PEX8713-CA80BC - 12-Lane 10-Port PCIe Gen 3 Switch | Broadcom
N.º de pieza: PEX8713-CA80BC ✓ ActivoPEX8713-CA80BC Descripción general
A PCI Express switch is a semiconductor in the interface-IC hierarchy that routes PCI Express traffic between a host or root complex and multiple endpoints. Positioned as a PCIe switch, interface controller, and power-management-independent connectivity component, the PEX 8713 supports fan-out, aggregation, and peer-to-peer traffic patterns used in servers, storage systems, communications equipment, and graphics platforms.
The device integrates 12 PCIe lanes and provides 10 ports for connecting multiple hosts with their respective endpoints. Its PCI Express Gen 3 SerDes operates at 8.0 GT/s per lane, enabling a high aggregate link bandwidth of 96.0 GT/s when all 12 lanes are active. This bandwidth calculation uses the stated 8.0 GT/s per-lane rate and 12-lane configuration.
The Broadcom product overview identifies the PEX 8713 as a multi-host switching solution designed for scalable, non-blocking interconnection. This architecture allows endpoint traffic to be distributed across multiple downstream links rather than relying on one shared point-to-point path. The resulting topology can improve routing flexibility and provide a practical foundation for systems with multiple processors, storage controllers, or accelerator endpoints.
Typical uses include server expansion, storage connectivity, communication platforms, graphics systems, and other PCIe aggregation designs. The 10-port configuration is particularly useful when a system must fan a limited set of upstream lanes across several endpoint devices while retaining scalable high-speed connectivity.
Board design requires careful high-speed signal-integrity work. Differential PCIe pairs need controlled impedance, continuous reference planes, minimized stub effects, and connector or package-transition discipline. Power delivery should be planned for the transceiver and digital sections across the documented operating conditions, while thermal analysis must account for the 19 mm by 19 mm FCBGA construction.
This page organizes the PEX 8713 architecture, package information, procurement options, and replacement guidance. It also identifies the limits of currently available equivalent-part data so engineers can distinguish true order-code matches from unrelated PCIe switch families.
Alternativas directas para PEX8713-CA80BC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
PEX8713-CA80BC-G
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PEX8713-CA80BCG
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PEX8713-CA80BC Valores máximos y características eléctricas
| Device Type | PCI Express Gen 3 switch IC |
| PCI Express Generation | Gen 3 |
| Total Lanes | 12 lanes |
| Port Count | 10 ports |
| SerDes Data Rate | 8.0 GT/s per lane |
| Aggregate Lane Data Rate | 96.0 GT/s across 12 lanes |
| SerDes Integration | Integrated 8.0 GT/s SerDes |
| Switch Architecture | Multi-host, non-blocking PCIe switch |
| Supported Traffic Patterns | Fan-out, aggregation, and peer-to-peer traffic |
| Package Type | 324-pin FCBGA |
| Package Dimensions | 19 mm x 19 mm |
| Manufacturer | Broadcom |
| Primary Application | Server, storage, communications, and graphics platforms |
Guía de configuración de pines de PEX8713-CA80BC 19 mm x 19 mm
Configuración de pines para PEX8713-CA80BC (encapsulado 19 mm x 19 mm). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para PEX8713-CA80BC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PEX8713-CA80BC es adecuado para 6 aplicacións: Multi-Host Server Expansion, Storage Controller Aggregation, PCIe Communication Equipment, Graphics and Accelerator Networking, Endpoint Fan-Out, Peer-to-Peer PCIe Systems.
Multi-Host Server Expansion
The PEX8713-CA80BC fits server expansion designs that require a root complex or host to reach multiple downstream endpoints through a dedicated switching fabric. Its 12 lanes and 10 ports provide a broad connection matrix, while integrated 8.0 GT/s SerDes supports Gen 3 traffic without requiring a separate switch controller. The multi-host architecture can organize accelerator, storage, and communication endpoints behind a scalable, non-blocking path. Board planning should preserve continuous reference planes, control PCIe lane length skew, and allocate separate power distribution for analog, digital, and auxiliary supplies. Firmware and the configuration mechanism should also be validated alongside the physical layout before production release.
Recomendado
Storage Controller Aggregation
The PEX8713-CA80BC can aggregate storage-controller traffic behind a multi-host PCIe switching layer. Ten ports allow several endpoint paths to be organized without forcing every device onto a single shared upstream link, while the 12-lane Gen 3 fabric provides 8.0 GT/s signaling per lane. This topology is useful when storage controllers, management processors, and host-facing paths must operate concurrently. Designers should use the manufacturer reference layout for high-speed routing, keep connector and package transitions controlled, and validate return paths beneath every differential pair. Queueing behavior, congestion tolerance, and firmware-based traffic management must be checked with the intended storage workload rather than inferred from port count alone.
Recomendado
PCIe Communication Equipment
The PEX8713-CA80BC is appropriate for communication equipment requiring non-blocking PCI Express connectivity among multiple subsystems. Its 10-port arrangement supports fan-out and peer-to-peer relationships, while the 12-lane upstream or fabric capacity provides a substantial path for consolidated traffic. In line-card or embedded networking designs, engineers should isolate clock and data paths carefully, maintain stringent differential impedance, and minimize high-density via transitions around the 324-pin FCBGA. The switch's 19 mm by 19 mm package also requires an early thermal strategy involving PCB copper, thermal vias, and enclosure airflow so sustained traffic does not raise junction temperature beyond the system target.
Recomendado
Graphics and Accelerator Networking
The PEX8713-CA80BC supports graphics and accelerator systems that need several high-speed endpoint connections coordinated through a PCIe switch. With 12 Gen 3 lanes, 10 ports, and 8.0 GT/s SerDes, it can structure fan-out or peer-to-peer traffic among display, compute, and storage-facing controllers. The architecture avoids treating every endpoint as an independent root-complex branch, enabling more deliberate traffic routing. Signal-integrity work should focus on insertion loss, reference-plane continuity, clock jitter margin, and connector launch geometry. Firmware scheduling and congestion behavior also matter when multiple accelerators generate simultaneous bursts, so system-level traffic tests should accompany electrical validation.
Recomendado
Endpoint Fan-Out
The PEX8713-CA80BC is well matched to endpoint fan-out architectures where one upstream PCI Express connection must serve multiple downstream devices. Ten ports provide more connection opportunities than a point-to-point interface, and the non-blocking switch design is intended to preserve concurrent traffic paths. This arrangement is useful for test systems, embedded controllers, and modular platforms that add endpoints according to system configuration. Layout engineers should follow the manufacturer package and reference-design guidance, control lane-to-lane skew, and provide local decoupling close to the FCBGA supply balls. Signal simulation should include realistic connector, via, and material-loss assumptions because fan-out topologies often create transitions that can reduce margin at 8.0 GT/s.
Recomendado
Peer-to-Peer PCIe Systems
The PEX8713-CA80BC supports peer-to-peer PCIe systems in which devices exchange traffic through a managed switching fabric rather than communicating only through a host. Its multi-host capability, 10-port topology, and 12-lane Gen 3 configuration provide flexibility for complex embedded topologies. The Broadcom product overview identifies peer-to-peer traffic as a supported use case. Engineering validation should include route tables, device ordering, arbitration behavior, and fault handling in addition to signal-integrity testing. A robust design also separates clocks from noisy switching nodes, provides clean power references, and confirms that every high-speed layer transition meets the manufacturer's impedance and length guidelines.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PEX8713-CA80BC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PEX8713-CA80BC-G | PEX8713-CA80BCG |
|---|---|---|---|
| Package | 324-FCBGA (19x19) | 324-FCBGA (19x19) | 324-FCBGA (19x19) |
| Brand | Broadcom | Broadcom | Broadcom |
| Device Type | PCI Express Gen 3 switch IC | PCI Express Gen 3 switch IC | PCI Express Gen 3 switch IC |
| Total Lanes | 12 lanes | 12 lanes | 12 lanes |
| Port Count | 10 ports | 10 ports | 10 ports |
| PCI Express Generation | Gen 3 | Gen 3 | Gen 3 |
| SerDes Data Rate | 8.0 GT/s per lane | 8.0 GT/s per lane | 8.0 GT/s per lane |
| Switch Architecture | Multi-host, non-blocking | Multi-host, non-blocking | Multi-host, non-blocking |
| Order-Code Format | PEX8713-CA80BC | Hyphenated suffix designation | Unhyphenated suffix designation |
Diferenciadores clave
- Matches the identified Broadcom PEX 8713 switching architecture (frente a PEX8713-CA80BC-G)
- Uses the same hardware configuration across order-code formatting (frente a PEX8713-CA80BCG)
- Provides multi-host non-blocking PCIe connectivity (frente a PEX8713-CA80BC-G)
Notas de diseño
Use the Broadcom reference layout as the starting point for the 324-pin FCBGA. Maintain continuous reference planes beneath every high-speed differential pair, match impedance to the selected PCB stack-up, minimize breakout vias, and avoid stubs or test pads on timing-sensitive nets. Validate insertion loss, reflection, crosstalk, and lane skew against the completed stack-up rather than relying only on schematic connectivity.
Design for the stated 8.0 GT/s SerDes rate on all 12 lanes. Account for package and connector transitions, clock-jitter budget, channel loss, and return-path discontinuities in pre-layout and post-layout simulation. Keep the reference clock distribution isolated from noisy switching nodes and follow the manufacturer's guidance for termination, configuration interfaces, and test-point access.
The 19 mm by 19 mm FCBGA requires early thermal planning. Use the manufacturer's package drawing to determine the required thermal land and via pattern, then calculate junction temperature using measured or datasheet-based power under sustained traffic. Validate the assembled board at maximum ambient temperature and worst-case neighboring heat sources before releasing the enclosure design.
Do not substitute a PCIe switch solely because it has a similar lane count. Confirm the exact ball map, supply rails, reference-clock interface, configuration method, reset behavior, firmware compatibility, and port-routing model. Confirm that the replacement uses the same 324-ball FCBGA footprint and verify all high-speed channels with the manufacturer's validation procedure.
Información de cumplimiento
The Broadcom product overview does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this PCI Express switch.