PIC24FJ32GA102-I/SP - 32MHz 16-Bit MCU | Microchip
MPN: PIC24FJ32GA102-I/SP ✓ NakahandaPIC24FJ32GA102-I/SP Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The PIC24 belongs to the 16-bit RISC microcontroller family and is designed for embedded control, where firmware and integrated peripherals replace many discrete logic components. Low-power XLP operating modes are especially useful in battery-powered instruments, portable monitors, and connected sensor nodes.
The 32 KB Flash memory provides 11K × 24 program words, while 8 KB of RAM supports working state, buffers, and communication frames. Twenty-one I/O pins allow the device to connect sensors, displays, switches, actuators, and serial peripherals. The integrated serial interfaces support I2C, SPI, UART/USART, and IrDA, reducing both PCB area and firmware overhead.
The -I/SP ordering identifies the industrial-temperature, 28-pin SPDIP configuration. The -I temperature designation supports operation across an extended industrial temperature range, while the /SP package suffix identifies the through-hole package. A 2.5 V or 3.3 V operating design point is typical, with the listed supply range extending from 2 V to 3.6 V.
Typical uses include blood-pressure monitors, industrial sensor interfaces, compact control panels, portable medical instruments, and low-power embedded nodes. The 32 MHz core provides deterministic control headroom, while PWM and watchdog functions support motor, lighting, and safety-monitored control loops. The 28-pin package also supports through-hole assembly and prototype workflows.
For a new PCB, reserve decoupling close to each supply pin, route ICSP programming and debugging access to the assigned pins, and confirm oscillator, reset, and I/O assignments against the manufacturer pin-description table. Use a 3.3 V-compatible programmer and specify the exact suffix in the production bill of materials.
This page combines manufacturer product information, memory specifications, connectivity details, application guidance, and replacement-analysis constraints to support component selection, schematic review, sourcing, and firmware bring-up for the PIC24FJ32GA102-I/SP.
Mga alternatibo na pwedeng ilagay na PIC24FJ32GA102-I/SP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ32GA102-I/SP (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboPIC24FJ32GA102-I/SP Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit RISC flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 32 KB (11K × 24 words) |
| RAM Memory | 8 KB |
| I/O Pin Count | 21 pins |
| Supply Voltage Range | 2 V to 3.6 V |
| Nominal Operating Voltages | 2.5 V or 3.3 V |
| Packhaging | 28-pin SPDIP |
| Uri ng Pagpapasok | Through-hole |
| Temperature Grade | Industrial grade (-I) |
| Serial Interfaces | I2C, SPI, UART/USART, and IrDA |
| Timer and Control Peripherals | PWM and watchdog timer |
| Voltage Monitoring | Brown-out detection |
| Programming Interface | In-Circuit Serial Programming (ICSP) |
| Debugging Interface | ICSP debugging with PGEC/PGED pins |
| Low-Power Technology | nanoWatt XLP technology |
Gabay sa Pin Configuration ng PIC24FJ32GA102-I/SP 28-pin spdip
Pin configuration para sa PIC24FJ32GA102-I/SP (28-pin spdip package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24FJ32GA102-I/SP.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24FJ32GA102-I/SP ay nararapat para sa 6 aplikasyons: Blood-Pressure Monitor Control, Industrial Sensor Interface, Portable Medical Instrument, Low-Power Environmental Monitor, Compact Motor Control, Programmable Control Panel.
Blood-Pressure Monitor Control
The PIC24FJ32GA102-I/SP fits a compact blood-pressure monitor because its 32 MHz processor provides 16 MIPS of instruction throughput for pump timing, user-interface control, and measurement sequencing. Its 8 KB RAM can hold working samples and interface state, while the 21 I/O pins support switches, displays, and sensor signaling. Integrated I2C, SPI, UART/USART, and IrDA interfaces reduce the need for separate interface devices. The 28-pin SPDIP package also simplifies prototype construction. Firmware should use the watchdog timer for pump and measurement-loop recovery, and the design must validate brown-out behavior during motor and actuator transitions.
Inirekomenda
Industrial Sensor Interface
The PIC24FJ32GA102-I/SP is appropriate for an industrial sensor interface requiring local acquisition, configuration, and communication. The 16-bit RISC core operating at 32 MHz can service multiple protocols and control tasks, while 32 KB of Flash preserves room for application firmware and calibration logic. Twenty-one I/O pins provide discrete digital sensor channels, indicators, and actuator controls. I2C and SPI support common sensors and memory devices, and UART/USART or IrDA can connect the node to a higher-level controller. Brown-out detection helps protect the node during industrial supply disturbances, while the industrial -I grade supports extended-temperature operation.
Inirekomenda
Portable Medical Instrument
The PIC24FJ32GA102-I/SP can serve as the control core in a portable medical instrument where compactness, low-power operation, and deterministic control are important. Its 32 MHz performance supports acquisition scheduling, signal conditioning coordination, display updates, and button handling without an external processor. The 8 KB RAM accommodates short-term measurement buffers, while 32 KB Flash holds firmware and constants. XLP power modes help reduce energy use between measurements, and the integrated brown-out detector can support safe recovery from supply disturbances. A medical design must still apply the appropriate risk controls, validation, and external protection required for its intended use.
Inirekomenda
Low-Power Environmental Monitor
The PIC24FJ32GA102-I/SP suits an environmental monitor that combines periodic sensing with low standby consumption. Its 32 MHz core provides enough performance to sample, filter, timestamp, and format data locally, while XLP operating modes can reduce energy use between measurement intervals. The 21 I/O pins can support digital probes, indicators, and power-control signals, and the integrated serial interfaces permit connection to radio or storage modules. Eight kilobytes of RAM is suitable for modest sample buffers and protocol state. Brown-out detection helps identify unstable supply conditions, while the 28-pin SPDIP package simplifies through-hole prototypes and laboratory rework.
Inirekomenda
Compact Motor Control
The PIC24FJ32GA102-I/SP can coordinate a small motor or actuator in a compact embedded controller. The 32 MHz, 16-bit processing core provides faster control-loop execution than needed for many basic PWM duties, leaving capacity for position sensing, fault detection, and communications. Integrated PWM and watchdog-timer functions support deterministic actuator drive and recovery, while 21 I/O pins provide sensor inputs and control outputs. The device's 2 V to 3.6 V range permits integration with low-voltage power systems. Designers should size transistor drive paths, provide flyback protection, and verify startup and stall behavior across the full motor-supply range.
Inirekomenda
Programmable Control Panel
The PIC24FJ32GA102-I/SP works well in a programmable control panel because 21 I/O pins can operate displays, indicators, switches, relays, and status LEDs. Its 32 KB Flash provides space for menu logic, configuration data, and firmware, while 8 KB RAM supports display and event-handling tasks. I2C and SPI can connect digital displays or memory, and UART/USART enables a host or service interface. At 32 MHz, the MCU can manage user input and periodic diagnostics concurrently. The 28-pin SPDIP package is useful for through-hole prototypes, although a production redesign may favor a smaller surface-mount package after the prototype is validated.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24FJ32GA102-I/SP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Talaan ng Disenyo
Follow the manufacturer's pin-description table when assigning the 28 SPDIP positions; do not infer VDD, VSS, programming, or I/O functions from a generic socket drawing. Place the required bypass capacitors adjacent to the device's supply pins, keep the ground return path short, and reserve unobstructed access for the ICSP programming and debugging signals.
Design the board around the 2 V to 3.6 V device supply range and select external components with ratings appropriate for the maximum rail. Brown-out detection is useful for controlled recovery, but it does not replace input filtering or protection. Validate startup, reset, and actuator transitions in the final power-supply network because current pulses can create disturbances beyond steady-state operating conditions.
The /SP suffix identifies a 28-pin SPDIP and must not be confused with /ML, which uses a 28-pin QFN footprint. Likewise, the -I industrial-temperature designation should be retained explicitly. Before substituting any related device, compare the complete pin table, memory size, peripheral set, supply limits, programming interface, and package drawing rather than relying only on the family name.
Separate analog and digital return currents where the application permits, keep switching-regulator and high-current actuator paths away from sensitive signal traces, and use a compact ground reference around the MCU. Check oscillator and timing requirements against the family datasheet before finalizing track lengths. The through-hole package makes prototype rework easy, but lead-free soldering and through-hole thermal performance still require process validation.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements are present in the referenced product information. The part is an industrial-temperature microcontroller; the -I grade alone is not evidence of AEC-Q100 qualification.