PIC24FJ32GA102-I/SP - 32MHz 16-Bit MCU | Microchip
MPN: PIC24FJ32GA102-I/SP ✓ सक्रियPIC24FJ32GA102-I/SP अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The PIC24 belongs to the 16-bit RISC microcontroller family and is designed for embedded control, where firmware and integrated peripherals replace many discrete logic components. Low-power XLP operating modes are especially useful in battery-powered instruments, portable monitors, and connected sensor nodes.
The 32 KB Flash memory provides 11K × 24 program words, while 8 KB of RAM supports working state, buffers, and communication frames. Twenty-one I/O pins allow the device to connect sensors, displays, switches, actuators, and serial peripherals. The integrated serial interfaces support I2C, SPI, UART/USART, and IrDA, reducing both PCB area and firmware overhead.
The -I/SP ordering identifies the industrial-temperature, 28-pin SPDIP configuration. The -I temperature designation supports operation across an extended industrial temperature range, while the /SP package suffix identifies the through-hole package. A 2.5 V or 3.3 V operating design point is typical, with the listed supply range extending from 2 V to 3.6 V.
Typical uses include blood-pressure monitors, industrial sensor interfaces, compact control panels, portable medical instruments, and low-power embedded nodes. The 32 MHz core provides deterministic control headroom, while PWM and watchdog functions support motor, lighting, and safety-monitored control loops. The 28-pin package also supports through-hole assembly and prototype workflows.
For a new PCB, reserve decoupling close to each supply pin, route ICSP programming and debugging access to the assigned pins, and confirm oscillator, reset, and I/O assignments against the manufacturer pin-description table. Use a 3.3 V-compatible programmer and specify the exact suffix in the production bill of materials.
This page combines manufacturer product information, memory specifications, connectivity details, application guidance, and replacement-analysis constraints to support component selection, schematic review, sourcing, and firmware bring-up for the PIC24FJ32GA102-I/SP.
के लिए ड्रॉप-इन विकल्प PIC24FJ32GA102-I/SP — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC24FJ32GA102-I/SP (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mounting Type, Package.
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंPIC24FJ32GA102-I/SP Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit RISC flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 32 KB (11K × 24 words) |
| RAM Memory | 8 KB |
| I/O Pin Count | 21 pins |
| Supply Voltage Range | 2 V to 3.6 V |
| Nominal Operating Voltages | 2.5 V or 3.3 V |
| पैकेज | 28-pin SPDIP |
| माउंटिंग प्रकार | Through-hole |
| Temperature Grade | Industrial grade (-I) |
| Serial Interfaces | I2C, SPI, UART/USART, and IrDA |
| Timer and Control Peripherals | PWM and watchdog timer |
| Voltage Monitoring | Brown-out detection |
| Programming Interface | In-Circuit Serial Programming (ICSP) |
| Debugging Interface | ICSP debugging with PGEC/PGED pins |
| Low-Power Technology | nanoWatt XLP technology |
PIC24FJ32GA102-I/SP 28-pin spdip पिन कॉन्फ़िगरेशन गाइड
PIC24FJ32GA102-I/SP (28-pin spdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC24FJ32GA102-I/SP.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PIC24FJ32GA102-I/SP के लिए उपयुक्त है 6 अनुप्रयोगs: Blood-Pressure Monitor Control, Industrial Sensor Interface, Portable Medical Instrument, Low-Power Environmental Monitor, Compact Motor Control, Programmable Control Panel.
Blood-Pressure Monitor Control
The PIC24FJ32GA102-I/SP fits a compact blood-pressure monitor because its 32 MHz processor provides 16 MIPS of instruction throughput for pump timing, user-interface control, and measurement sequencing. Its 8 KB RAM can hold working samples and interface state, while the 21 I/O pins support switches, displays, and sensor signaling. Integrated I2C, SPI, UART/USART, and IrDA interfaces reduce the need for separate interface devices. The 28-pin SPDIP package also simplifies prototype construction. Firmware should use the watchdog timer for pump and measurement-loop recovery, and the design must validate brown-out behavior during motor and actuator transitions.
अनुशंसित
Industrial Sensor Interface
The PIC24FJ32GA102-I/SP is appropriate for an industrial sensor interface requiring local acquisition, configuration, and communication. The 16-bit RISC core operating at 32 MHz can service multiple protocols and control tasks, while 32 KB of Flash preserves room for application firmware and calibration logic. Twenty-one I/O pins provide discrete digital sensor channels, indicators, and actuator controls. I2C and SPI support common sensors and memory devices, and UART/USART or IrDA can connect the node to a higher-level controller. Brown-out detection helps protect the node during industrial supply disturbances, while the industrial -I grade supports extended-temperature operation.
अनुशंसित
Portable Medical Instrument
The PIC24FJ32GA102-I/SP can serve as the control core in a portable medical instrument where compactness, low-power operation, and deterministic control are important. Its 32 MHz performance supports acquisition scheduling, signal conditioning coordination, display updates, and button handling without an external processor. The 8 KB RAM accommodates short-term measurement buffers, while 32 KB Flash holds firmware and constants. XLP power modes help reduce energy use between measurements, and the integrated brown-out detector can support safe recovery from supply disturbances. A medical design must still apply the appropriate risk controls, validation, and external protection required for its intended use.
अनुशंसित
Low-Power Environmental Monitor
The PIC24FJ32GA102-I/SP suits an environmental monitor that combines periodic sensing with low standby consumption. Its 32 MHz core provides enough performance to sample, filter, timestamp, and format data locally, while XLP operating modes can reduce energy use between measurement intervals. The 21 I/O pins can support digital probes, indicators, and power-control signals, and the integrated serial interfaces permit connection to radio or storage modules. Eight kilobytes of RAM is suitable for modest sample buffers and protocol state. Brown-out detection helps identify unstable supply conditions, while the 28-pin SPDIP package simplifies through-hole prototypes and laboratory rework.
अनुशंसित
Compact Motor Control
The PIC24FJ32GA102-I/SP can coordinate a small motor or actuator in a compact embedded controller. The 32 MHz, 16-bit processing core provides faster control-loop execution than needed for many basic PWM duties, leaving capacity for position sensing, fault detection, and communications. Integrated PWM and watchdog-timer functions support deterministic actuator drive and recovery, while 21 I/O pins provide sensor inputs and control outputs. The device's 2 V to 3.6 V range permits integration with low-voltage power systems. Designers should size transistor drive paths, provide flyback protection, and verify startup and stall behavior across the full motor-supply range.
अनुशंसित
Programmable Control Panel
The PIC24FJ32GA102-I/SP works well in a programmable control panel because 21 I/O pins can operate displays, indicators, switches, relays, and status LEDs. Its 32 KB Flash provides space for menu logic, configuration data, and firmware, while 8 KB RAM supports display and event-handling tasks. I2C and SPI can connect digital displays or memory, and UART/USART enables a host or service interface. At 32 MHz, the MCU can manage user input and periodic diagnostics concurrently. The 28-pin SPDIP package is useful for through-hole prototypes, although a production redesign may favor a smaller surface-mount package after the prototype is validated.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा PIC24FJ32GA102-I/SP — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
डिज़ाइन नोट्स
Follow the manufacturer's pin-description table when assigning the 28 SPDIP positions; do not infer VDD, VSS, programming, or I/O functions from a generic socket drawing. Place the required bypass capacitors adjacent to the device's supply pins, keep the ground return path short, and reserve unobstructed access for the ICSP programming and debugging signals.
Design the board around the 2 V to 3.6 V device supply range and select external components with ratings appropriate for the maximum rail. Brown-out detection is useful for controlled recovery, but it does not replace input filtering or protection. Validate startup, reset, and actuator transitions in the final power-supply network because current pulses can create disturbances beyond steady-state operating conditions.
The /SP suffix identifies a 28-pin SPDIP and must not be confused with /ML, which uses a 28-pin QFN footprint. Likewise, the -I industrial-temperature designation should be retained explicitly. Before substituting any related device, compare the complete pin table, memory size, peripheral set, supply limits, programming interface, and package drawing rather than relying only on the family name.
Separate analog and digital return currents where the application permits, keep switching-regulator and high-current actuator paths away from sensitive signal traces, and use a compact ground reference around the MCU. Check oscillator and timing requirements against the family datasheet before finalizing track lengths. The through-hole package makes prototype rework easy, but lead-free soldering and through-hole thermal performance still require process validation.
अनुपालन जानकारी
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements are present in the referenced product information. The part is an industrial-temperature microcontroller; the -I grade alone is not evidence of AEC-Q100 qualification.