PEX8713-CA80BC - 12-Lane 10-Port PCIe Gen 3 Switch | Broadcom
MPN: PEX8713-CA80BC ✓ 啟用中PEX8713-CA80BC 概覽
A PCI Express switch is a semiconductor in the interface-IC hierarchy that routes PCI Express traffic between a host or root complex and multiple endpoints. Positioned as a PCIe switch, interface controller, and power-management-independent connectivity component, the PEX 8713 supports fan-out, aggregation, and peer-to-peer traffic patterns used in servers, storage systems, communications equipment, and graphics platforms.
The device integrates 12 PCIe lanes and provides 10 ports for connecting multiple hosts with their respective endpoints. Its PCI Express Gen 3 SerDes operates at 8.0 GT/s per lane, enabling a high aggregate link bandwidth of 96.0 GT/s when all 12 lanes are active. This bandwidth calculation uses the stated 8.0 GT/s per-lane rate and 12-lane configuration.
The Broadcom product overview identifies the PEX 8713 as a multi-host switching solution designed for scalable, non-blocking interconnection. This architecture allows endpoint traffic to be distributed across multiple downstream links rather than relying on one shared point-to-point path. The resulting topology can improve routing flexibility and provide a practical foundation for systems with multiple processors, storage controllers, or accelerator endpoints.
Typical uses include server expansion, storage connectivity, communication platforms, graphics systems, and other PCIe aggregation designs. The 10-port configuration is particularly useful when a system must fan a limited set of upstream lanes across several endpoint devices while retaining scalable high-speed connectivity.
Board design requires careful high-speed signal-integrity work. Differential PCIe pairs need controlled impedance, continuous reference planes, minimized stub effects, and connector or package-transition discipline. Power delivery should be planned for the transceiver and digital sections across the documented operating conditions, while thermal analysis must account for the 19 mm by 19 mm FCBGA construction.
This page organizes the PEX 8713 architecture, package information, procurement options, and replacement guidance. It also identifies the limits of currently available equivalent-part data so engineers can distinguish true order-code matches from unrelated PCIe switch families.
直接替換替代品,適用於 PEX8713-CA80BC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PEX8713-CA80BC-G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8713-CA80BCG
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8713-CA80BC 最大額定值與電氣特性
| Device Type | PCI Express Gen 3 switch IC |
| PCI Express Generation | Gen 3 |
| Total Lanes | 12 lanes |
| Port Count | 10 ports |
| SerDes Data Rate | 8.0 GT/s per lane |
| Aggregate Lane Data Rate | 96.0 GT/s across 12 lanes |
| SerDes Integration | Integrated 8.0 GT/s SerDes |
| Switch Architecture | Multi-host, non-blocking PCIe switch |
| Supported Traffic Patterns | Fan-out, aggregation, and peer-to-peer traffic |
| Package Type | 324-pin FCBGA |
| Package Dimensions | 19 mm x 19 mm |
| Manufacturer | Broadcom |
| Primary Application | Server, storage, communications, and graphics platforms |
PEX8713-CA80BC 19 mm x 19 mm 腳位配置指南
PEX8713-CA80BC(19 mm x 19 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8713-CA80BC.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8713-CA80BC 適用於 6 應用s: Multi-Host Server Expansion, Storage Controller Aggregation, PCIe Communication Equipment, Graphics and Accelerator Networking, Endpoint Fan-Out, Peer-to-Peer PCIe Systems.
Multi-Host Server Expansion
The PEX8713-CA80BC fits server expansion designs that require a root complex or host to reach multiple downstream endpoints through a dedicated switching fabric. Its 12 lanes and 10 ports provide a broad connection matrix, while integrated 8.0 GT/s SerDes supports Gen 3 traffic without requiring a separate switch controller. The multi-host architecture can organize accelerator, storage, and communication endpoints behind a scalable, non-blocking path. Board planning should preserve continuous reference planes, control PCIe lane length skew, and allocate separate power distribution for analog, digital, and auxiliary supplies. Firmware and the configuration mechanism should also be validated alongside the physical layout before production release.
推薦
Storage Controller Aggregation
The PEX8713-CA80BC can aggregate storage-controller traffic behind a multi-host PCIe switching layer. Ten ports allow several endpoint paths to be organized without forcing every device onto a single shared upstream link, while the 12-lane Gen 3 fabric provides 8.0 GT/s signaling per lane. This topology is useful when storage controllers, management processors, and host-facing paths must operate concurrently. Designers should use the manufacturer reference layout for high-speed routing, keep connector and package transitions controlled, and validate return paths beneath every differential pair. Queueing behavior, congestion tolerance, and firmware-based traffic management must be checked with the intended storage workload rather than inferred from port count alone.
推薦
PCIe Communication Equipment
The PEX8713-CA80BC is appropriate for communication equipment requiring non-blocking PCI Express connectivity among multiple subsystems. Its 10-port arrangement supports fan-out and peer-to-peer relationships, while the 12-lane upstream or fabric capacity provides a substantial path for consolidated traffic. In line-card or embedded networking designs, engineers should isolate clock and data paths carefully, maintain stringent differential impedance, and minimize high-density via transitions around the 324-pin FCBGA. The switch's 19 mm by 19 mm package also requires an early thermal strategy involving PCB copper, thermal vias, and enclosure airflow so sustained traffic does not raise junction temperature beyond the system target.
推薦
Graphics and Accelerator Networking
The PEX8713-CA80BC supports graphics and accelerator systems that need several high-speed endpoint connections coordinated through a PCIe switch. With 12 Gen 3 lanes, 10 ports, and 8.0 GT/s SerDes, it can structure fan-out or peer-to-peer traffic among display, compute, and storage-facing controllers. The architecture avoids treating every endpoint as an independent root-complex branch, enabling more deliberate traffic routing. Signal-integrity work should focus on insertion loss, reference-plane continuity, clock jitter margin, and connector launch geometry. Firmware scheduling and congestion behavior also matter when multiple accelerators generate simultaneous bursts, so system-level traffic tests should accompany electrical validation.
推薦
Endpoint Fan-Out
The PEX8713-CA80BC is well matched to endpoint fan-out architectures where one upstream PCI Express connection must serve multiple downstream devices. Ten ports provide more connection opportunities than a point-to-point interface, and the non-blocking switch design is intended to preserve concurrent traffic paths. This arrangement is useful for test systems, embedded controllers, and modular platforms that add endpoints according to system configuration. Layout engineers should follow the manufacturer package and reference-design guidance, control lane-to-lane skew, and provide local decoupling close to the FCBGA supply balls. Signal simulation should include realistic connector, via, and material-loss assumptions because fan-out topologies often create transitions that can reduce margin at 8.0 GT/s.
推薦
Peer-to-Peer PCIe Systems
The PEX8713-CA80BC supports peer-to-peer PCIe systems in which devices exchange traffic through a managed switching fabric rather than communicating only through a host. Its multi-host capability, 10-port topology, and 12-lane Gen 3 configuration provide flexibility for complex embedded topologies. The Broadcom product overview identifies peer-to-peer traffic as a supported use case. Engineering validation should include route tables, device ordering, arbitration behavior, and fault handling in addition to signal-integrity testing. A robust design also separates clocks from noisy switching nodes, provides clean power references, and confirms that every high-speed layer transition meets the manufacturer's impedance and length guidelines.
推薦
推薦產品摘要
工程參考資料,適用於 PEX8713-CA80BC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PEX8713-CA80BC-G | PEX8713-CA80BCG |
|---|---|---|---|
| Package | 324-FCBGA (19x19) | 324-FCBGA (19x19) | 324-FCBGA (19x19) |
| Brand | Broadcom | Broadcom | Broadcom |
| Device Type | PCI Express Gen 3 switch IC | PCI Express Gen 3 switch IC | PCI Express Gen 3 switch IC |
| Total Lanes | 12 lanes | 12 lanes | 12 lanes |
| Port Count | 10 ports | 10 ports | 10 ports |
| PCI Express Generation | Gen 3 | Gen 3 | Gen 3 |
| SerDes Data Rate | 8.0 GT/s per lane | 8.0 GT/s per lane | 8.0 GT/s per lane |
| Switch Architecture | Multi-host, non-blocking | Multi-host, non-blocking | Multi-host, non-blocking |
| Order-Code Format | PEX8713-CA80BC | Hyphenated suffix designation | Unhyphenated suffix designation |
主要差異化特點
- Matches the identified Broadcom PEX 8713 switching architecture (對比PEX8713-CA80BC-G)
- Uses the same hardware configuration across order-code formatting (對比PEX8713-CA80BCG)
- Provides multi-host non-blocking PCIe connectivity (對比PEX8713-CA80BC-G)
設計說明
Use the Broadcom reference layout as the starting point for the 324-pin FCBGA. Maintain continuous reference planes beneath every high-speed differential pair, match impedance to the selected PCB stack-up, minimize breakout vias, and avoid stubs or test pads on timing-sensitive nets. Validate insertion loss, reflection, crosstalk, and lane skew against the completed stack-up rather than relying only on schematic connectivity.
Design for the stated 8.0 GT/s SerDes rate on all 12 lanes. Account for package and connector transitions, clock-jitter budget, channel loss, and return-path discontinuities in pre-layout and post-layout simulation. Keep the reference clock distribution isolated from noisy switching nodes and follow the manufacturer's guidance for termination, configuration interfaces, and test-point access.
The 19 mm by 19 mm FCBGA requires early thermal planning. Use the manufacturer's package drawing to determine the required thermal land and via pattern, then calculate junction temperature using measured or datasheet-based power under sustained traffic. Validate the assembled board at maximum ambient temperature and worst-case neighboring heat sources before releasing the enclosure design.
Do not substitute a PCIe switch solely because it has a similar lane count. Confirm the exact ball map, supply rails, reference-clock interface, configuration method, reset behavior, firmware compatibility, and port-routing model. Confirm that the replacement uses the same 324-ball FCBGA footprint and verify all high-speed channels with the manufacturer's validation procedure.
合規資訊
The Broadcom product overview does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this PCI Express switch.