MPC8536AVTAULA - PowerQUICC III SoC, 1.333GHz, 783-FCBGA | NXP
부품 번호: MPC8536AVTAULA ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $95 | $95.00 |
| 10 | $87.5 | $875.00 |
| 100 | $78.4 | $7,840.00 |
| 500 | $71.2 | $35,600.00 |
| 1,000 | $65.8 | $65,800.00 |
MPC8536AVTAULA 개요
A microprocessor (MPU) is an integrated circuit that contains the CPU, on-chip caches, memory controllers, and a wide range of peripheral interfaces on a single die. The PowerQUICC III family sits at the top of NXP's Power Architecture portfolio (e500 -> Power Architecture -> 32-bit MPU -> embedded processor -> system-on-chip) and is widely deployed in routers, switches, and industrial control where deterministic performance and rich I/O are mandatory.
Key features of the MPC8536AVTAULA include a 1.333 GHz e500 core, integrated DDR2/DDR3 memory controller, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB 2.0 interfaces. The part supports multiple I/O voltages (1.5 V, 1.8 V, 2.5 V, 3.3 V) and operates over a 0 to 90 C commercial temperature range. The 783-FCBGA package uses a flip-chip land grid array construction that maximizes I/O density while keeping the board footprint at 29x29 mm.
The device is built on a 90 nm process technology and uses a 32-bit Power Architecture instruction set. Integrated SRAM, L1/L2 cache hierarchy, and dedicated engines for packet processing, security, and DMA offload allow the device to handle complex application workloads while leaving the core free for application logic.
Typical applications include IP networking and telecom routers, industrial automation and machine control, secure networked storage, single-board computing, and avionics/datacom backplanes. The combination of high CPU frequency and integrated peripheral mix makes it suited to multi-protocol gateway designs.
When selecting the MPC8536AVTAULA, verify host board power sequencing and decoupling against the manufacturer recommended power-rail topology. The FCBGA requires precise PCB land pattern registration and controlled-impedance traces for DDR, PCIe, and SERDES lanes to meet interface compliance at gigahertz speeds.
This page consolidates distributor inventory, dropped-in cross-reference data, and design notes, going beyond any single manufacturer datasheet to support sourcing and second-source qualification.
드롭인 대체품: MPC8536AVTAULA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8536AVTAULA (동일 폼 팩터 및 풋프린트) — 차이점: Core Voltage, RoHS Status, Mounting Type, Core Architecture, Ethernet.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8536AVTANGA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536ECVTAULA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8544VTAQGA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8535AVTAQG
✅ 드롭인✓ 재고 있음
$185.25 / 개
데이터시트 보기 →MPC8548EPXAUJB
✅ 드롭인✓ 재고 있음
$215 / 개
데이터시트 보기 →MPC8536AVTAULA 최대 정격 & 전기적 특성
| Processor Type | PowerPC e500 (Power Architecture) Microprocessor |
| Family | MPC85xx PowerQUICC III |
| Core Count | 1 |
| 데이터 버스 폭 | 32-bit |
| Maximum CPU Frequency | 1.333 GHz |
| Process Technology | 90 nm CMOS |
| 패키지 / 케이스 | 783-FCBGA (29x29 mm) |
| 실장 유형 | Surface Mount (BGA) |
| Supply Voltage - I/O | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Core Voltage | 1 V nominal |
| 동작 온도 | 0 C to +90 C |
| Memory Controller | DDR2 / DDR3 |
| Integrated Peripherals | SDHC, PCI / PCIe, SATA, GbE, USB 2.0 |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 (per JEDEC J-STD-020) |
MPC8536AVTAULA 783-fcbga (29x29 mm) 핀 구성 가이드
MPC8536AVTAULA(783-fcbga (29x29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8536AVTAULA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8536AVTAULA 적합 용도: 6 애플리케이션s: IP Network Routers and Gateways, Industrial Automation and Machine Control, Secure Networked Storage (NAS / SAN), Single-Board Computers (SBC) for Telecom, Aerospace and Defense Datacom Backplanes, Medical Imaging and Diagnostics Front-End.
IP Network Routers and Gateways
The MPC8536AVTAULA fits IP network routers and multi-protocol gateways because its integrated GbE, PCI/PCIe, SATA, and USB 2.0 controllers allow a single-chip platform for fan-less or low-power routing appliances. The 1.333 GHz e500 core provides headroom for forwarding-plane workloads while the on-chip peripherals handle control-plane housekeeping. According to verified distributor data (DigiKey Marketplace), the device is widely used in legacy enterprise networking gear where deterministic 32-bit Power Architecture code paths are already validated. Design considerations: place the DDR3 controller on controlled-impedance 50-ohm traces and isolate SERDES lanes from noisy switching rails to keep link-up stable.
추천
Industrial Automation and Machine Control
In factory automation, the MPC8536AVTAULA's 32-bit e500 core runs deterministic real-time control loops while its PCI/PCIe and GbE interfaces connect to PLC backplanes and SCADA networks. The 783-FCBGA package supports industrial 0 to 90 C operation suitable for cabinet environments per the verified datasheet excerpt. Engineers pair the device with isolated PHY transceivers to maintain EMC margins on long factory-cable runs. Consider placing TVS diodes on external GbE and USB ports because the SoC's I/O cells have limited ESD tolerance without on-board protection.
추천
Secure Networked Storage (NAS / SAN)
The MPC8536AVTAULA's integrated SATA host controller and DDR3 memory controller make it well-suited to networked-attached storage appliances aggregating multiple drives into a single GbE-attached file system. The e500 core offloads file-system and RAID management while integrated GbE handles client traffic. Commercial temperature grade 0 to 90 C matches rack-mount chassis airflow. Add a hardware watchdog and ECC-enabled DRAM to harden against bit-flips in long-running storage roles.
추천
Single-Board Computers (SBC) for Telecom
The MPC8536AVTAULA enables compact single-board computers for telecom line cards and access nodes where its high CPU frequency, integrated SERDES, and rich peripheral mix keep the BOM small. The 783-FCBGA (29x29 mm) footprint suits ATX-style SBCs with tight component placement. Verified distributor listings show the part deployed widely in legacy SBC designs. Designers should follow NXP's power sequencing reference design closely, as improper rail-up sequence can latch-up the FCBGA.
추천
Aerospace and Defense Datacom Backplanes
Defense datacom systems use the MPC8536AVTAULA for MIL-STD-1553 and ARINC-429 gateway backplanes where 32-bit deterministic processing is required without the complexity of multi-core SMP setups. The 1.333 GHz core and integrated SERDES handle data uplinks while commercial 0 to 90 C operation covers most ground-station environments. For harsher thermal envelopes select an automotive-qualified NXP variant; the MPC8536 itself is commercial-only. De-rating analysis should confirm junction temperature under worst-case altitude and convection cooling.
추천
Medical Imaging and Diagnostics Front-End
Medical diagnostic imaging front-end controllers can leverage the MPC8536AVTAULA's GbE and PCI/PCIe bandwidth to ingest ultrasound or endoscopy streams at high frame rates. The e500 core pre-processes pixel data before forwarding to the host workstation. Commercial 0 to 90 C is suitable for the device-side enclosure, while the patient-side electronics remain isolated for IEC 60601 compliance. Use opto-isolated PHY interfaces to meet patient leakage requirements and consult the manufacturer datasheet's medical-application caveats.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8536AVTAULA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8536AVTANGA | MPC8536ECVTAULA | MPC8544VTAQGA | MPC8535AVTAQG |
|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | e500 (32-bit) | e500 (32-bit) | e500 (32-bit) + security engine | e500 (32-bit) | e500 (32-bit) |
| Operating Temperature | 0 C to +90 C | 0 C to +105 C (estimated suffix decode) | 0 C to +90 C | 0 C to +90 C | 0 C to +90 C |
| Memory Controller | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 | DDR2 / DDR3 |
| Integrated Peripherals | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | SDHC, PCI/PCIe, SATA, GbE, USB 2.0 | PCI/PCIe, GbE, USB 2.0 (reduced SERDES) | Subset of MPC8536 set |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
주요 차별점
- Highest-frequency variant in the 783-FCBGA MPC8536 family (vs MPC8535AVTAQG)
- Encryption-engine-enabled variant available within same family (vs MPC8536ECVTAULA)
- Integrated SATA + USB + GbE on a single die (vs MPC8544VTAQGA)
설계 노트
The 783-FCBGA (29x29 mm) requires a matched land pattern with sub-0.5 mm pitch verification - confirm registration tolerances with your PCB house before fab-out. Keep DDR3 traces length-matched within +/-25 mil and routed over a continuous reference plane to maintain signal integrity at 1.333 GHz core speeds.
Estimated: at 1.333 GHz core with all peripherals active, expect power dissipation in the 5-8 W range; combine any passive heatsink with at least 10 cm^2 of copper pour on the top and bottom layers to keep junction temperature under 100 C in a 90 C ambient chassis. Forced airflow of 1 m/s reduces thermal resistance by ~30%.
Follow NXP's recommended power sequencing - the 1 V core rail must ramp in coordination with the 1.5/1.8/2.5/3.3 V I/O rails to avoid internal latch-up. Place bulk decoupling within 25 mm of each ball and use 0402-size 0.1 uF/10 nF/100 nF capacitor triplets to suppress noise from simultaneous switching on SERDES lanes.
Do not power the FCBGA without first programming the boot configuration - the default boot ROM may try to fetch code from a non-populated flash and appear 'dead'. Always consult the manufacturer datasheet's 'Reset and Boot' chapter before first board bring-up to set CFG_RESET_SOURCE correctly.
규정 준수 정보
RoHS compliant per NXP product family datasheets. Not AEC-Q100 qualified - the MPC8536 is commercial 0-90 C only. For automotive applications select AEC-Q100 qualified NXP parts instead.