Microchip Technology

PIC16F1824-E/P - 8-Bit 32MHz Flash MCU | Microchip

N.º de pieza: PIC16F1824-E/P ✓ Activo
14-pin PDIP, 0.300 inch body width, 7.62 mm pitch Package 32 MHz Speed 7 KB Memory
MOQ: 1 |

PIC16F1824-E/P Descripción general

The Microchip Technology PIC16F1824-E/P is an 8-bit PIC microcontroller with 7 KB of Flash program memory, a 4K x 14 word architecture, and a maximum clock speed of 32 MHz. It is supplied in a 14-pin PDIP package for through-hole PCB assembly. The E suffix identifies the extended-temperature grade, while the /P suffix identifies the PDIP package option.

A microcontroller is a programmable system-on-chip that integrates a processor core, Flash memory, RAM, oscillators, analog conversion, digital I/O, and communication peripherals on one device. The PIC16F1824 belongs to the enhanced mid-range PIC16 family, combining a RISC-based architecture with integrated capacitive-touch sensing and nanoWatt XLP low-power features. This hierarchy places it within 8-bit microcontrollers, embedded controllers, and programmable logic devices.

Program storage is organized as 4K x 14 words within a 7 KB Flash device, allowing the firmware to be programmed and rewritten through the Microchip development toolchain. Integrated debug support removes the need for a dedicated debug header, while programming and debug support is available through PICkit 3 and MPLAB ICD 3. The manufacturer lists the base PIC16F1824 family as in production.

The device is suited to compact embedded control systems that require deterministic 8-bit processing, low-power operation, and a straightforward through-hole footprint. Typical uses include industrial control panels, sensing nodes, instrumentation, small motor-control boards, and low-cost consumer appliances. Capacitive-touch mTouch capability supports touch-sensitive keypads and control surfaces without separate discrete touch controllers.

For new PCB layouts, confirm each signal connection against the manufacturer pin-description table before routing. Decouple VDD near the device with a local 0.1 µF ceramic capacitor, and add bulk supply capacitance at the board's power-distribution point. The 14-pin PDIP footprint is mechanically convenient for prototypes and through-hole production but occupies more board area than the corresponding surface-mount options.

This page combines manufacturer lifecycle information, package and memory details, programming guidance, replacement options, and practical PCB considerations. It also organizes alternative MPNs by package and temperature grade so engineers can identify the closest upgrade path before releasing a new PCB.

Alternativas directas para PIC16F1824-E/P — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con PIC16F1824-E/P (mismo factor de forma y huella) — difiere en Package, ADC, Internal Oscillator, Low-Power Technology, Architecture.

Microchip Technology
Package: 14-pin PDIP (0.300"/7.62 mm pitch)
ADC: 12-bit with computation, up to 11 channels
Internal Oscillator: Yes, 32 MHz with ±1% calibration (typical)
Microchip Technology
Package: 14-pin PDIP
Internal Oscillator: 32 MHz
Architecture: Enhanced mid-range PIC RISC
Microchip Technology
Package: 14-pin PDIP (0.300 inch, 7.62 mm)
ADC: 10-bit, up to 8 channels
Internal Oscillator: 32 MHz HFINTOSC +/-1%
Microchip Technology
Package: 14-pin PDIP (P)
ADC: 10-bit, up to 12 channels
Architecture: PIC16 Enhanced Mid-Range 8-bit RISC
Microchip Technology
Package: 18-pin PDIP (Through-Hole)
ADC: 12-channel, 10-bit
Internal Oscillator: 32 MHz with PLL

PIC16F1824-I/P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 14-pin PDIP
PIC 8-bit enhanced mid-range · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 32 MHz · 2.3 V to 5.5 V · 12 · 10-bit, up to 8 channels

Consulte el precio

Ver hoja de datos →

PIC16F1823-I/P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 14-pin PDIP
8-bit flash microcontroller · PIC XLP · Enhanced mid-range PIC RISC · 32 MHz · 200 ns · 3.5 KB · 2K × 14 words · 128 bytes

Consulte el precio

Ver hoja de datos →

PIC16F1825-I/P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 14-pin PDIP
PIC16 Enhanced Mid-Range 8-bit RISC · 32 MHz (4x PLL from 8 MHz internal) · 200 ns · 14KB (8K x 14 words) · 1 KB · 256 bytes · 2.5 V to 5.5 V · 12

Consulte el precio

Ver hoja de datos →

PIC16F1827-I/P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 14-pin PDIP
Enhanced Mid-Range PIC16 8-bit · 49 instructions, 16 stack levels · 32 MHz · 200 ns at 20 MHz (125 ns at 32 MHz) · 7 KB (4K x 14 words) · 384 bytes · 256 bytes · 1.8 V to 5.5 V

Consulte el precio

Ver hoja de datos →

PIC16F1822-I/P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 14-pin PDIP
Same PIC16 family and 14-pin PDIP format, but lower program-memory capacity and fewer peripheral resources than the 7 KB PIC16F1824-E/P.

📋 Alternativa de referencia (no en el catálogo)

PIC16F1824-E/P Valores máximos y características eléctricas

Manufacturer Microchip Technology
Product Type 8-bit Flash Microcontroller
Architecture Enhanced mid-range PIC16 with RISC-based core
Maximum CPU Frequency 32 MHz
Flash Memory 7 KB
Program Memory Organization 4K x 14 words
Encapsulado 14-pin PDIP, 0.300 inch body width, 7.62 mm pitch
Tipo de montaje Through-hole
Temperature Grade Extended (-40°C to +125°C)
Program Memory Type Flash
Capacitive Touch mTouch capacitive-touch sensing supported
Low-Power Technology nanoWatt XLP
Integrated Debug Support Yes, on-device debug support
Debug Header Required No
Programming Support PICkit 3 and MPLAB ICD 3
Estado del ciclo de vida In Production
Estado RoHS Compliant

Configuración de pines de PIC16F1824-E/P

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 RA5 — General-purpose I/O pin RA5
Pin 2 RA4 — General-purpose I/O pin RA4
Pin 3 RA3 — General-purpose I/O pin RA3
Pin 4 RA2 — General-purpose I/O pin RA2
Pin 5 RA1 — General-purpose I/O pin RA1
Pin 6 RA0 — General-purpose I/O pin RA0
Pin 7 VSS — Ground reference connection
Pin 8 RB0 — General-purpose I/O pin RB0
Pin 9 RB1 — General-purpose I/O pin RB1
Pin 10 RB2 — General-purpose I/O pin RB2
Pin 11 RB3 — General-purpose I/O pin RB3
Pin 12 VDD — Positive supply-voltage connection
Pin 13 RC5 — General-purpose I/O pin RC5
Pin 14 RC4 — General-purpose I/O pin RC4

Aplicaciones típicas

PIC16F1824-E/P es adecuado para 6 aplicacións: Industrial Control Panel, Capacitive-Touch Keypad, Battery-Powered Sensing Node, Programmable Logic Controller, Instrumentation and Data Acquisition, Small Motor and Relay Control.

🏭

Industrial Control Panel

The PIC16F1824-E/P is suitable for compact industrial control panels because its 32 MHz 8-bit core executes control logic quickly, while 7 KB of Flash provides room for state machines, menu handling, and input validation. The 14-pin PDIP package simplifies through-hole assembly and serviceable prototypes. Use the mTouch inputs for front-panel buttons and configure debouncing in firmware to prevent switch-bounce events. Add local 0.1 µF decoupling at VDD and a bulk capacitor near the supply entry point to control transient noise. The extended-temperature grade supports designs requiring a wider operating range than the industrial option, while the integrated debug support permits programming through PICkit 3 without a dedicated header.

🧩

Capacitive-Touch Keypad

The mTouch capacitive-touch capability of the PIC16F1824-E/P allows a keypad, door-control panel, or appliance interface to detect touch electrodes without a separate touch-controller IC. Its 32 MHz clock provides adequate response time for debouncing, gesture interpretation, and illumination updates, while the 4K x 14-word Flash organization stores the sensing and UI firmware. Keep touch-electrode traces short, guard them with a grounded pour, and keep high-current switching paths away from the sensing inputs to reduce coupling. Verify the required touch pins and shared functions against the manufacturer pin-description table because multiplexed port functions can affect sensor assignment.

🧩

Battery-Powered Sensing Node

The PIC16F1824-E/P can serve as the controller in a battery-powered environmental or condition-monitoring node because the PIC16F1824 family includes nanoWatt XLP low-power technology. The 8-bit architecture avoids the overhead of a higher-power processor when the design only samples sensors, applies thresholds, and transmits occasional results. Operating current varies with the selected clock, active peripherals, and duty cycle, so calculate the average consumption from the specific power modes used by the firmware. Place the MCU close to its decoupling capacitor, keep unused I/O in defined states, and isolate the radio or communications section from sensitive analog measurement paths.

🏭

Programmable Logic Controller

The PIC16F1824-E/P can implement compact PLC-like control for pumps, valves, relays, and small machines where deterministic I/O handling matters more than high processing throughput. Its 32 MHz maximum clock and Flash program memory support combination logic, timers, counters, and communication routines in a single 14-pin controller. Use the manufacturer I/O mapping to assign outputs and verify current limits for each port before connecting loads. Because the PDIP package exposes only a limited number of I/O pins, use an expander or driver circuit when the design needs more inputs or outputs than the package provides, and keep inductive loads physically separated from sensitive logic traces.

📺

Instrumentation and Data Acquisition

The PIC16F1824-E/P is appropriate for front-end instrumentation that gathers digital measurements, performs scaling, drives a local display, and sends results to a host. The 32 MHz clock supports responsive sampling and filtering, while integrated debug makes firmware bring-up straightforward. Confirm the device's ADC and timer resources in the manufacturer datasheet before assigning a specific measurement channel, since the supplied catalog data does not state the converter resolution. Place analog and digital return paths appropriately, provide a local bypass capacitor at VDD, and use short traces for measurement inputs to minimize pickup. A serial transceiver can extend the design when remote communication is required.

🔧

Small Motor and Relay Control

The PIC16F1824-E/P can control relays, solenoids, stepper indexing, or small motors in compact automation modules. The 8-bit core is sufficient for sequencing, limit-switch debouncing, and timing functions, while Flash allows field-updatable control logic. Keep the MCU and its decoupling away from relay contacts and motor wiring to reduce electromagnetic coupling, and use transistor or MOSFET driver circuits rather than driving inductive loads directly from a port pin. Add flyback protection across the load and separate high-current return paths from the device ground reference. Verify whether the required motor-control peripherals and timer resources are available in the selected family variant before finalizing the firmware.

What is the PIC16F1824-E/P?
The PIC16F1824-E/P is a Microchip Technology 8-bit Flash microcontroller with a 32 MHz maximum operating frequency, 7 KB of Flash program memory, and a 4K x 14 word program organization. It is the extended-temperature, 14-pin PDIP version of the PIC16F1824 family. The manufacturer lists the PIC16F1824 family as in production, and the device supports programming through PICkit 3 and MPLAB ICD 3.
Where can I download the PIC16F1824-E/P datasheet PDF?
The manufacturer datasheet is available directly from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/41419A.pdf. It covers the PIC16F1824 family rather than only the /P ordering code and is the appropriate document for the 14-pin PDIP pinout, electrical characteristics, memory map, and peripheral descriptions. Use the manufacturer's pin-description table when assigning PCB nets.
What is the pinout of the PIC16F1824-E/P?
The PIC16F1824-E/P uses a 14-pin PDIP arrangement with RA5, RA4, RA3, RA2, RA1, RA0, VSS, RB0, RB1, RB2, RB3, VDD, RC5, and RC4 arranged counterclockwise from pin 1. Verify the assignments against the 41419A manufacturer datasheet before final routing, particularly the multifunction roles of the port pins and the VDD-to-VSS supply connection.
What are the key specifications of PIC16F1824-E/P that engineers should know?
The PIC16F1824-E/P combines an 8-bit processor, 32 MHz maximum clock, 7 KB of Flash memory organized as 4K x 14 words, and a 14-pin PDIP footprint in one device. It also provides nanoWatt XLP low-power features, mTouch capacitive-touch capability, and integrated debug support. These characteristics make it suitable for compact control, sensing, and instrumentation products built with through-hole assembly.
How much Flash memory does the PIC16F1824-E/P have?
The PIC16F1824-E/P contains 7 KB of Flash program memory organized as 4K x 14 words. Because each program word is 14 bits wide, the stated 4K x 14 organization describes the instruction-word address space rather than 4 KB of 8-bit byte storage. The manufacturer datasheet should be consulted for the corresponding data-memory map and configuration-word layout.
Is PIC16F1824-E/P suitable for low-power designs?
Yes, the PIC16F1824-E/P incorporates nanoWalt XLP low-power technology and can serve battery-operated sensing and control products when the firmware uses the available sleep and peripheral-control features. Actual current depends on the operating mode, active peripherals, clock configuration, and I/O loading, so select the power mode from the manufacturer datasheet rather than relying on a single catalog current value.
Can PIC16F1824-E/P be programmed with PICkit 3?
Yes, Microchip lists programming and debug support for the PIC16F1824 through PICkit 3 and MPLAB ICD 3. Because the device includes integrated debug support, a dedicated debug header is not required, although a programmer interface still needs the appropriate signals and connections. Follow the MPLAB programming and development tool guidance for wiring and configuration.
What is the difference between PIC16F1824-E/P and PIC16F1824-I/P?
The principal ordering-code difference is the temperature grade: PIC16F1824-E/P uses the extended-temperature grade, while PIC16F1824-I/P is the industrial grade. Both use the 14-pin PDIP package and belong to the same PIC16F1824 family, so the physical footprint and device-level functions remain compatible. Select the grade by matching the required ambient-temperature range to the product's environmental requirements.
Can PIC16F1824-I/P replace PIC16F1824-E/P?
PIC16F1824-I/P is a close physical alternative because it retains the 14-pin PDIP package and the same PIC16F1824 family architecture, but it is a different temperature grade. It is appropriate where the industrial grade covers the required ambient range. It should not be substituted without confirming the temperature specification, supply conditions, and any programmed configuration requirements.
When should I choose PIC16F1824-E/P instead of a surface-mount option?
Choose the 14-pin PDIP PIC16F1824-E/P when through-hole assembly, hand rework, breadboard prototyping, or a leaded mechanical footprint is more valuable than minimum board area. The same PIC16F1824 family is also offered in surface-mount packages for compact production boards. A package change alters land patterns, assembly processes, thermal behavior, and availability, so treat it as a PCB-level decision rather than a simple part substitution.
What is the best drop-in replacement for PIC16F1824-E/P?
The closest drop-in choices are the same-family 14-pin PDIP devices such as PIC16F1824-I/P, PIC16F1823-I/P, and PIC16F1825-I/P. A replacement must be checked for Flash capacity, RAM, peripheral differences, temperature grade, and pin multiplexing; a matching package alone does not guarantee that existing firmware will behave identically. For a temperature-range change only, PIC16F1824-I/P is generally the least disruptive option.
What is the best Microchip alternative to PIC16F1824-E/P?
PIC16F1824-I/P is the most conservative Microchip alternative because it retains the same 14-pin PDIP footprint and PIC16F1824 device family while changing the temperature-grade designation. PIC16F1823-I/P and PIC16F1825-I/P provide additional family options, but their program-memory capacity and peripheral sets differ. Validate the new part against the complete electrical and firmware requirements before substitution.
Where can I buy PIC16F1824-E/P online?
Use the Request a Quote form on this page to request current availability, quantity breaks, and delivery for PIC16F1824-E/P. MicrochipDirect lists the factory-programmable device in stock, while distributor listings also carry the standard 14-pin PDIP part. Request a written quotation for the exact suffix, programmed configuration, and shipping quantity needed for production.
What is the price of PIC16F1824-E/P?
Current commercial pricing for PIC16F1824-E/P is best obtained through the Request a Quote form on this page because distributor inventory, programming options, and order quantities affect the final price. The manufacturer factory-programmable listing and distributor records confirm market availability without requiring a static price to be published on this page. Submit the requested quantity and programming details for a current quotation.
What is the lead time for PIC16F1824-E/P?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer listing reports an estimated shipment of 27-Oct-2026 for a stated in-stock quantity, but that estimate does not establish the lead time for larger orders, programmed configurations, or future inventory. The date is included only as the manufacturer's current listing estimate.
Is PIC16F1824-E/P in stock?
PIC16F1824-E/P is available from MicrochipDirect and multiple distributors, and the manufacturer listing reports 5,430 factory-programmable units in stock. Availability can change with order volume and programming requirements, so use the Request a Quote form on this page to confirm the current quantity for the exact ordering code and configuration.

Datos de referencia de ingeniería para PIC16F1824-E/P — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose PIC16F1824-E/P when the design needs a 14-pin through-hole footprint, 32 MHz 8-bit performance, 7 KB of Flash, mTouch sensing, and an extended-temperature grade. PIC16F1824-I/P is the most direct upgrade path when the industrial temperature range is sufficient because it retains the same family and package. PIC16F1823-I/P or PIC16F1822-I/P may fit when less program memory is needed, but the smaller Flash capacity and peripheral differences require a firmware and pin-function review. PIC16F1825-I/P and PIC16F1827-I/P can suit designs needing a different balance of memory or peripherals, provided their device-specific resources are verified. All listed alternatives use the same 14-pin PDIP footprint, so no PCB land-pattern change is expected, but package compatibility does not by itself guarantee firmware compatibility. For new compact production designs, also evaluate the surface-mount options in the PIC16F1824 family when board area, assembly cost, and mechanical height are more important than through-hole serviceability.

Comparación con alternativas

Parámetro Este producto PIC16F1824-I/P PIC16F1823-I/P PIC16F1825-I/P PIC16F1827-I/P PIC16F1822-I/P
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Temperature Grade Extended Industrial Industrial Industrial Industrial Industrial
Processor Architecture 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16
Integrated Debug Support Yes Yes Yes Yes Yes Yes
Capacitive Touch mTouch supported mTouch supported Family-dependent Family-dependent Family-dependent Family-dependent
Programming Support PICkit 3 and MPLAB ICD 3 PICkit 3 and MPLAB ICD 3 MPLAB-compatible programmer MPLAB-compatible programmer MPLAB-compatible programmer MPLAB-compatible programmer

Diferenciadores clave

  • Extended-temperature ordering option (frente a PIC16F1824-I/P)
  • 7 KB Flash in a through-hole controller (frente a PIC16F1822-I/P)
  • mTouch integration without a separate controller (frente a PIC16F1822-I/P)
  • Integrated debugging simplifies development (frente a PIC16F1823-I/P)

Notas de diseño

Place the device close to the board's regulated supply and place a 0.1 µF ceramic bypass capacitor directly across VDD and VSS. Add a separate bulk capacitor near the supply entry point to handle longer traces and higher switching currents. Keep the capacitor return short and connect it to the device ground reference rather than routing it through a noisy load-current path.

Route mTouch electrode traces as short, guarded signals and keep them away from relays, motor windings, mains-adjacent wiring, and high-edge-rate clock signals. A grounded guard surrounding each electrode reduces capacitive pickup from adjacent copper. Validate the selected touch channel assignment against the 41419A manufacturer pin-description table because port multiplexing may restrict electrode placement.

Do not assume that a 14-pin PDIP ordering code guarantees identical firmware across every PIC16F182x variant. Program-memory size, RAM, timers, serial interfaces, analog channels, and pin multiplexing can differ between the 1822, 1823, 1824, 1825, and 1827 devices. Review the device-specific pin and peripheral tables, rebuild with the replacement header, and test all interrupt and timer assumptions before production release.

For battery-powered designs, calculate average consumption from the firmware's active current, sleep current, wake-up interval, and the duty cycle of the radio or sensor interface. Use the peripheral shutdown bits and clock-gating options provided by the device where the application allows them. Avoid leaving unused port outputs actively driving external nodes, since input and output leakage can dominate the standby budget in a low-current design.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer lists RoHS-compliant PIC16F1824-family devices. AEC-Q100 automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals declarations are not established for this exact ordering code.

Búsquedas relacionadas

pic16f1824 datasheet pic16f1824 pinout pic16f1824 datasheet pdf pic16f1824 pdf microchip pic16f1824 PIC16F1824-E/P datasheet PIC16F1824-E/P pinout PIC16F1824-E/P 14-pin PDIP PIC16F1824-E/P replacement PIC16F1824-E/P equivalent PIC16F1824-E/P drop-in alternative PIC16F1824 32MHz microcontroller PIC16F1824 capacitive touch application PIC16F1824-E/P price PIC16F1824-E/P stock

Componentes & términos relacionados

Microchip Technology PIC16F1824 PIC16F1824-E/P PIC16F1824-I/P PIC16F1823-I/P PIC16F1825-I/P PIC16F1827-I/P PIC16F1822-I/P 8-bit microcontroller enhanced mid-range PIC16 RISC-based architecture Flash program memory nanoWatt XLP mTouch capacitive-touch sensing PICkit 3 MPLAB ICD 3 integrated debug support 14-pin PDIP through-hole package 32 MHz 4K x 14 word program memory industrial control battery-powered sensing node RoHS
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ