MPC555LFMZP40 - 32-Bit 40MHz 448KB Flash MCU | NXP
N.º de pieza: MPC555LFMZP40 ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MPC555LFMZP40 Descripción general
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication interfaces, timers, analog functions, and control peripherals. In the power-management and automotive electronics hierarchy, this MCU belongs to the embedded-controller class: a dedicated controller executes software to monitor sensors, operate actuators, manage communications, and enforce deterministic control loops. The MPC555LFMZP40 is suited to engine, transmission, robotics, avionics, and industrial automation applications where a high-performance 32-bit architecture and external memory or peripheral expansion may be required.
Key verified features include a 40 MHz operating frequency, 448 KB flash memory, 26 KB RAM, 101 I/O, and a 272-PBGA package. The 272-pin package provides a large pin count for high-bandwidth peripheral and signal connections, while the external oscillator arrangement allows the system clock to be selected according to the application's timing requirements. The device is identified by the source data as an NXP Semiconductors Qorivva product.
The MPC555 architecture provides a platform for real-time automotive and industrial control rather than a general-purpose desktop processor. Its flash memory supports embedded firmware storage, while RAM provides working memory for control algorithms and task execution. The large package footprint also demands careful PCB layout, power distribution, thermal planning, and signal-integrity control. Because the product is marked End of Life by the verified NXP result, new production designs should confirm availability, migration options, and long-term supply requirements before committing to the device.
Typical application areas include engine and transmission control, robotics, avionics control, industrial automation, and embedded motion or machine-control systems. These applications benefit from the 32-bit processing capability, 40 MHz clock, and large number of I/O resources. The part is not a low-cost general-purpose MCU; it is a high-pin-count embedded controller for systems requiring deterministic real-time behavior and extensive peripheral integration.
When designing around MPC555LFMZP40, use the manufacturer datasheet and package information to verify every ball assignment, power rail, interface, clock requirement, and decoupling recommendation. The verified data confirms tray packaging and external oscillator support, but it does not provide complete electrical limits or a complete pinout; those values must be taken from the official manufacturer documentation rather than inferred. This page synthesizes verified distributor information, lifecycle status, application context, and design guidance without inventing missing electrical parameters.
Alternativas directas para MPC555LFMZP40 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MPC555LFMZP40 (mismo factor de forma y huella) — difiere en Package, Core Architecture, Operating Temperature Range, Program Memory Size, RAM Size.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
No hay alternativas directas disponibles para este producto.
Solicitar alternativasMPC555LFMZP40 Valores máximos y características eléctricas
| Product Type | 32-bit microcontroller |
| Processor Architecture | PowerPC |
| Operating Frequency | 40 MHz |
| Program Memory Size | 448 KB (448K x 8) |
| RAM Size | 26 KB (26K x 8) |
| Number of I/O | 101 |
| Encapsulado | 272-PBGA (27x27 mm) |
| Tipo de montaje | Surface mount |
| Oscillator Type | External |
| Packaging | Tray |
| Core | PowerPC |
| Microcontroller Family | MPC5xx |
| Series | Qorivva |
| Bit Width | 32-bit |
| Program Memory Organization | 448K x 8 |
| RAM Organization | 26K x 8 |
| Device Class | Embedded microcontroller |
Guía de configuración de pines de MPC555LFMZP40 272-pbga (27x27 mm)
Configuración de pines para MPC555LFMZP40 (encapsulado 272-pbga (27x27 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MPC555LFMZP40.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MPC555LFMZP40 es adecuado para 6 aplicacións: Automotive Engine Control, Transmission Control, Industrial Automation Control, Robotics Control, Avionics and Mission Control, Real-Time Embedded Control Platform.
Automotive Engine Control
The MPC555LFMZP40 is suited to legacy automotive engine-control platforms because it combines a 32-bit PowerPC core, 40 MHz operation, 448 KB flash, 26 KB RAM, and 101 I/O in a 272-PBGA package. These resources support real-time sensor processing, actuator control, diagnostic logic, and communication tasks. The verified product context specifically identifies engine control as an application area. For a new design, the End of Life status and unverified qualification information make supplier confirmation essential.
Recomendado
Transmission Control
A transmission-control ECU can use the MPC555LFMZP40's 40 MHz 32-bit processing capability to execute shift-control logic, sensor conditioning decisions, and real-time actuator commands. The 101 I/O count is useful for interfaces to sensors, valves, solenoids, and diagnostic networks, while 448 KB flash provides embedded firmware storage. The verified NXP and distributor descriptions identify automotive control as a target use, but application-specific safety, timing, and qualification requirements remain to be proven by the system designer.
Recomendado
Industrial Automation Control
For industrial automation, the MPC555LFMZP40 can serve as a dedicated controller for motion sequences, machine interlocks, sensor acquisition, and actuator management. Its 32-bit PowerPC architecture and 40 MHz frequency provide a higher-performance control platform than a basic 8-bit MCU, while 26 KB RAM supports working tasks and 448 KB flash stores application firmware. The large 272-PBGA package also exposes many external connections, but it increases PCB complexity, assembly cost, and layout verification effort.
Recomendado
Robotics Control
The MPC555LFMZP40 is applicable to robotics controllers that coordinate sensors, motion logic, communications, and real-time actuator behavior. Its 40 MHz 32-bit processor supports deterministic control tasks, and the 101 I/O resources can accommodate digital and analog system interfaces when configured through the device's documented peripherals. The verified product result identifies robotics as an application context. Developers should verify the exact peripheral set, electrical limits, and software ecosystem before selecting this EOL controller for a new platform.
Recomendado
Avionics and Mission Control
The MPC555LFMZP40's 32-bit architecture, 40 MHz clock, and integrated flash and RAM can support embedded avionics or mission-control functions that require deterministic firmware execution and broad external connectivity. The verified search context names avionics control as a target application. However, avionics use normally requires system-level safety, environmental, qualification, and certification evidence that is not present in the supplied data, so this part should not be assumed suitable without a complete engineering review.
Recomendado
Real-Time Embedded Control Platform
MPC555LFMZP40 can form the core of a real-time embedded platform when a design needs more processing performance and I/O than a small microcontroller provides. The 448 KB flash and 26 KB RAM provide a defined firmware and working-memory footprint, while the 101 I/O count supports multiple external interfaces. The 272-PBGA package demands advanced PCB assembly and inspection, and the End of Life status makes long-term sourcing a central design constraint. Legacy maintenance or production-continuation programs are the most practical use cases.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC555LFMZP40 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Product Type | 32-bit PowerPC microcontroller |
| Operating Frequency | 40 MHz |
| Program Memory | 448 KB (448K x 8) |
| RAM | 26 KB (26K x 8) |
| I/O Count | 101 |
| Oscillator | External |
| Package | 272-PBGA (27x27 mm) |
| Brand | NXP Semiconductors |
| Lifecycle Status | End of Life |
| Mounting Type | Surface mount |
Diferenciadores clave
- MPC555LFMZP40 provides a 32-bit PowerPC core at 40 MHz (frente a MC9S12DP512CPVER)
- MPC555LFMZP40 integrates 448 KB flash and 26 KB RAM (frente a MC9S12DP512CPVER)
- MPC555LFMZP40 offers 101 I/O in a 272-PBGA package (frente a MC68376BGVAB25)
Notas de diseño
Do not substitute an MPC555-family ordering code based only on the core name. The verified comparison results mention MPC555LFCVR40 and MPC555LFAZP40, but they do not establish identical PBGA packages, ball assignments, electrical limits, or software compatibility. Check the official suffix definition, package drawing, pin map, memory map, and manufacturer lifecycle documentation before approving any replacement.
The 272-PBGA package requires a high-density PCB land pattern and careful ball-to-pad alignment. Verify the official package drawing, ball map, solder-mask and paste recommendations, via-in-pad requirements, and assembly process with the PCB designer. Do not infer unused-ball connections or power distribution from generic PBGA layouts.
Use the manufacturer datasheet for the exact power-supply rails, sequencing, decoupling, and I/O voltage limits. The supplied search data confirms an external oscillator but does not state operating voltage or pin-level limits. Confirm those values before placing capacitors or defining level-shifting interfaces, because incorrect rail assumptions can damage an EOL device or compromise signal integrity.
Assess thermal performance for the complete 272-PBGA assembly rather than only the IC junction. The supplied data does not provide thermal resistance, maximum junction temperature, or ambient limits, so those values must be obtained from the manufacturer datasheet. Use the PCB's copper, vias, enclosure, and neighboring heat sources as part of the thermal model before production release.
Because the NXP result marks MPC555LFMZP40 End of Life, preserve the original datasheet, firmware toolchain, board files, and qualification records. Track distributor stock, last-time-buy opportunities, and approved alternate sourcing. If the device is used in a safety- or production-critical system, validate every incoming lot and avoid assuming that all inventory is equivalent or current.
Información de cumplimiento
The supplied verified results identify automotive applications and an End of Life status but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than inferred.