Microchip Technology

PIC24FJ32GA102-I/SP - 32MHz 16-Bit MCU | Microchip

N.º de pieza: PIC24FJ32GA102-I/SP ✓ Activo
2 V to 3.6 V Vdss 28-pin SPDIP Package 32 MHz Speed 32 KB (11K × 24 words) Memory
MOQ: 1 |

PIC24FJ32GA102-I/SP Descripción general

The Microchip Technology PIC24FJ32GA102-I/SP is a 16-bit PIC24 XLP low-power microcontroller operating at up to 32 MHz, with 32 KB of Flash program memory, 8 KB of RAM, and 21 I/O pins in a 28-pin SPDIP package. It combines a 16 MIPS instruction throughput with integrated I2C, SPI, UART/USART, IrDA, PWM, watchdog-timer, and brown-out-detection functions.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The PIC24 belongs to the 16-bit RISC microcontroller family and is designed for embedded control, where firmware and integrated peripherals replace many discrete logic components. Low-power XLP operating modes are especially useful in battery-powered instruments, portable monitors, and connected sensor nodes.

The 32 KB Flash memory provides 11K × 24 program words, while 8 KB of RAM supports working state, buffers, and communication frames. Twenty-one I/O pins allow the device to connect sensors, displays, switches, actuators, and serial peripherals. The integrated serial interfaces support I2C, SPI, UART/USART, and IrDA, reducing both PCB area and firmware overhead.

The -I/SP ordering identifies the industrial-temperature, 28-pin SPDIP configuration. The -I temperature designation supports operation across an extended industrial temperature range, while the /SP package suffix identifies the through-hole package. A 2.5 V or 3.3 V operating design point is typical, with the listed supply range extending from 2 V to 3.6 V.

Typical uses include blood-pressure monitors, industrial sensor interfaces, compact control panels, portable medical instruments, and low-power embedded nodes. The 32 MHz core provides deterministic control headroom, while PWM and watchdog functions support motor, lighting, and safety-monitored control loops. The 28-pin package also supports through-hole assembly and prototype workflows.

For a new PCB, reserve decoupling close to each supply pin, route ICSP programming and debugging access to the assigned pins, and confirm oscillator, reset, and I/O assignments against the manufacturer pin-description table. Use a 3.3 V-compatible programmer and specify the exact suffix in the production bill of materials.

This page combines manufacturer product information, memory specifications, connectivity details, application guidance, and replacement-analysis constraints to support component selection, schematic review, sourcing, and firmware bring-up for the PIC24FJ32GA102-I/SP.

Alternativas directas para PIC24FJ32GA102-I/SP — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con PIC24FJ32GA102-I/SP (mismo factor de forma y huella) — difiere en Mounting Type, Package.

Microchip Technology
Mounting Type: Surface Mount
Package: 28-pin SOIC (SO), 300-mil body

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

PIC24FJ32GA102-I/SP Valores máximos y características eléctricas

Product Type 16-bit RISC flash microcontroller
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Flash Program Memory 32 KB (11K × 24 words)
RAM Memory 8 KB
I/O Pin Count 21 pins
Supply Voltage Range 2 V to 3.6 V
Nominal Operating Voltages 2.5 V or 3.3 V
Encapsulado 28-pin SPDIP
Tipo de montaje Through-hole
Temperature Grade Industrial grade (-I)
Serial Interfaces I2C, SPI, UART/USART, and IrDA
Timer and Control Peripherals PWM and watchdog timer
Voltage Monitoring Brown-out detection
Programming Interface In-Circuit Serial Programming (ICSP)
Debugging Interface ICSP debugging with PGEC/PGED pins
Low-Power Technology nanoWatt XLP technology

Guía de configuración de pines de PIC24FJ32GA102-I/SP 28-pin spdip

Configuración de pines para PIC24FJ32GA102-I/SP (encapsulado 28-pin spdip). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 28-pin spdip para PIC24FJ32GA102-I/SP

No hay datos detallados de patillaje disponibles para PIC24FJ32GA102-I/SP.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PIC24FJ32GA102-I/SP es adecuado para 6 aplicacións: Blood-Pressure Monitor Control, Industrial Sensor Interface, Portable Medical Instrument, Low-Power Environmental Monitor, Compact Motor Control, Programmable Control Panel.

💊

Blood-Pressure Monitor Control

The PIC24FJ32GA102-I/SP fits a compact blood-pressure monitor because its 32 MHz processor provides 16 MIPS of instruction throughput for pump timing, user-interface control, and measurement sequencing. Its 8 KB RAM can hold working samples and interface state, while the 21 I/O pins support switches, displays, and sensor signaling. Integrated I2C, SPI, UART/USART, and IrDA interfaces reduce the need for separate interface devices. The 28-pin SPDIP package also simplifies prototype construction. Firmware should use the watchdog timer for pump and measurement-loop recovery, and the design must validate brown-out behavior during motor and actuator transitions.

🏭

Industrial Sensor Interface

The PIC24FJ32GA102-I/SP is appropriate for an industrial sensor interface requiring local acquisition, configuration, and communication. The 16-bit RISC core operating at 32 MHz can service multiple protocols and control tasks, while 32 KB of Flash preserves room for application firmware and calibration logic. Twenty-one I/O pins provide discrete digital sensor channels, indicators, and actuator controls. I2C and SPI support common sensors and memory devices, and UART/USART or IrDA can connect the node to a higher-level controller. Brown-out detection helps protect the node during industrial supply disturbances, while the industrial -I grade supports extended-temperature operation.

💊

Portable Medical Instrument

The PIC24FJ32GA102-I/SP can serve as the control core in a portable medical instrument where compactness, low-power operation, and deterministic control are important. Its 32 MHz performance supports acquisition scheduling, signal conditioning coordination, display updates, and button handling without an external processor. The 8 KB RAM accommodates short-term measurement buffers, while 32 KB Flash holds firmware and constants. XLP power modes help reduce energy use between measurements, and the integrated brown-out detector can support safe recovery from supply disturbances. A medical design must still apply the appropriate risk controls, validation, and external protection required for its intended use.

🧩

Low-Power Environmental Monitor

The PIC24FJ32GA102-I/SP suits an environmental monitor that combines periodic sensing with low standby consumption. Its 32 MHz core provides enough performance to sample, filter, timestamp, and format data locally, while XLP operating modes can reduce energy use between measurement intervals. The 21 I/O pins can support digital probes, indicators, and power-control signals, and the integrated serial interfaces permit connection to radio or storage modules. Eight kilobytes of RAM is suitable for modest sample buffers and protocol state. Brown-out detection helps identify unstable supply conditions, while the 28-pin SPDIP package simplifies through-hole prototypes and laboratory rework.

⚡

Compact Motor Control

The PIC24FJ32GA102-I/SP can coordinate a small motor or actuator in a compact embedded controller. The 32 MHz, 16-bit processing core provides faster control-loop execution than needed for many basic PWM duties, leaving capacity for position sensing, fault detection, and communications. Integrated PWM and watchdog-timer functions support deterministic actuator drive and recovery, while 21 I/O pins provide sensor inputs and control outputs. The device's 2 V to 3.6 V range permits integration with low-voltage power systems. Designers should size transistor drive paths, provide flyback protection, and verify startup and stall behavior across the full motor-supply range.

📺

Programmable Control Panel

The PIC24FJ32GA102-I/SP works well in a programmable control panel because 21 I/O pins can operate displays, indicators, switches, relays, and status LEDs. Its 32 KB Flash provides space for menu logic, configuration data, and firmware, while 8 KB RAM supports display and event-handling tasks. I2C and SPI can connect digital displays or memory, and UART/USART enables a host or service interface. At 32 MHz, the MCU can manage user input and periodic diagnostics concurrently. The 28-pin SPDIP package is useful for through-hole prototypes, although a production redesign may favor a smaller surface-mount package after the prototype is validated.

What is the Microchip PIC24FJ32GA102-I/SP?
The Microchip Technology PIC24FJ32GA102-I/SP is a 16-bit RISC flash microcontroller rated for 32 MHz operation, with 32 KB of program Flash, 8 KB of RAM, and 21 I/O pins. According to the Microchip product page, it belongs to the PIC24 XLP family and is packaged in a 28-pin SPDIP for through-hole assembly.
What are the key specifications of PIC24FJ32GA102-I/SP that engineers should know?
The PIC24FJ32GA102-I/SP combines a 32 MHz 16-bit core, 16 MIPS instruction throughput, 32 KB Flash, 8 KB RAM, and 21 I/O pins in a 28-pin SPDIP. The manufacturer product page identifies advanced peripherals, while the family datasheet describes a 2 V to 3.6 V supply range and I2C, SPI, UART/USART, and IrDA connectivity.
Where can I download the PIC24FJ32GA102-I/SP datasheet PDF?
The official PIC24FJ32GA102 datasheet is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24FJ32GA102. Select the PIC24FJ32GA family data sheet for the authoritative memory map, electrical characteristics, package dimensions, and complete 28-pin descriptions.
Where can I find the PIC24FJ32GA102-I/SP pinout?
The authoritative PIC24FJ32GA102-I/SP pinout appears in the pin-description table of the Microchip PIC24FJ32GA family datasheet. The part uses a 28-pin SPDIP, but designers should assign signals from the datasheet table rather than infer them from the package drawing because VSS, VDD, programming, and I/O functions occupy specific numbered positions.
How much memory does the PIC24FJ32GA102-I/SP have?
The PIC24FJ32GA102-I/SP provides 32 KB of Flash program memory, organized as 11K × 24 program words, and 8 KB of RAM. According to the Microchip product page, the 32 KB Flash supports firmware storage while the RAM accommodates working variables, protocol buffers, and application data.
What is the operating voltage of PIC24FJ32GA102-I/SP?
The PIC24FJ32GA102-I/SP operates from 2 V to 3.6 V, with 2.5 V and 3.3 V identified as the nominal supply options. The Microchip family documentation should be consulted for current limits, decoupling requirements, and operating characteristics for each power mode.
Which communication peripherals are available on PIC24FJ32GA102-I/SP?
The PIC24FJ32GA102-I/SP includes I2C, SPI, UART/USART, and IrDA connectivity. These interfaces allow the microcontroller to communicate with sensors, EEPROMs, transceivers, displays, and other embedded equipment without requiring separate serial-interface controllers.
Where to buy PIC24FJ32GA102-I/SP online?
Use the Request a Quote form on this page to request availability and a quotation for the exact PIC24FJ32GA102-I/SP. The form helps preserve the industrial-grade -I suffix and 28-pin SPDIP package rather than accepting a mechanically or electrically different package variant.
What is the price of PIC24FJ32GA102-I/SP?
Current commercial pricing for PIC24FJ32GA102-I/SP is handled through the Request a Quote form on this page. Submit the exact MPN and required quantity, including the acceptable -I/SP package configuration, so the quotation reflects the correct device rather than a QFN or different-temperature alternative.
What is the lead time for PIC24FJ32GA102-I/SP?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with the exact suffix, production volume, and supply status, so it should be confirmed for PIC24FJ32GA102-I/SP before a purchase order is committed.
Is PIC24FJ32GA102-I/SP in stock?
Use the Request a Quote form on this page to check current stock and order allocation for PIC24FJ32GA102-I/SP. Availability should be confirmed for the exact industrial-grade 28-pin SPDIP ordering code to avoid receiving a different package or temperature option.
PIC24FJ32GA102-I/SP vs PIC24FJ32GA102-I/ML - which is better?
Choose PIC24FJ32GA102-I/SP when the board requires a 28-pin through-hole SPDIP footprint. Choose PIC24FJ32GA102-I/ML when the PCB uses a 28-pin 6 × 6 mm QFN package. Although both are identified as 32 MHz, 32 KB Flash PIC24FJ32GA102 devices, their physical footprints are not interchangeable.
When should I choose PIC24FJ32GA102-I/SP over another PIC24 variant?
Choose PIC24FJ32GA102-I/SP when a design needs 32 MHz operation, 32 KB Flash, 8 KB RAM, 21 I/O pins, and a through-hole 28-pin SPDIP layout. Retain the -I suffix for the industrial-temperature option and verify pin, voltage, programming, and memory requirements against the family datasheet before layout release.
Is PIC24FJ32GA102-I/SP suitable for a low-power sensor node?
Yes, the PIC24FJ32GA102-I/SP is suitable for a low-power sensor node because it belongs to the PIC24 XLP family and provides integrated I2C, SPI, UART/USART, and IrDA peripherals for compact sensor connectivity. Sleep-mode current, wakeup timing, and peripheral shutdown behavior must be evaluated in the final power-budget design.
What can replace PIC24FJ32GA102-I/SP?
No verified drop-in replacement with the identical 28-pin SPDIP footprint is established by the available cross-reference results. PIC24FJ32GA102-I/ML is a 28-pin QFN device rather than a true drop-in substitute, and variants using other package suffixes require PCB changes. Request a manufacturer-assisted cross-reference for qualified alternatives.
What is the best cross-brand equivalent for PIC24FJ32GA102-I/SP?
No verified cross-brand drop-in equivalent is identified for the PIC24FJ32GA102-I/SP in the available cross-reference results. A valid substitute must match the 28-pin SPDIP footprint, pin functions, 32 KB Flash, 8 KB RAM, supply range, and programming/debug requirements; use Microchip's cross-reference search to evaluate qualified options.

Datos de referencia de ingeniería para PIC24FJ32GA102-I/SP — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose PIC24FJ32GA102-I/SP when the target board specifically requires a 16-bit PIC24 XLP microcontroller with 32 MHz operation, 32 KB Flash, 8 KB RAM, 21 I/O pins, and a 28-pin through-hole SPDIP footprint. It is particularly useful for prototypes, industrial sensor nodes, compact instruments, and control panels where the I suffix supports an extended industrial temperature option. PIC24FJ32GA102-I/ML offers the same base device in a 6 × 6 mm QFN package, but it is not a drop-in replacement because its land pattern and assembly method differ. Other package or temperature variants should be treated as distinct rather than substituted automatically. Final selection should be confirmed against the complete family pin table, electrical limits, programming requirements, and intended operating environment.

Notas de diseño

Follow the manufacturer's pin-description table when assigning the 28 SPDIP positions; do not infer VDD, VSS, programming, or I/O functions from a generic socket drawing. Place the required bypass capacitors adjacent to the device's supply pins, keep the ground return path short, and reserve unobstructed access for the ICSP programming and debugging signals.

Design the board around the 2 V to 3.6 V device supply range and select external components with ratings appropriate for the maximum rail. Brown-out detection is useful for controlled recovery, but it does not replace input filtering or protection. Validate startup, reset, and actuator transitions in the final power-supply network because current pulses can create disturbances beyond steady-state operating conditions.

The /SP suffix identifies a 28-pin SPDIP and must not be confused with /ML, which uses a 28-pin QFN footprint. Likewise, the -I industrial-temperature designation should be retained explicitly. Before substituting any related device, compare the complete pin table, memory size, peripheral set, supply limits, programming interface, and package drawing rather than relying only on the family name.

Separate analog and digital return currents where the application permits, keep switching-regulator and high-current actuator paths away from sensitive signal traces, and use a compact ground reference around the MCU. Check oscillator and timing requirements against the family datasheet before finalizing track lengths. The through-hole package makes prototype rework easy, but lead-free soldering and through-hole thermal performance still require process validation.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements are present in the referenced product information. The part is an industrial-temperature microcontroller; the -I grade alone is not evidence of AEC-Q100 qualification.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PIC24FJ32GA102-I/SP datasheet PIC24FJ32GA102-I/SP pinout PIC24FJ32GA102-I/SP specifications PIC24FJ32GA102 datasheet pdf PIC24FJ32GA102-I/SP price PIC24FJ32GA102-I/SP stock PIC24FJ32GA102-I/SP equivalent PIC24FJ32GA102-I/SP replacement PIC24FJ32GA102 vs PIC24FJ32GA102-I/ML Microchip PIC24FJ32GA102-I/SP PIC24FJ32GA102 32MHz 32KB Flash PIC24FJ32GA102 28 pin SPDIP

Componentes & términos relacionados

Microchip Technology PIC24FJ32GA102-I/SP PIC24FJ32GA102 PIC24FJ32GA002 PIC24 PIC24 XLP 16-bit RISC microcontroller embedded microcontroller flash memory microcontroller semiconductor 32 MHz 16 MIPS 32 KB Flash 8 KB RAM 21 I/O pins I2C SPI UART/USART IrDA PWM watchdog timer brown-out detection In-Circuit Serial Programming 28-pin SPDIP SPDIP package family through-hole package surface mount nanoWatt XLP technology low-power embedded control industrial sensor interface blood-pressure monitor environmental monitor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ