MK2304S-1ILFT?
The MK2304S-1ILFT supports clock signals up to 133 MHz. According to the Renesas manufacturer datasheet, its maximum frequency is 133 MHz and its output stage uses CMOS signaling. This makes it appropriate for established clock domains operating below that limit, including processor, memory, communications, and embedded-control systems that do not require newer multi-gigahertz clock architectures.
Where can I download the MK2304S-1ILFT datasheet PDF?
The MK2304S-1ILFT datasheet is available through the Renesas device-document link on this page. According to the manufacturer documentation, the document identifies the component as a zero-delay, low-skew buffer with a maximum frequency of 133 MHz, one clock circuit, PLL capability, a clock input, and CMOS outputs. Use the pin-description table and recommended application circuit when assigning PCB connections.
Where can I find the MK2304S-1ILFT pinout?
The MK2304S-1ILFT pinout is found in the pin-description table of the Renesas manufacturer datasheet. The component uses an 8-SOIC package, so the schematic and PCB footprint should contain all eight package positions even if the selected configuration does not use every position. Confirm signal names, supply pins, ground pins, and any no-connect positions against that table before fabrication.
Is the MK2304S-1ILFT a zero-delay clock buffer?
Yes, the MK2304S-1ILFT is a zero-delay, low-skew buffer. According to the Renesas manufacturer datasheet, it operates to 133 MHz, accepts a clock input, provides CMOS output, and includes PLL capability. The zero-delay function is intended to offset routing delay so that distributed clocks retain tighter timing relationships than they would through ordinary logic-buffer paths.
Is MK2304S-1ILFT the same as a standard clock buffer?
The MK2304S-1ILFT is not simply a conventional logic buffer; it is specifically described as a zero-delay, low-skew clock buffer. According to the Renesas manufacturer datasheet, it reaches 133 MHz and includes PLL capability. Its clock-focused design makes it more appropriate for timing-sensitive clock distribution than a general-purpose inverter or non-zero-delay buffer with otherwise similar pin assignments.
Where can I buy MK2304S-1ILFT online?
Use the Request a Quote form on this page to inquire about Renesas Electronics MK2304S-1ILFT availability, lot conditions, and order handling. The device is listed as an active orderable 133 MHz zero-delay, low-skew clock buffer in an 8-SOIC package. Quote requests are the appropriate route for current stock, price, and shipment confirmation because commercial conditions can change.
What is the price of MK2304S-1ILFT?
Current pricing for the Renesas Electronics MK2304S-1ILFT is handled through the Request a Quote form on this page. The component is identified as a 133 MHz zero-delay, low-skew CMOS clock buffer with PLL capability in an 8-SOIC package. Submit the required quantity and packaging information to obtain a current quotation without relying on a static price that may no longer reflect market conditions.
Is MK2304S-1ILFT in stock?
Current MK2304S-1ILFT stock status should be confirmed with the Request a Quote form on this page. The Renesas Electronics device is listed as an orderable 133 MHz zero-delay, low-skew clock buffer in an 8-SOIC package. Inventory can vary by manufacturer lot, date code, and shipment configuration, so confirmation should include the quantity and required traceable-lot details.
What is the lead time for MK2304S-1ILFT?
Request the current lead time for MK2304S-1ILFT through the Request a Quote form on this page. The manufacturer device is described as a 133 MHz zero-delay, low-skew CMOS clock buffer with PLL capability in an 8-SOIC package. Lead time depends on lot availability and the requested quantity, so it should be confirmed together with assembly and delivery requirements.
What is the best drop-in replacement for MK2304S-1ILFT?
No drop-in replacement is established on this page because the available cross-reference results do not identify an alternate 8-SOIC device with a confirmed pin-to-pin layout and equivalent electrical ratings. According to the Renesas manufacturer datasheet, the target is a 133 MHz zero-delay, low-skew buffer with PLL capability. Require an exact footprint, pin-function, supply-voltage, and frequency check before approving any substitute.
What is the best cross-brand equivalent for MK2304S-1ILFT?
A cross-brand equivalent should not be selected from function alone because zero-delay clock-buffer pinouts can differ even when maximum frequency and output type look similar. The Renesas manufacturer datasheet identifies the target as a 133 MHz zero-delay, low-skew CMOS buffer with PLL capability in an 8-SOIC. Require a confirmed 8-SOIC pin mapping and comparable electrical specifications before treating another manufacturer’s device as drop-in.
When should I choose MK2304S-1ILFT instead of a passive delay line?
Choose the MK2304S-1ILFT when the design requires a buffered CMOS clock, low-skew distribution, and operation to 133 MHz. According to the Renesas manufacturer datasheet, the device has one clock circuit and PLL capability. A passive delay element may be adequate for a simple isolated trace, but it does not provide the same active buffering or controlled clock-output behavior.
Is MK2304S-1ILFT suitable for embedded control and processor clocking?
The MK2304S-1ILFT is suitable for embedded-control and processor clock domains operating within its 133 MHz limit. According to the Renesas manufacturer datasheet, the device is a zero-delay, low-skew CMOS clock buffer with PLL capability. Verify the actual clock topology, output loading, and device enable or configuration requirements in the manufacturer application information before integrating it.
What are the key specifications of MK2304S-1ILFT that engineers should know?
The key MK2304S-1ILFT specifications are a 133 MHz maximum operating frequency, zero-delay low-skew operation, one clock circuit, PLL capability, a clock input, and CMOS output. According to the Renesas manufacturer datasheet, the package is an 8-SOIC with a 3.90 mm body width. These characteristics make it principally relevant to clock distribution in established digital systems.

Datos de referencia de ingeniería para MK2304S-1ILFT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MK2304S-1ILFT when a design requires a single buffered CMOS clock operating up to 133 MHz and benefits from dedicated zero-delay, low-skew behavior. It is particularly relevant to embedded controllers, processor and memory clock trees, communications logic, industrial control boards, and established test equipment. A passive delay element may be sufficient when no active output drive or regeneration is needed, while a conventional logic inverter provides less specialized timing control. Before choosing the device, confirm its supply range, output configuration, PLL mode, loading limits, and exact 8-SOIC pin mapping. No verified drop-in alternative is listed because equivalent function alone does not establish package or pin compatibility. Any proposed replacement should be checked for exact footprint, pin functions, maximum frequency, output type, and operating electrical limits.

Comparación con alternativas

Parámetro Este producto
Device Type Zero Delay, Low Skew Buffer
Maximum Frequency 133 MHz
Number of Circuits 1 circuit
Input Type Clock
Output Type CMOS
PLL Capability Yes
Package 8-SOIC
Brand Renesas Electronics

Diferenciadores clave

  • Purpose-built zero-delay clock buffering (frente a Conventional CMOS logic buffer)
  • Integrated PLL capability (frente a Passive clock-delay element)
  • Single-circuit CMOS implementation (frente a Multi-output clock distributor)

Notas de diseño

Place the MK2304S-1ILFT close to the clock source or the load requiring regeneration, and route the clock through a short, continuous path. Avoid inserting long traces, unnecessary vias, test pads, or parallel runs beside noisy switching signals. The 8-SOIC footprint provides a conventional surface-mount assembly option, but placement quality remains important for maintaining the low-skew behavior expected from a zero-delay clock buffer.

Treat the clock connection as a controlled-impedance signal path rather than a general logic net. Maintain a continuous reference plane, use short return paths, and keep the device away from switching regulators, inductors, and high-current power paths. Confirm output loading and the complete clock topology in the Renesas manufacturer datasheet because propagation delay, skew, and usable loading determine whether the buffered clock meets the receiving circuit’s timing requirement.

Do not assume that a zero-delay buffer has zero propagation delay; the function is intended to compensate routing delay while introducing its own device timing. Likewise, do not substitute a conventional CMOS inverter or generic clock driver solely because its frequency rating appears similar. Verify all eight 8-SOIC pin functions, supply requirements, output configuration, and PLL mode against the manufacturer datasheet before releasing the PCB design.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status must be confirmed from the manufacturer documentation for the ordered device and manufacturing lot.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MK2304S-1ILFT datasheet MK2304S-1ILFT datasheet pdf MK2304S-1ILFT pinout MK2304S-1ILFT equivalent MK2304S-1ILFT replacement MK2304S-1ILFT 133MHz MK2304S-1ILFT 8-SOIC MK2304S-1ILFT zero delay buffer MK2304S-1ILFT price Renesas MK2304S-1ILFT

Componentes & términos relacionados

Renesas Electronics MK2304S-1ILFT zero-delay buffer clock buffer clock and timing IC PLL CMOS 133 MHz 8-SOIC surface-mount package low-skew clock distribution semiconductor clock input CMOS output zero-delay clock buffer industrial automation embedded control processor clocking communications equipment test and measurement instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ