Broadcom

PEX8713-CA80BC - 12-Lane 10-Port PCIe Gen 3 Switch | Broadcom

料号: PEX8713-CA80BC ✓ 量产中
324-pin FCBGA Package
最小起订量: 1 |

PEX8713-CA80BC 概述

Broadcom PEX8713-CA80BC is a PCI Express Gen 3 switching IC with 12 lanes, 10 ports, integrated 8.0 GT/s SerDes, and a 324-pin FCBGA package measuring 19 mm by 19 mm. It provides multi-host PCI Express switching for scalable, high-bandwidth, non-blocking interconnection.

A PCI Express switch is a semiconductor in the interface-IC hierarchy that routes PCI Express traffic between a host or root complex and multiple endpoints. Positioned as a PCIe switch, interface controller, and power-management-independent connectivity component, the PEX 8713 supports fan-out, aggregation, and peer-to-peer traffic patterns used in servers, storage systems, communications equipment, and graphics platforms.

The device integrates 12 PCIe lanes and provides 10 ports for connecting multiple hosts with their respective endpoints. Its PCI Express Gen 3 SerDes operates at 8.0 GT/s per lane, enabling a high aggregate link bandwidth of 96.0 GT/s when all 12 lanes are active. This bandwidth calculation uses the stated 8.0 GT/s per-lane rate and 12-lane configuration.

The Broadcom product overview identifies the PEX 8713 as a multi-host switching solution designed for scalable, non-blocking interconnection. This architecture allows endpoint traffic to be distributed across multiple downstream links rather than relying on one shared point-to-point path. The resulting topology can improve routing flexibility and provide a practical foundation for systems with multiple processors, storage controllers, or accelerator endpoints.

Typical uses include server expansion, storage connectivity, communication platforms, graphics systems, and other PCIe aggregation designs. The 10-port configuration is particularly useful when a system must fan a limited set of upstream lanes across several endpoint devices while retaining scalable high-speed connectivity.

Board design requires careful high-speed signal-integrity work. Differential PCIe pairs need controlled impedance, continuous reference planes, minimized stub effects, and connector or package-transition discipline. Power delivery should be planned for the transceiver and digital sections across the documented operating conditions, while thermal analysis must account for the 19 mm by 19 mm FCBGA construction.

This page organizes the PEX 8713 architecture, package information, procurement options, and replacement guidance. It also identifies the limits of currently available equivalent-part data so engineers can distinguish true order-code matches from unrelated PCIe switch families.

直接替换替代料: PEX8713-CA80BC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

PEX8713-CA80BC-G

✅ 直接替换
📦 324-FCBGA (19x19)
Same 12 lanes, 10 ports, 8.0 GT/s SerDes, and 324-FCBGA package; order-code suffix differs by 0 electrical ratings.

📋 参考替代料(不在目录中)

PEX8713-CA80BCG

✅ 直接替换
📦 324-FCBGA (19x19)
Same 12 lanes, 10 ports, 8.0 GT/s SerDes, and 324-FCBGA package; hyphenated order-code format differs by 0 electrical ratings.

📋 参考替代料(不在目录中)

PEX8713-CA80BC 最大额定值与电气特性

Device Type PCI Express Gen 3 switch IC
PCI Express Generation Gen 3
Total Lanes 12 lanes
Port Count 10 ports
SerDes Data Rate 8.0 GT/s per lane
Aggregate Lane Data Rate 96.0 GT/s across 12 lanes
SerDes Integration Integrated 8.0 GT/s SerDes
Switch Architecture Multi-host, non-blocking PCIe switch
Supported Traffic Patterns Fan-out, aggregation, and peer-to-peer traffic
Package Type 324-pin FCBGA
Package Dimensions 19 mm x 19 mm
Manufacturer Broadcom
Primary Application Server, storage, communications, and graphics platforms

PEX8713-CA80BC 19 mm x 19 mm 引脚配置指南

PEX8713-CA80BC(19 mm x 19 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PEX8713-CA80BC 的 19 mm x 19 mm 封装引脚图

暂无详细引脚数据: PEX8713-CA80BC.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PEX8713-CA80BC 适用于 6 应用s: Multi-Host Server Expansion, Storage Controller Aggregation, PCIe Communication Equipment, Graphics and Accelerator Networking, Endpoint Fan-Out, Peer-to-Peer PCIe Systems.

🖥️

Multi-Host Server Expansion

The PEX8713-CA80BC fits server expansion designs that require a root complex or host to reach multiple downstream endpoints through a dedicated switching fabric. Its 12 lanes and 10 ports provide a broad connection matrix, while integrated 8.0 GT/s SerDes supports Gen 3 traffic without requiring a separate switch controller. The multi-host architecture can organize accelerator, storage, and communication endpoints behind a scalable, non-blocking path. Board planning should preserve continuous reference planes, control PCIe lane length skew, and allocate separate power distribution for analog, digital, and auxiliary supplies. Firmware and the configuration mechanism should also be validated alongside the physical layout before production release.

💾

Storage Controller Aggregation

The PEX8713-CA80BC can aggregate storage-controller traffic behind a multi-host PCIe switching layer. Ten ports allow several endpoint paths to be organized without forcing every device onto a single shared upstream link, while the 12-lane Gen 3 fabric provides 8.0 GT/s signaling per lane. This topology is useful when storage controllers, management processors, and host-facing paths must operate concurrently. Designers should use the manufacturer reference layout for high-speed routing, keep connector and package transitions controlled, and validate return paths beneath every differential pair. Queueing behavior, congestion tolerance, and firmware-based traffic management must be checked with the intended storage workload rather than inferred from port count alone.

🌐

PCIe Communication Equipment

The PEX8713-CA80BC is appropriate for communication equipment requiring non-blocking PCI Express connectivity among multiple subsystems. Its 10-port arrangement supports fan-out and peer-to-peer relationships, while the 12-lane upstream or fabric capacity provides a substantial path for consolidated traffic. In line-card or embedded networking designs, engineers should isolate clock and data paths carefully, maintain stringent differential impedance, and minimize high-density via transitions around the 324-pin FCBGA. The switch's 19 mm by 19 mm package also requires an early thermal strategy involving PCB copper, thermal vias, and enclosure airflow so sustained traffic does not raise junction temperature beyond the system target.

📺

Graphics and Accelerator Networking

The PEX8713-CA80BC supports graphics and accelerator systems that need several high-speed endpoint connections coordinated through a PCIe switch. With 12 Gen 3 lanes, 10 ports, and 8.0 GT/s SerDes, it can structure fan-out or peer-to-peer traffic among display, compute, and storage-facing controllers. The architecture avoids treating every endpoint as an independent root-complex branch, enabling more deliberate traffic routing. Signal-integrity work should focus on insertion loss, reference-plane continuity, clock jitter margin, and connector launch geometry. Firmware scheduling and congestion behavior also matter when multiple accelerators generate simultaneous bursts, so system-level traffic tests should accompany electrical validation.

🔧

Endpoint Fan-Out

The PEX8713-CA80BC is well matched to endpoint fan-out architectures where one upstream PCI Express connection must serve multiple downstream devices. Ten ports provide more connection opportunities than a point-to-point interface, and the non-blocking switch design is intended to preserve concurrent traffic paths. This arrangement is useful for test systems, embedded controllers, and modular platforms that add endpoints according to system configuration. Layout engineers should follow the manufacturer package and reference-design guidance, control lane-to-lane skew, and provide local decoupling close to the FCBGA supply balls. Signal simulation should include realistic connector, via, and material-loss assumptions because fan-out topologies often create transitions that can reduce margin at 8.0 GT/s.

🔗

Peer-to-Peer PCIe Systems

The PEX8713-CA80BC supports peer-to-peer PCIe systems in which devices exchange traffic through a managed switching fabric rather than communicating only through a host. Its multi-host capability, 10-port topology, and 12-lane Gen 3 configuration provide flexibility for complex embedded topologies. The Broadcom product overview identifies peer-to-peer traffic as a supported use case. Engineering validation should include route tables, device ordering, arbitration behavior, and fault handling in addition to signal-integrity testing. A robust design also separates clocks from noisy switching nodes, provides clean power references, and confirms that every high-speed layer transition meets the manufacturer's impedance and length guidelines.

推荐产品汇总

PEX8713-CA80BC-G Same Broadcom PEX 8713 switch configuration 用于: Multi-Host Server Expansion, Storage Controller Aggregation, PCIe Communication Equipment, Graphics and Accelerator Networking, Endpoint Fan-Out, Peer-to-Peer PCIe Systems PEX8713-CA80BCG Alternate Broadcom order-code format 用于: Multi-Host Server Expansion, Storage Controller Aggregation, PCIe Communication Equipment, Graphics and Accelerator Networking, Endpoint Fan-Out, Peer-to-Peer PCIe Systems
What is the Broadcom PEX8713-CA80BC?
The Broadcom PEX8713-CA80BC is a multi-host PCI Express Gen 3 switch IC with 12 lanes, 10 ports, and integrated 8.0 GT/s SerDes in a 324-pin FCBGA package. According to the Broadcom PEX 8713 product overview, it supports scalable, high-bandwidth, non-blocking interconnection for server, storage, communications, and graphics platforms.
How many PCI Express lanes and ports does the PEX8713-CA80BC have?
The PEX8713-CA80BC provides 12 PCI Express lanes and 10 ports. With 8.0 GT/s SerDes on each lane, the 12-lane configuration represents an aggregate signaling rate of 96.0 GT/s. According to the Broadcom PEX 8713 product overview, the device is intended for multi-host switching, fan-out, aggregation, and peer-to-peer traffic.
Where can I download the PEX8713-CA80BC datasheet PDF?
The official PEX 8713 product documentation is available through Broadcom at https://docs.broadcom.com/doc/12351844. Use the manufacturer document for the authoritative pin definitions, electrical characteristics, reference clock requirements, power sequencing, package drawings, layout guidance, and programming interface.
Where can I find the PEX8713-CA80BC pinout?
The PEX8713-CA80BC pinout is assigned across the 324-pin FCBGA package and must be taken from the Broadcom PEX 8713 datasheet and package drawing. Because a complete 324-ball assignment cannot be reproduced reliably without the manufacturer document, PCB engineers should assign each ball from the official pin-description table and land-pattern drawing.
What applications are suitable for the PEX8713-CA80BC?
The PEX8713-CA80BC is suitable for servers, storage systems, communications equipment, and graphics platforms that need multi-host PCIe connectivity. According to the Broadcom product overview, its 10-port switch supports fan-out, aggregation, and peer-to-peer traffic, making it useful where several endpoints must be interconnected through a scalable, non-blocking topology.
Is the PEX8713-CA80BC a drop-in replacement candidate?
The PEX8713-CA80BC is a drop-in replacement candidate only for an order code that uses the same Broadcom PEX 8713 die, 324-ball FCBGA footprint, and equivalent electrical configuration. The identified PEX 8713 order-code representations preserve the 12-lane, 10-port, 8.0 GT/s configuration, but package drawing, firmware, clocking, and pin-level equivalence still require engineering review.
What can replace the PEX8713-CA80BC?
The closest documented replacements are Broadcom order-code representations of the PEX 8713 that retain the same 324-pin FCBGA footprint and 12-lane, 10-port Gen 3 configuration. A true replacement must also match pinout, reference clock, power rails, firmware, configuration model, and system-specific validation requirements before it is approved for production.
What is the best Broadcom equivalent for the PEX8713-CA80BC?
The closest Broadcom equivalent is PEX8713-CA80BC-G, which preserves the PEX 8713 identity, 12 lanes, 10 ports, 8.0 GT/s SerDes, and 324-pin FCBGA format. According to the listed technical description, the rated architecture matches, but designers must still verify the exact ordering code, pinout, firmware, and PCB footprint.
Is PEX8713-CA80BC the same as PEX8713-CA80BCG?
PEX8713-CA80BC and PEX8713-CA80BCG identify the same PEX 8713 hardware configuration in different order-code formats, with 12 lanes, 10 ports, 8.0 GT/s SerDes, and a 324-pin FCBGA package. The suffix affects purchasing notation; confirm the manufacturer label, lot traceability, and assembly requirements before treating the markings as interchangeable.
When should I choose the PEX8713-CA80BC over another PCIe switch?
Choose the PEX8713-CA80BC when a design requires a Broadcom multi-host PCIe Gen 3 switch with 12 lanes, 10 ports, and an 8.0 GT/s SerDes. It is a strong fit for server, storage, communications, and graphics fan-out designs, but it is unsuitable when a different lane count, port topology, package, firmware model, or PCIe generation is required.
Is the PEX8713-CA80BC suitable for server and storage designs?
The PEX8713-CA80BC is suitable for server and storage connectivity when the topology matches its multi-host architecture. According to the Broadcom product overview, the 12-lane, 10-port device provides scalable, high-bandwidth, non-blocking interconnection and supports fan-out, aggregation, and peer-to-peer traffic across multiple endpoint devices.
What are the key specifications of the PEX8713-CA80BC that engineers should know?
The key specifications are 12 PCI Express lanes, 10 ports, PCI Express Gen 3 operation, integrated 8.0 GT/s SerDes, and a 324-pin FCBGA package measuring 19 mm by 19 mm. The Broadcom product overview also identifies multi-host, non-blocking switching with fan-out, aggregation, and peer-to-peer traffic support.
How do I design the PCB layout for the PEX8713-CA80BC?
Base the layout on the Broadcom reference design and package-specific guidance. Keep PCIe differential pairs impedance-controlled and length-matched, maintain continuous reference planes, minimize vias and stubs, isolate high-speed clocks from noisy power paths, and follow the manufacturer ball assignments exactly. Validate the final stack-up, connectors, decoupling, and power sequence with signal-integrity and power-integrity simulations.
What thermal design considerations apply to the PEX8713-CA80BC?
The PEX8713-CA80BC uses a 19 mm by 19 mm FCBGA package, so thermal performance depends on the PCB stack-up, exposed-pad or thermal-via implementation, airflow, and adjacent heat sources. Calculate worst-case junction rise from actual package power and board thermal resistance, then verify the design under maximum ambient temperature and sustained PCIe traffic.
Where can I buy the PEX8713-CA80BC and what is its lead time?
Use the Request a Quote form on this page to request the Broadcom PEX8713-CA80BC, current lead time, minimum order quantity, and factory packaging. The device is identified as a 324-pin FCBGA PCI Express Gen 3 switch, and a quote request allows procurement to confirm allocation, date code, and traceable supply.

工程参考数据: PEX8713-CA80BC ——对比、设计指导和合规信息。

选型指南

Choose the PEX8713-CA80BC when the system needs a Broadcom multi-host PCI Express Gen 3 switch with 12 lanes, 10 ports, and integrated 8.0 GT/s SerDes. It is particularly appropriate for server, storage, communications, graphics, fan-out, aggregation, and peer-to-peer designs that benefit from a non-blocking switching fabric. PEX8713-CA80BC-G is the closest documented alternative when procurement requires the hyphenated suffix format; its stated lane count, port count, SerDes rate, and package are unchanged. PEX8713-CA80BCG serves the same role when the manufacturer label uses the unhyphenated ordering format. None of these choices should be treated as interchangeable without checking the exact ball map, clocking, power rails, firmware, configuration interface, and PCB land pattern. A different PCIe switch with a different lane count, topology, package, or firmware model may require PCB redesign and therefore is not a drop-in selection.

与替代料对比

参数 本产品 PEX8713-CA80BC-G PEX8713-CA80BCG
Package 324-FCBGA (19x19) 324-FCBGA (19x19) 324-FCBGA (19x19)
Brand Broadcom Broadcom Broadcom
Device Type PCI Express Gen 3 switch IC PCI Express Gen 3 switch IC PCI Express Gen 3 switch IC
Total Lanes 12 lanes 12 lanes 12 lanes
Port Count 10 ports 10 ports 10 ports
PCI Express Generation Gen 3 Gen 3 Gen 3
SerDes Data Rate 8.0 GT/s per lane 8.0 GT/s per lane 8.0 GT/s per lane
Switch Architecture Multi-host, non-blocking Multi-host, non-blocking Multi-host, non-blocking
Order-Code Format PEX8713-CA80BC Hyphenated suffix designation Unhyphenated suffix designation

关键差异点

  • Matches the identified Broadcom PEX 8713 switching architecture (对比 PEX8713-CA80BC-G)
  • Uses the same hardware configuration across order-code formatting (对比 PEX8713-CA80BCG)
  • Provides multi-host non-blocking PCIe connectivity (对比 PEX8713-CA80BC-G)

设计说明

Use the Broadcom reference layout as the starting point for the 324-pin FCBGA. Maintain continuous reference planes beneath every high-speed differential pair, match impedance to the selected PCB stack-up, minimize breakout vias, and avoid stubs or test pads on timing-sensitive nets. Validate insertion loss, reflection, crosstalk, and lane skew against the completed stack-up rather than relying only on schematic connectivity.

Design for the stated 8.0 GT/s SerDes rate on all 12 lanes. Account for package and connector transitions, clock-jitter budget, channel loss, and return-path discontinuities in pre-layout and post-layout simulation. Keep the reference clock distribution isolated from noisy switching nodes and follow the manufacturer's guidance for termination, configuration interfaces, and test-point access.

The 19 mm by 19 mm FCBGA requires early thermal planning. Use the manufacturer's package drawing to determine the required thermal land and via pattern, then calculate junction temperature using measured or datasheet-based power under sustained traffic. Validate the assembled board at maximum ambient temperature and worst-case neighboring heat sources before releasing the enclosure design.

Do not substitute a PCIe switch solely because it has a similar lane count. Confirm the exact ball map, supply rails, reference-clock interface, configuration method, reset behavior, firmware compatibility, and port-routing model. Confirm that the replacement uses the same 324-ball FCBGA footprint and verify all high-speed channels with the manufacturer's validation procedure.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The Broadcom product overview does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this PCI Express switch.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

pex8713 csdn PEX8713-CA80BC datasheet PEX8713-CA80BC datasheet pdf PEX8713-CA80BC pinout PEX8713-CA80BC equivalent PEX8713-CA80BC replacement PEX8713-CA80BC cross reference PEX8713-CA80BC vs PEX8713-CA80BC-G PEX8713-CA80BC footprint Broadcom PEX8713-CA80BC PEX8713-CA80BC price PEX8713-CA80BC stock PEX8713 12 lane 10 port switch PEX8713 PCIe Gen 3 switch

相关元器件 & 术语

Broadcom PEX8713-CA80BC PEX8713-CA80BC-G PEX8713-CA80BCG PCI Express switch PCIe Gen 3 switch PCI interface IC multi-host switch non-blocking interconnect SerDes 8.0 GT/s 12-lane configuration 10-port topology fan-out aggregation peer-to-peer traffic 324-FCBGA FCBGA surface-mount package server expansion storage connectivity communications equipment graphics platform PCI Express semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情