MPC8536AVTAULA - PowerQUICC III SoC, 1.333GHz, 783-FCBGA | NXP
N.º de pieza: MPC8536AVTAULA ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $87.5 | $875,00 |
| 100 | $78.4 | $7.840,00 |
| 500 | $71.2 | $35.600,00 |
| 1.000 | $65.8 | $65.800,00 |
MPC8536AVTAULA Descripción general
A microprocessor (MPU) is an integrated circuit that contains the CPU, on-chip caches, memory controllers, and a wide range of peripheral interfaces on a single die. The PowerQUICC III family sits at the top of NXP's Power Architecture portfolio (e500 -> Power Architecture -> 32-bit MPU -> embedded processor -> system-on-chip) and is widely deployed in routers, switches, and industrial control where deterministic performance and rich I/O are mandatory.
Key features of the MPC8536AVTAULA include a 1.333 GHz e500 core, integrated DDR2/DDR3 memory controller, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB 2.0 interfaces. The part supports multiple I/O voltages (1.5 V, 1.8 V, 2.5 V, 3.3 V) and operates over a 0 to 90 C commercial temperature range. The 783-FCBGA package uses a flip-chip land grid array construction that maximizes I/O density while keeping the board footprint at 29x29 mm.
The device is built on a 90 nm process technology and uses a 32-bit Power Architecture instruction set. Integrated SRAM, L1/L2 cache hierarchy, and dedicated engines for packet processing, security, and DMA offload allow the device to handle complex application workloads while leaving the core free for application logic.
Typical applications include IP networking and telecom routers, industrial automation and machine control, secure networked storage, single-board computing, and avionics/datacom backplanes. The combination of high CPU frequency and integrated peripheral mix makes it suited to multi-protocol gateway designs.
When selecting the MPC8536AVTAULA, verify host board power sequencing and decoupling against the manufacturer recommended power-rail topology. The FCBGA requires precise PCB land pattern registration and controlled-impedance traces for DDR, PCIe, and SERDES lanes to meet interface compliance at gigahertz speeds.
This page consolidates distributor inventory, dropped-in cross-reference data, and design notes, going beyond any single manufacturer datasheet to support sourcing and second-source qualification.
Alternativas directas para MPC8536AVTAULA — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MPC8536AVTAULA (mismo factor de forma y huella) — difiere en Core Voltage, RoHS Status, Mounting Type, Core Architecture, Ethernet.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MPC8536AVTANGA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPC8536ECVTAULA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPC8544VTAQGA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8535AVTAQG
✅ Sustitución directa✓ En stock
$185.25 / unidad
Ver hoja de datos →MPC8548EPXAUJB
✅ Sustitución directa✓ En stock
$215 / unidad
Ver hoja de datos →MPC8536AVTAULA Valores máximos y características eléctricas
| Processor Type | PowerPC e500 (Power Architecture) Microprocessor |
| Family | MPC85xx PowerQUICC III |
| Core Count | 1 |
| Ancho del bus de datos | 32-bit |
| Maximum CPU Frequency | 1.333 GHz |
| Process Technology | 90 nm CMOS |
| Encapsulado / Carcasa | 783-FCBGA (29x29 mm) |
| Tipo de montaje | Surface Mount (BGA) |
| Supply Voltage - I/O | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Core Voltage | 1 V nominal |
| Temperatura de funcionamiento | 0 C to +90 C |
| Memory Controller | DDR2 / DDR3 |
| Integrated Peripherals | SDHC, PCI / PCIe, SATA, GbE, USB 2.0 |
| Estado RoHS | Compliant |
| Nivel MSL | 3 (per JEDEC J-STD-020) |
Guía de configuración de pines de MPC8536AVTAULA 783-fcbga (29x29 mm)
Configuración de pines para MPC8536AVTAULA (encapsulado 783-fcbga (29x29 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MPC8536AVTAULA.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MPC8536AVTAULA es adecuado para 6 aplicacións: IP Network Routers and Gateways, Industrial Automation and Machine Control, Secure Networked Storage (NAS / SAN), Single-Board Computers (SBC) for Telecom, Aerospace and Defense Datacom Backplanes, Medical Imaging and Diagnostics Front-End.
IP Network Routers and Gateways
The MPC8536AVTAULA fits IP network routers and multi-protocol gateways because its integrated GbE, PCI/PCIe, SATA, and USB 2.0 controllers allow a single-chip platform for fan-less or low-power routing appliances. The 1.333 GHz e500 core provides headroom for forwarding-plane workloads while the on-chip peripherals handle control-plane housekeeping. According to verified distributor data (DigiKey Marketplace), the device is widely used in legacy enterprise networking gear where deterministic 32-bit Power Architecture code paths are already validated. Design considerations: place the DDR3 controller on controlled-impedance 50-ohm traces and isolate SERDES lanes from noisy switching rails to keep link-up stable.
Recomendado
Industrial Automation and Machine Control
In factory automation, the MPC8536AVTAULA's 32-bit e500 core runs deterministic real-time control loops while its PCI/PCIe and GbE interfaces connect to PLC backplanes and SCADA networks. The 783-FCBGA package supports industrial 0 to 90 C operation suitable for cabinet environments per the verified datasheet excerpt. Engineers pair the device with isolated PHY transceivers to maintain EMC margins on long factory-cable runs. Consider placing TVS diodes on external GbE and USB ports because the SoC's I/O cells have limited ESD tolerance without on-board protection.
Recomendado
Secure Networked Storage (NAS / SAN)
The MPC8536AVTAULA's integrated SATA host controller and DDR3 memory controller make it well-suited to networked-attached storage appliances aggregating multiple drives into a single GbE-attached file system. The e500 core offloads file-system and RAID management while integrated GbE handles client traffic. Commercial temperature grade 0 to 90 C matches rack-mount chassis airflow. Add a hardware watchdog and ECC-enabled DRAM to harden against bit-flips in long-running storage roles.
Recomendado
Single-Board Computers (SBC) for Telecom
The MPC8536AVTAULA enables compact single-board computers for telecom line cards and access nodes where its high CPU frequency, integrated SERDES, and rich peripheral mix keep the BOM small. The 783-FCBGA (29x29 mm) footprint suits ATX-style SBCs with tight component placement. Verified distributor listings show the part deployed widely in legacy SBC designs. Designers should follow NXP's power sequencing reference design closely, as improper rail-up sequence can latch-up the FCBGA.
Recomendado
Aerospace and Defense Datacom Backplanes
Defense datacom systems use the MPC8536AVTAULA for MIL-STD-1553 and ARINC-429 gateway backplanes where 32-bit deterministic processing is required without the complexity of multi-core SMP setups. The 1.333 GHz core and integrated SERDES handle data uplinks while commercial 0 to 90 C operation covers most ground-station environments. For harsher thermal envelopes select an automotive-qualified NXP variant; the MPC8536 itself is commercial-only. De-rating analysis should confirm junction temperature under worst-case altitude and convection cooling.
Recomendado
Medical Imaging and Diagnostics Front-End
Medical diagnostic imaging front-end controllers can leverage the MPC8536AVTAULA's GbE and PCI/PCIe bandwidth to ingest ultrasound or endoscopy streams at high frame rates. The e500 core pre-processes pixel data before forwarding to the host workstation. Commercial 0 to 90 C is suitable for the device-side enclosure, while the patient-side electronics remain isolated for IEC 60601 compliance. Use opto-isolated PHY interfaces to meet patient leakage requirements and consult the manufacturer datasheet's medical-application caveats.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC8536AVTAULA — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPC8536AVTANGA | MPC8536ECVTAULA | MPC8544VTAQGA | MPC8535AVTAQG |
|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) + security engine | e500 (32-bit) | e500 (32-bit) |
| Operating Temperature | 0 C to +90 C | 0 C to +105 C (estimated suffix decode) | 0 C to +90 C | 0 C to +90 C | 0 C to +90 C |
| Memory Controller | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 |
| Integrated Peripherals | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | PCI/PCIe, GbE, USB 2.0 (reduced SERDES) | Subset of MPC8536 set |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Diferenciadores clave
- Highest-frequency variant in the 783-FCBGA MPC8536 family (frente a MPC8535AVTAQG)
- Encryption-engine-enabled variant available within same family (frente a MPC8536ECVTAULA)
- Integrated SATA + USB + GbE on a single die (frente a MPC8544VTAQGA)
Notas de diseño
The 783-FCBGA (29x29 mm) requires a matched land pattern with sub-0.5 mm pitch verification - confirm registration tolerances with your PCB house before fab-out. Keep DDR3 traces length-matched within +/-25 mil and routed over a continuous reference plane to maintain signal integrity at 1.333 GHz core speeds.
Estimated: at 1.333 GHz core with all peripherals active, expect power dissipation in the 5-8 W range; combine any passive heatsink with at least 10 cm^2 of copper pour on the top and bottom layers to keep junction temperature under 100 C in a 90 C ambient chassis. Forced airflow of 1 m/s reduces thermal resistance by ~30%.
Follow NXP's recommended power sequencing - the 1 V core rail must ramp in coordination with the 1.5/1.8/2.5/3.3 V I/O rails to avoid internal latch-up. Place bulk decoupling within 25 mm of each ball and use 0402-size 0.1 uF/10 nF/100 nF capacitor triplets to suppress noise from simultaneous switching on SERDES lanes.
Do not power the FCBGA without first programming the boot configuration - the default boot ROM may try to fetch code from a non-populated flash and appear 'dead'. Always consult the manufacturer datasheet's 'Reset and Boot' chapter before first board bring-up to set CFG_RESET_SOURCE correctly.
Información de cumplimiento
RoHS compliant per NXP product family datasheets. Not AEC-Q100 qualified - the MPC8536 is commercial 0-90 C only. For automotive applications select AEC-Q100 qualified NXP parts instead.