MPC8379VRAGD - 400MHz PowerQUICC II Pro MPU | NXP | 689-BGA
N.º de pieza: MPC8379VRAGD ✗ Fin de vidaMPC8379VRAGD Descripción general
A PowerPC microprocessor is a reduced-instruction-set computing (RISC) processor originally designed by the AIM alliance (Apple, IBM, Motorola) and now maintained by NXP for embedded applications. PowerQUICC II Pro extends the original PowerQUICC architecture with integrated peripherals for communications processing, encryption acceleration, and DDR memory control. Within the hierarchy, a microprocessor belongs to the broader category of processors, alongside microcontrollers (MCU), DSPs, and application processors. The MPC83xx series specifically targets SOHO routers, industrial control, and networked storage.
Key features of the MPC8379VRAGD include a 400 MHz e300c4s core, single-core 32-bit operation, integrated DDR memory controller, dual 10/100/1000 Ethernet MACs, USB 2.0, PCI Express, and security acceleration engines on the E-variant (absent on the standard MPC8379VRAGD). The IC operates from a 1 V core supply voltage and integrates common networking peripherals, reducing external component count in router, gateway, and NAS designs.
The architecture pairs the e300c4s execution core with a QUICC Engine communications processor module for offloading packet processing, enabling line-rate throughput without burdening the host CPU. This heterogeneous dual-engine design is the hallmark of the PowerQUICC II Pro family and is often selected where deterministic networking performance is required alongside general-purpose Linux or VxWorks application hosting.
Typical applications for MPC8379VRAGD include small-office/home-office (SOHO) routers, networked attached storage (NAS) controllers, industrial gateways, protocol converters, and embedded Linux appliances. The wide peripheral integration also makes it a candidate for printer controllers and point-of-sale terminals requiring both networking and general-purpose compute.
When designing with this device, ensure the PCB layout follows the TEPBGA II 31 x 31 mm land pattern with matched-impedance routing for DDR memory and Ethernet signals. Power sequencing of the 1 V core and 3.3 V I/O rails must follow the order specified in the manufacturer datasheet to avoid latch-up during power-up.
This page consolidates distributor pricing, drop-in alternative BGA parts, and practical design considerations not found in a single datasheet, giving engineers an actionable comparison reference for MPC8300-series microprocessors.
Alternativas directas para MPC8379VRAGD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MPC8379VRAGD (mismo factor de forma y huella) — difiere en Core Architecture, RoHS Status, Security Engine.
MPC8379EVRAGD
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MPC8379CVRAGD
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPC8378VRAGD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8377VRAGD
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPC8360EVRAGD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8379VRAGD Valores máximos y características eléctricas
| Processor Type | MPC83xx PowerQUICC II Pro 32-Bit |
| Core Architecture | PowerPC e300c4s |
| Number of Cores | 1 |
| Ancho del bus de datos | 32-bit |
| Frecuencia de reloj máxima | 400 MHz |
| Core Supply Voltage | 1 V |
| Encapsulado / Carcasa | 689-BBGA Exposed Pad (TEPBGA II 31x31) |
| Tipo de montaje | Surface Mount |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| Estado RoHS | RoHS Compliant |
| Integrated Peripherals | DDR memory controller, dual GbE MACs, USB 2.0, PCIe |
| Security Engine | Not present (no-PB / non-E variant) |
| Family | MPC8300 / MPC8379 series |
| Encryption Variant | MPC8379VRAGD (no encryption accelerator) |
Guía de configuración de pines de MPC8379VRAGD 689-bbga exposed pad (tepbga ii 31x31)
Configuración de pines para MPC8379VRAGD (encapsulado 689-bbga exposed pad (tepbga ii 31x31)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MPC8379VRAGD.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MPC8379VRAGD es adecuado para 6 aplicacións: SOHO Router and Small-Business Gateway, Network-Attached Storage (NAS) Controller, Industrial Protocol Gateway, Embedded Linux Appliance, Printer and MFP Controller, Point-of-Sale (POS) Terminal.
SOHO Router and Small-Business Gateway
The MPC8379VRAGD fits SOHO router designs because its 400 MHz e300c4s core delivers enough compute for routing, NAT, and firewall workloads while the integrated dual Gigabit Ethernet MACs handle WAN-LAN bridging without external PHY bridge chips. The QUICC Engine offloads packet classification from the host CPU, sustaining line-rate throughput on GbE interfaces. Compared with a discrete MPU plus GbE switch solution, the MPC8379VRAGD's integrated peripherals reduce BOM count and PCB area, while its 689-TEPBGA II package preserves thermal headroom in fanless router enclosures. Power consumption at full CPU utilization is governed by the 1 V core rail and scales with traffic load.
Recomendado
Network-Attached Storage (NAS) Controller
In NAS controllers for small-business and home-server products, the MPC8379VRAGD runs the storage management stack (SMB/NFS/iSCSI) on its 400 MHz e300c4s core while the integrated SATA and GbE interfaces attach directly to disk drives and the network. The DDR memory controller supports the large working sets required by caching and RAID metadata operations. Compared with a general-purpose ARM Cortex-A MPU, the MPC8379VRAGD's deterministic QUICC Engine packet handling delivers predictable I/O latency for file-serving workloads. Its 689-TEPBGA II package requires careful PCB thermal design when fully loaded with multiple SATA drives.
Recomendado
Industrial Protocol Gateway
The MPC8379VRAGD is well-suited for industrial gateways translating Modbus, PROFINET, EtherNet/IP, or serial protocols between field devices and Ethernet backbones. Its 32-bit PowerPC e300c4s core at 400 MHz runs real-time operating systems (RTOS) or embedded Linux to host protocol stacks, while the integrated Ethernet and serial peripherals eliminate external bridge ICs. Industrial-grade parts can operate across extended temperature ranges per the manufacturer datasheet. The 689-TEPBGA II footprint with exposed pad enables reliable thermal performance in sealed industrial enclosures, providing years of maintenance-free operation.
Recomendado
Embedded Linux Appliance
The MPC8379VRAGD hosts embedded Linux distributions targeting industrial appliances such as building automation controllers, security panels, or remote sensor aggregation hubs. Its 400 MHz e300c4s core provides the headroom required for full Linux kernel, file system, and networking stack while the integrated DDR controller supports the larger memory footprint typical of Linux deployments. The 689-TEPBGA II package is footprint-compatible across the MPC8300 family, simplifying board variants for different feature mixes. Boot is typically from NOR flash or SPI with main image on NAND or eMMC behind a local bus.
Recomendado
Printer and MFP Controller
Multi-function printer (MFP) controllers rely on the MPC8379VRAGD's combination of processing throughput and peripheral integration to drive the print engine, scan subsystem, and network interfaces simultaneously. The e300c4s core at 400 MHz handles job queuing, image rendering, and PCL/PostScript interpreters, while the integrated Ethernet and USB peripherals provide the connectivity users expect from networked office equipment. Compared with discrete processor-plus-controller chip designs, the integrated architecture lowers BOM cost and simplifies EMC compliance by reducing high-speed signal traces. Thermal design must account for the 689-TEPBGA II package.
Recomendado
Point-of-Sale (POS) Terminal
POS terminals benefit from the MPC8379VRAGD's deterministic real-time performance and rich peripheral set, which together manage barcode scanners, receipt printers, payment terminals, and Ethernet back-office connectivity. The 400 MHz PowerPC core runs the terminal application stack and encryption routines for payment data, while DDR memory and integrated GbE MACs sustain fast transaction throughput. The 689-TEPBGA II footprint provides a stable mechanical platform for the ruggedized chassis typical of retail POS hardware. Operating temperature and reliability targets align with industrial-grade MPU variants of this family.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC8379VRAGD — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPC8379EVRAGD | MPC8378VRAGD | MPC8377VRAGD | MPC8360EVRAGD |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Core Architecture | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c3 |
| Maximum Clock Frequency | 400 MHz | 400 MHz | 400 MHz | 400 MHz | up to 667 MHz |
| Encryption Engine | Not present (no-PB variant) | Present (E variant) | Not present | Not present | Present (E variant) |
| DDR Memory Controller | DDR2 | DDR2 | DDR2 | DDR2 | DDR1 |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
| Pin Compatibility | Reference | Drop-in | Drop-in | Drop-in | Drop-in (same footprint) |
Diferenciadores clave
- Lower-cost no-PB variant for designs without encryption offload (frente a MPC8379EVRAGD)
- Newer DDR2 controller vs older family members (frente a MPC8360EVRAGD)
- Single 1 V core rail simplifies PMIC design (frente a MPC8379CVRAGD)
Notas de diseño
The 689-TEPBGA II (31x31 mm) package requires careful PCB thermal management because the die is large and the package exposes its pad through the bottom for heat dissipation. Estimated: at 1 GHz-equivalent worst-case CPU utilization on the 1 V core, expect 4-6 W dissipation that must be conducted through the BGA ground/power plane stack-up. Use a 4-layer board with at least two solid internal ground planes stitching under the part, and follow the manufacturer thermal via array pattern under the exposed pad. Verify junction temperature against the system thermal budget with the manufacturer theta_JA value.
Route matched-impedance differential pairs (Ethernet, PCIe) per the manufacturer IBIS models and reference design. Estimated: a 100-ohm differential impedance with 5 mil trace on a 4-layer stack-up typically requires a 6-8 mil dielectric to the nearest reference plane. The DDR2 memory controller needs tight length matching across the address/command and clock groups; consult the manufacturer DDR2 design guide for tJITTER and skew budgets.
Do not power the 1 V core rail before the 3.3 V I/O rail, otherwise the I/O buffers may be back-driven through the ESD structures and latch-up can occur. Decoupling must include high-frequency ceramic (0.1 uF X7R) on every power pin plus bulk polymer or ceramic capacitors near the BGA edges. Verify boot mode configuration pins are pulled to the correct logic levels before the POR signal is released, or the part may fail to start. Estimated: a 10 ms reset-to-clock delay is typical before boot ROM sampling takes effect.
Información de cumplimiento
RoHS and lead-free status confirmed per DigiKey product listing. Halogen-free status not stated in available data. Not AEC-Q100 qualified - this is a commercial/industrial MPU. Reach compliance inferred from NXP general policy.
