R5F10BMGLFB#V5 - 16-Bit 128KB Flash MCU | Renesas
MPN: R5F10BMGLFB#V5 ✓ פעילR5F10BMGLFB#V5 סקירה
An RL78 microcontroller is a 16-bit reduced-instruction-set microcontroller designed for embedded control. Within the product hierarchy, it belongs to the microcontroller, embedded processor, and semiconductor categories. Renesas positions the RL78/F13 family as a successor to the 78K0R and R8C families, with devices offered from 20 to 80 pins and 16KB to 128KB of flash. This makes the family suitable for systems that need deterministic peripheral control, low standby current, and automotive communication interfaces in one device.
The R5F10BMGLFB family configuration provides 128KB flash, integrated CAN, integrated LIN, RAM error-correction capability, a PLL lock function, port-output-state monitoring, and stack monitoring. These features support designs where firmware integrity and communication reliability matter, particularly in body electronics and automotive auxiliary-control modules. The 3.3V and 5V operating points also permit integration with conventional automotive and industrial logic ecosystems.
The device uses a compact 16-bit core rather than a 32-bit processor, keeping code density and processing requirements appropriate for dedicated controllers. Communication peripherals can handle bus traffic without requiring separate protocol controllers, while the PLL supports systems that need a controlled clock source for timers, serial interfaces, or higher-rate communication. Functional-safety diagnostics help designers identify memory and peripheral faults before they become system-level failures.
Typical uses include CAN and LIN gateway controllers, body-control modules, door and locking systems, climate-control interfaces, motor auxiliaries, sensor concentrators, and automotive HVAC controls. The low-power emphasis is valuable in battery-powered or duty-cycled installations where long standby periods are common. A 16-bit architecture is also well suited to real-time tasks that monitor switches, sensors, and actuators without requiring a high-performance application processor.
Designers should confirm the exact pin assignment, peripheral channel allocation, electrical limits, and startup behavior against the R5F10BMG datasheet before releasing a PCB. Automotive production programs should also review qualification requirements, traceability, flash-programming procedures, and hardware validation criteria. The package drawing and pin table must be treated as authoritative because peripheral functions can vary across family members and ordering codes.
This product record combines the RL78/F13 family architecture, verified distributor references, package considerations, and drop-in replacement guidance into one engineering-focused view. It highlights how flash capacity, communication peripherals, low-power operation, and safety diagnostics influence MCU selection for embedded automotive and industrial control designs.
חלופות תחליף ישיר עבור R5F10BMGLFB#V5 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
R5F10BMGLFB#X5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F10BMGLFB#V5Q
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F10BMGLFB#X5Q
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F10BMGLFB#G5
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
R5F10BMG
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F10BMGLFB#V5 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 16-bit RL78/F13 microcontroller |
| Flash Memory | 128 KB |
| Core Architecture | 16-bit RL78 core |
| מתח אספקה | 3.3 V or 5 V |
| מארז | 80-pin LQFP |
| CAN Interface | Integrated CAN module |
| LIN Interface | Integrated LIN module |
| RAM ECC | Supported |
| PLL Lock Function | Supported |
| Port Output State Monitoring | Supported |
| Stack Monitoring | Supported |
| Family Flash Range | 16 KB to 128 KB |
| Family Pin Count Range | 20 to 80 pins |
מדריך תצורת פינים של R5F10BMGLFB#V5 80-pin lqfp
תצורת פינים עבור R5F10BMGLFB#V5 (מארזת 80-pin lqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור R5F10BMGLFB#V5.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
R5F10BMGLFB#V5 מתאים עבור 6 יישוםs: Automotive CAN and LIN Gateway, Body Control Module, Automotive HVAC Control, Door and Locking Controller, Industrial Sensor Concentrator, Low-Power Actuator Node.
Automotive CAN and LIN Gateway
The R5F10BMGLFB#V5 fits an automotive communication gateway because it combines a 16-bit RL78/F13 core, 128KB flash, an integrated CAN module, and an integrated LIN module in an 80-pin LQFP package. A gateway can use CAN for vehicle-network traffic and LIN for lower-cost body peripherals without adding separate bus controllers. RAM ECC, PLL-lock detection, port-output-state monitoring, and stack monitoring improve diagnostic coverage for communication nodes that must remain available after a transient fault. The 128KB flash also provides room for protocol conversion, message filtering, diagnostics, and application firmware. Before layout release, verify the exact CAN and LIN channel assignments, alternate-function pins, transceiver requirements, and termination strategy against the R5F10BMG datasheet and the chosen bus topology.
מומלץ
Body Control Module
The R5F10BMGLFB#V5 is suitable for a body-control module that coordinates switches, locks, lamps, and auxiliary loads. Its 16-bit architecture supports responsive state-machine and debounce tasks without the memory overhead of a larger processor, while 128KB flash accommodates application logic, diagnostics, and communication handlers. Integrated CAN and LIN allow the module to bridge vehicle network segments and connect inexpensive sensors or actuators. The integrated monitoring functions support designs in which unexpected port behavior, stack faults, or PLL-lock loss must be reported. The 80-pin LQFP provides enough I/O density for input conditioning and actuator outputs, subject to the exact pin-multiplexing map. Firmware designers should also implement debounce, output default states, watchdog servicing, and diagnostic reporting for every externally controlled circuit.
מומלץ
Automotive HVAC Control
The R5F10BMGLFB#V5 can serve as the control MCU for an automotive climate-control module because it combines low-power RL78/F13 operation with 128KB flash and both CAN and LIN interfaces. The MCU can acquire switch and temperature-sensor inputs, drive fan or valve outputs, and communicate status through the vehicle network. Its 16-bit core is well matched to discrete control loops, timers, and state management rather than graphics or high-bandwidth processing. RAM ECC and PLL-lock monitoring add useful integrity checks where reliable actuator control and stable clocking are important. Use the MCU in a duty-cycled architecture when low standby consumption is required, but confirm the exact active and sleep currents before finalizing the power budget. Pin assignments, ADC channels, timer outputs, and wake-up behavior must be verified in the manufacturer documentation.
מומלץ
Door and Locking Controller
The R5F10BMGLFB#V5 is a practical controller for an automotive door, latch, or centralized locking module. The integrated LIN interface can communicate with distributed door modules, while CAN supports vehicle-level status reporting and diagnostics. Its 128KB flash is sufficient for event logging, debounce logic, actuator timing, and communication firmware, while the 16-bit core supports deterministic task execution. Port-output-state monitoring is particularly relevant when the firmware must verify that an external latch or relay command reached its intended state. The controller can operate from 3.3V or 5V logic, allowing integration with compatible vehicle electrical systems when the required transceiver and protection components are selected. Engineering validation should cover reverse-battery exposure, transient pulses, stuck-output detection, wake-up behavior, and the operating-temperature requirement of the exact ordering code.
מומלץ
Industrial Sensor Concentrator
The R5F10BMGLFB#V5 can be used in an industrial sensor concentrator that gathers inputs from mixed communication peripherals and reports their status to a higher-level controller. The 16-bit RL78/F13 core handles protocol servicing and local filtering, and the 128KB flash provides room for calibration tables, diagnostics, and firmware updates. CAN and LIN support industrial CAN equipment and LIN-compatible sensors where those buses are appropriate. Although the family originated with automotive and low-power applications, its communication density and monitoring features also suit compact embedded controllers outside a vehicle. The 3.3V and 5V operating points simplify interface planning with appropriately rated transceivers. The final design must verify clock accuracy, communication timing, input thresholds, and power-supply tolerance; the MCU alone does not provide bus-line protection or transceiver biasing.
מומלץ
Low-Power Actuator Node
The R5F10BMGLFB#V5 is suitable for a dedicated low-power actuator node where the controller periodically reads sensors, drives a motor or valve, and then returns to a low-consumption state. The RL78/F13 family's low-consumption emphasis is advantageous in battery-operated or intermittently powered installations, while 128KB flash leaves room for control algorithms and diagnostics. CAN or LIN communication lets the node participate in a distributed architecture without using a higher-cost communications processor. The 80-pin LQFP can accommodate the necessary digital I/O, timers, and serial functions, subject to the device's multiplexing limitations. Firmware should use the lowest acceptable clock and peripheral configuration during idle periods, validate wake sources, and preserve output states safely across sleep transitions. Actual battery-life calculations require the exact sleep current, wake-up time, and active duty cycle from the datasheet.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור R5F10BMGLFB#V5 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | R5F10BMGLFB#X5 | R5F10BMGLFB#V5Q | R5F10BMGLFB#X5Q | R5F10BMGLFB#G5 | R5F10BMG |
|---|---|---|---|---|---|---|
| Package | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP base device |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Operating Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| CAN Interface | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| LIN Interface | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| RAM ECC | Supported | Supported | Supported | Supported | Supported | Supported |
| Ordering Condition | #V5 | #X5 | #V5Q | #X5Q | #G5 | Base ordering code |
מבדילים עיקריים
- Combines two automotive communication interfaces in one controller (לעומתR5F10BMG)
- Provides diagnostic coverage beyond basic peripheral operation (לעומתR5F10BMGLFB#X5)
- Uses a high-density 80-pin package for mixed automotive control I/O (לעומתR5F10BLGLFB#V5)
הערות תכנון
Assign every MCU pin from the R5F10BMG manufacturer pin table before schematic capture. Several RL78/F13 functions are multiplexed, so a peripheral choice can change whether a pin is available for general-purpose input, output, or a communications function. Preserve the package orientation, exposed thermal strategy if applicable, and all required programming and debug nets. Because an 80-pin LQFP is not represented by a dedicated package drawing in the available library, compare the board footprint directly against the manufacturer package drawing.
Design the 3.3V and 5V operating paths around the manufacturer's absolute maximum and recommended operating conditions. Place supply bypass capacitors adjacent to the appropriate power pins, with the shortest return path through a low-impedance ground plane. Confirm whether the selected ordering code supports the intended rail and whether separate internal voltage regulators require external components. Estimated: total regulator dissipation is approximately P = (VIN - VOUT) × ILOAD plus internal overhead; use the actual rail difference and maximum load when sizing copper area.
Do not treat a suffix change as automatically production-equivalent. Ordering codes can encode temperature range, automotive qualification, quality grade, or packaging conditions even when the core, flash capacity, and footprint match. For an automotive replacement, compare the relevant ordering tables, qualification evidence, errata, flash-programming procedure, and traceability requirements. Also verify reset polarity, boot configuration, oscillator options, and watchdog behavior before substituting one ordering code for another.
Keep CAN and LIN routing short, controlled, and away from switching nodes and high-current actuator outputs. Provide the correct transceiver, common-mode protection, termination, and bias networks because the MCU contains only the digital controller interface. Maintain a continuous ground reference beneath communication routes, use appropriate via stitching around the MCU ground pins, and route sensitive oscillator or reset nets away from motor-control traces. Validate bus levels and timing on hardware using the selected transceiver and representative cable lengths.
Use the safety-monitoring resources as part of the application diagnostics rather than as a substitute for a watchdog and external protection. RAM ECC reports detected memory errors, PLL-lock monitoring confirms clock stability, port-output monitoring helps identify unexpected output states, and stack monitoring can expose stack faults. Design firmware to record these events, enter a defined safe state, and preserve diagnostic evidence. Confirm the behavior and interrupt requirements for each function in the manufacturer datasheet.
מידע על תאימות
The RL78/F13 family and related automotive ordering codes are documented, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact R5F10BMGLFB#V5 ordering code require manufacturer documentation.