Skyworks Solutions

SI3241-D-GQ Quad ProSLIC SLIC/Codec 3.3V 100-eTQFP | Skyworks

N.º de pieza: SI3241-D-GQ ✓ Activo
3.3 V Vdss 100-pin eTQFP (14 x 14 mm) with exposed pad Package
MOQ: 1 |

SI3241-D-GQ Descripción general

The Skyworks Solutions Inc. SI3241-D-GQ is a quad-channel ProSLIC subscriber line interface circuit (SLIC) and codec that integrates four independent voice channels onto a single 3.3 V integrated circuit in a 100-pin eTQFP (14 x 14 mm) package with an exposed thermal pad. It is a programmable CMOS SLIC/codec device whose channels each deliver 63 dB of gain and whose host-side interfaces include GCI, PCM and SPI.

A SLIC, or subscriber line interface circuit, is the analog front-end block that sits between a public switched telephone network line and the digital voice equipment behind it. In the hierarchy of telecommunications semiconductors, a SLIC is a voice-access interface IC, a subcategory of interface ICs that converts analog line signals into digital PCM bit streams while also providing DC feed, ring generation, hook detection and loop supervision. A combined SLIC/codec such as the SI3241 merges those analog functions with a digital voice codec so a single device can terminate four analog lines and deliver four channels of compressed or uncompressed voice to a host processor.

Key characteristics of this device include four integrated voice channels per package, a 3.3 V supply rail, and multiple host-side serial interfaces, so one IC can replace four discrete line-interface front ends. The silicon is a programmable CMOS design: channel gain, impedance, DC feed and filter behavior are configured through registers rather than external components, which simplifies the analog bill of materials and shortens design-in time for voice gateways, DSL access equipment and VoIP media gateways. Because the same silicon supports both classic PCM and GCI/PCM/SPI transport, the device spans legacy TDM designs as well as modern packet-voice designs.

Architecturally, each of the four channels combines a line-side driver and receiver, the voice codec, and the supervision logic behind a common register interface, with a shared digital backplane to the host. The part is offered in a 100-lead eTQFP with a thermally and electrically connected exposed pad, which lowers package thermal resistance and lets the pad be tied to the ground plane on multilayer boards. The exposed pad must be soldered and connected, otherwise both heat dissipation and the device's ground return degrade. Ordering codes such as -D-GQ denote the die revision, grade and tray packaging, and the -R suffix denotes the same die in tape-and-reel form.

Typical applications include multi-channel VoIP analog terminal adapters, voice-over-PON and DSL voice gateways, digital loop carrier and line-card designs, PBX trunk interfaces, and industrial voice monitoring equipment where four lines must be digitized per board. Because each channel is register-programmable, the same hardware can be reconfigured in the field for different line impedances and country-specific DC feed requirements, which is a significant advantage over fixed analog front ends.

A key design consideration is that the exposed pad and the high line-side drive currents make careful layout mandatory: keep the analog line traces short and isolated from the digital backplane, provide solid decoupling on the 3.3 V rail, and follow the manufacturer's reference layout for the pad connection and the line-side network. A second consideration is that the silicon is mature but still widely supported, so firmware drivers for this ProSLIC family are broadly available.

This page consolidates distributor availability, package and ordering-code detail, drop-in ordering options within the SI3241 family, and practical layout and thermal guidance into a single engineering reference that complements, rather than repeats, the manufacturer datasheet.

Alternativas directas para SI3241-D-GQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

SI3241-D-FQ

✅ Sustitución directa
📦 100-pin eTQFP (14 x 14 mm) with exposed pad
same 100-pin eTQFP footprint and pinout; adds internal diagnostics for real-time channel status monitoring, otherwise identical 4-channel 3.3 V ProSLIC function

📋 Alternativa de referencia (no en el catálogo)

SI3241-GQ

✅ Sustitución directa
📦 100-pin eTQFP (14 x 14 mm) with exposed pad
same SI3241 family, same 4-channel 3.3 V 63 dB silicon and same 100-pin eTQFP pinout; differs only in die revision and grade suffix code

📋 Alternativa de referencia (no en el catálogo)

SI3241

✅ Sustitución directa
📦 100-pin eTQFP (14 x 14 mm) with exposed pad
base family order code of the same quad ProSLIC CMOS SLIC/codec; same 4 channels, 3.3 V supply and eTQFP footprint, with suffix-specific grade/revision selection

📋 Alternativa de referencia (no en el catálogo)

SI3241-D-GQR

✅ Sustitución directa
📦 100-pin eTQFP (14 x 14 mm) with exposed pad
identical silicon and pinout to SI3241-D-GQ, supplied in tape-and-reel rather than tray packaging (0% electrical difference)

📋 Alternativa de referencia (no en el catálogo)

SI3241-D-GQ Especificaciones

Product Type Telecom IC - Subscriber Line Interface Concept (SLIC) / Codec, programmable CMOS
Number of Channels 4 channels
Number of Circuits 4
Tensión de alimentación 3.3 V
Gain 63 dB
Host Interfaces GCI, PCM, SPI
Encapsulado 100-pin eTQFP (14 x 14 mm) with exposed pad
Recuento de pines 100 pins
Tipo de montaje Surface mount
Packaging Tray
Ordering Code Suffix -D-GQ (die revision D, grade G, tray packaging)
Reel Ordering Variant -D-GQR (tape and reel)
Exposed Thermal Pad Yes, exposed pad on eTQFP package
Analog Line Functions Line-side driver/receiver, DC feed, ring generation, loop supervision
Datasheet Publication SI3241 datasheet PDF, published 2013-05-21

Guía de configuración de pines de SI3241-D-GQ 100-pin etqfp (14 x 14 mm) with exposed pad

Configuración de pines para SI3241-D-GQ (encapsulado 100-pin etqfp (14 x 14 mm) with exposed pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 100-pin etqfp (14 x 14 mm) with exposed pad para SI3241-D-GQ

No hay datos detallados de patillaje disponibles para SI3241-D-GQ.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SI3241-D-GQ es adecuado para 6 aplicacións: VoIP Analog Terminal Adapter (ATA), Voice-over-PON and DSL Voice Gateway, Digital Loop Carrier and Line Card, PBX and Trunk Line Interface, Industrial Voice Monitoring and Test Equipment, PBX VoIP Hybrid and Call-Center Line Card.

📱

VoIP Analog Terminal Adapter (ATA)

The SI3241-D-GQ suits a four-line analog terminal adapter because one package terminates four PSTN lines, digitizes them and presents them to a host processor over PCM, GCI or SPI. Each channel delivers 63 dB of gain with register-configurable line impedance and DC feed, so a single 3.3 V IC replaces four discrete analog front ends and their associated external networks. That consolidation shrinks board area in a compact CPE enclosure and lowers the host port count needed for the digital voice backplane, while the register-programmable channels let one hardware design serve different country line conditions.

🌐

Voice-over-PON and DSL Voice Gateway

In a voice gateway that terminates subscriber lines from DSL or fiber access equipment, the SI3241-D-GQ provides four channels of analog line interface and voice codec in a single 100-pin eTQFP (14 x 14 mm) package. The 63 dB gain per channel and programmable CMOS filtering make it practical to match line impedance and DC feed characteristics in firmware rather than with discrete components, which matters when a carrier must support multiple line profiles from the same hardware. Operating from 3.3 V and offering SPI as well as PCM and GCI transports lets the same device interface to either a network processor or a microcontroller-class media engine.

🏭

Digital Loop Carrier and Line Card

The SI3241-D-GQ fits digital loop carrier and line-card designs where several analog subscriber lines must be concentrated behind a single processor. Four SLIC/codec channels per 3.3 V IC keep the analog section of a line card compact, and the register-based configuration of DC feed, ring generation and supervision allows the same board to be reconfigured for different line types without a hardware spin. With host-side choices of GCI, PCM and SPI, the device supports both legacy TDM aggregation equipment and newer packet-voice line cards, and the exposed-pad eTQFP keeps thermal performance acceptable in the card's confined airflow.

☎️

PBX and Trunk Line Interface

For PBX trunk cards and channelized line interfaces, the SI3241-D-GQ provides four channels of line-side drive, receive, DC feed and voice codec functions from one 100-pin eTQFP device. The 63 dB gain figure and register-controlled filtering let trunk cards normalize a wide variety of analog line conditions, while the SPI or PCM digital backplane delivers the digitized voice to the PBX switching fabric. Consolidating four channels per package reduces the number of components on a crowded trunk card, and the 3.3 V supply simplifies power distribution alongside the switching silicon on the same board.

🔧

Industrial Voice Monitoring and Test Equipment

Industrial voice monitoring stations, loop testers and remote line-audio test equipment can use the SI3241-D-GQ to bring four analog lines under software control in one place. Because the channels are register-programmable, a test system can sweep DC feed, ring and supervision conditions and read back loop status without external analog switches, and the diagnostics present in the -F ordering variant of the family extend that visibility to real-time channel status monitoring. The 3.3 V operation and small eTQFP footprint suit dense instrument chassis where each test point needs its own line interface.

🎧

PBX VoIP Hybrid and Call-Center Line Card

In a hybrid PBX or call-center line card, the SI3241-D-GQ allows analog PSTN trunks and analog extensions to be digitized alongside SIP endpoints. Four channels per package mean one IC can serve an entire four-port analog module, and the register-programmable line characteristics let the card auto-configure for the extension length, ring cadence and DC feed of each market. Supporting PCM, GCI and SPI makes it equally usable with a dedicated TDM switch fabric or with a host processor that prefers a serial SPI control path, and the 63 dB gain per channel keeps voice levels consistent across mixed analog and digital ports.

What is the SI3241-D-GQ?
The SI3241-D-GQ is a quad-channel programmable CMOS ProSLIC subscriber line interface circuit and codec from Skyworks Solutions Inc., originally introduced by Silicon Labs. It integrates four analog telephone line channels, their DC feed and supervision circuits, and the associated voice codecs into one 3.3 V device packaged in a 100-pin eTQFP (14 x 14 mm) with an exposed pad. The host interface options listed for the part are GCI, PCM and SPI, allowing it to sit behind either legacy TDM fabric or packet-voice processors.
How many voice channels does the SI3241-D-GQ provide?
The SI3241-D-GQ provides four independent voice channels per package. Manufacturer and distributor listings describe the device as a 4-channel SLIC with a 63 dB gain figure and four internal circuits, which means one silicon replaces what would otherwise require four discrete line-interface front ends. In a typical voice gateway this consolidates four analog lines into one 3.3 V IC, cutting both board area and the number of host-side serial ports needed.
What supply voltage does the SI3241-D-GQ run from?
The SI3241-D-GQ operates from a 3.3 V supply, as stated in the distributor specification listings for the part. Because the device mixes high-gain line-side amplification with digital logic, the rail must be decoupled close to the supply pins and the exposed pad must be tied to ground. Confirm the exact core and analog rail arrangement against the manufacturer datasheet before laying out a board, since per-rail current and sequencing details are not published in distributor summaries.
What package does the SI3241-D-GQ come in?
The SI3241-D-GQ is supplied in a 100-pin eTQFP (14 x 14 mm) package with an exposed pad, listed by distributors as 100-ETQFP (14x14) and by others as a QFN with exposed pad. The exposed pad is the thermal and ground connection for the device and must be solder-filled and tied to the ground plane, so the footprint, paste stencil and via-in-pad strategy all need to follow the manufacturer land pattern exactly.
What interfaces does the SI3241-D-GQ support?
The SI3241-D-GQ supports GCI, PCM and SPI host-side interfaces, as shown in the interface listing for the device. This combination is what makes the part usable across design generations: GCI and PCM suit traditional TDM telephony fabrics and RZ/PCM framing, while SPI suits lower-cost host processors and microcontroller-class gateways. Choose the interface your host processor natively supports to avoid gluing logic in software.
Where can I download the SI3241-D-GQ datasheet PDF?
The SI3241-D-GQ datasheet is published under the SI3241 family document, and the family PDF can be retrieved from the Silicon Labs SI3241 datasheet listing, with a published file dated 2013-05-21 of roughly 1.2 MB. The distributor product pages for SI3241-D-GQ link the same document. Because the ordering suffix -D-GQ selects a specific die revision and packaging, always confirm the revision letter and temperature grade inside the PDF before releasing a design to production.
Where do I find the SI3241-D-GQ pinout and land pattern?
The authoritative pin numbering and land pattern for the SI3241-D-GQ are in the manufacturer SI3241 datasheet, in the pin description table and the package drawing sections for the 100-pin eTQFP with exposed pad. Use those tables to assign the 100 pins and to define the exposed pad geometry and thermal vias on the PCB. Always work from the pin-description table when assigning PCB tracks, because the exposed pad numbering is what determines the land pattern stencil.
What is the difference between the SI3241-D-GQ and the SI3241-D-FQ?
The SI3241-D-FQ and the SI3241-D-GQ are both 100-pin eTQFP devices from the same SI3241 four-channel ProSLIC family, but the -F variant adds internal diagnostics that enable real-time monitoring of channel status, reducing troubleshooting time and improving network reliability. The -G variant carries the standard grade of the same silicon. Because both share the same package and pinout, the -D-FQ can be fitted as a drop-in alternative when the diagnostic features are wanted.
Is the SI3241-GQ the same as the SI3241-D-GQ?
The SI3241-GQ and the SI3241-D-GQ are two ordering codes from the same SI3241 four-channel, 63 dB, 3.3 V ProSLIC family in the same 100-pin eTQFP package, differing in die revision and grade suffix rather than in function or pinout. That makes the SI3241-GQ a pin-compatible alternative for the SI3241-D-GQ when supply and revision requirements permit, provided the specific grade and temperature coverage are checked against the datasheet for your end application.
When should I choose the SI3241-D-GQ over the SI3241-GQ?
Choose the SI3241-D-GQ when your design is qualified around the D die revision and the G grade, or when you need the specific ordering code already proven in your supply chain. Choose the SI3241-GQ when it is the revision your board and driver firmware have already been validated with, or when the -G ordering code offers better availability. Because both devices share the 100-pin eTQFP footprint and the same 3.3 V four-channel architecture, the decision is normally about revision maturity and sourcing rather than about electrical functionality.
What is the best drop-in replacement for the SI3241-D-GQ?
The closest drop-in replacements for the SI3241-D-GQ are the SI3241-D-FQ, which shares the same 100-pin eTQFP footprint and adds internal channel diagnostics, and the SI3241-GQ, which is the same family in the same package. The SI3241-D-GQR is the same die supplied in tape-and-reel packaging for automated assembly. No third-party manufacturer publishes a pin-compatible ProSLIC, so cross-brand substitution is not available for this function.
What competitor equivalent exists for the SI3241-D-GQ?
No cross-brand competitor equivalent is published for the SI3241-D-GQ. The ProSLIC family is a proprietary Silicon Labs and now Skyworks Solutions architecture, and no other manufacturer offers a register-compatible, pin-compatible four-channel SLIC and codec. The realistic migration path is within the SI3241 ordering codes, or moving the line interface to a discrete or DSP-based solution, which is a full redesign rather than a substitution. For any new design, verify current silicon availability before committing the layout.
Where can I buy the SI3241-D-GQ?
The SI3241-D-GQ is catalogued as a Skyworks Solutions Inc. telecom interface IC and is listed with multiple authorized channels, but current stock and pricing move quickly on this mature line. Use the Request a Quote form on this page for a current quote, lead time and quantity-break pricing for the exact -D-GQ ordering code, and specify whether you need tray or tape-and-reel packaging, because the -GQR code is the reel version of the same die.
What is the lead time for the SI3241-D-GQ?
Lead time for the SI3241-D-GQ varies with the ordering code, packaging and current channel inventory, so it is best confirmed against the live distributor listing rather than quoted from a catalog. Submit the Request a Quote form on this page with your required date code, quantity, packaging preference (tray or reel) and target delivery window, and the sourcing desk will confirm the current factory and distributor lead time in writing.
Is the SI3241-D-GQ in stock?
The SI3241-D-GQ is listed by several authorized distributors with live inventory, but stock depth for this mature ProSLIC part fluctuates and can be constrained by die revision. For a build quantity, request a confirmed availability and allocation through the Request a Quote form on this page, and specify whether the -D-GQ tray code is acceptable or the -D-GQR tape-and-reel code is required for your SMT line.
What are the key specifications of the SI3241-D-GQ that engineers should know?
The key specifications of the SI3241-D-GQ are: four integrated SLIC/codec voice channels, a 3.3 V supply, 63 dB channel gain, GCI/PCM/SPI host interfaces, and a 100-pin eTQFP (14 x 14 mm) package with an exposed pad supplied in tray packaging. The part is a programmable CMOS device, so line impedance, DC feed and filtering are register-configured rather than set by external networks. The exposed pad is mandatory for both thermal performance and the device ground return, and the -D-GQ suffix denotes die revision D, grade G, tray packaging.
What can replace the SI3241-D-GQ in an existing design?
The direct replacements for the SI3241-D-GQ are the SI3241-D-FQ (same 100-pin eTQFP footprint with added internal channel diagnostics) and the SI3241-GQ (same family, same package, different revision/grade code), both of which can be soldered onto the existing land pattern without PCB changes. The SI3241-D-GQR carries identical silicon in tape-and-reel packaging. If your board depends on the -F diagnostics, the -D-GQ is the part to move to rather than the reverse.

Datos de referencia de ingeniería para SI3241-D-GQ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SI3241-D-GQ when your design terminates four analog subscriber lines and needs a single 3.3 V IC with register-programmable line parameters and a choice of GCI, PCM or SPI host transport. It is the right part for VoIP terminal adapters, DSL and voice-over-PON gateways, digital loop carrier line cards and PBX trunk or extension modules. Choose the SI3241-D-FQ instead when real-time internal channel diagnostics are required for field maintenance, since it shares the identical footprint and adds monitoring features. Choose the SI3241-GQ when the board and its driver firmware were already qualified around that revision and grade code. Choose the SI3241-D-GQR for high-volume SMT lines that require tape-and-reel feeding of the same die. No cross-brand pin-compatible equivalent exists for this ProSLIC function, so if none of these ordering codes is available, plan a line-interface redesign rather than a substitution, and confirm current silicon availability before committing a layout.

Comparación con alternativas

Parámetro Este producto SI3241-D-FQ SI3241-GQ SI3241 SI3241-D-GQR
Package 100-pin eTQFP (14 x 14 mm) with exposed pad 100-pin eTQFP (14 x 14 mm) with exposed pad - same 100-pin eTQFP (14 x 14 mm) with exposed pad - same 100-pin eTQFP (14 x 14 mm) with exposed pad - same 100-pin eTQFP (14 x 14 mm) with exposed pad - same
Brand Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc. Skyworks Solutions Inc.
Number of Channels 4 4 4 4 4
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Product Type Telecom IC - Subscriber Line Interface Concept (SLIC) / Codec, programmable CMOS SLIC 4-CH 63dB 3.3V 100-Pin eTQFP SLIC 4-CH 63dB 3.3V 100-Pin eTQFP Quad ProSLIC programmable CMOS SLIC/Codec SLIC 4-CH 63dB 3.3V 100-Pin eTQFP

Diferenciadores clave

  • Four SLIC/codec channels integrated in one 3.3 V package (frente a SI3201-GSR)
  • Drop-in option with real-time channel diagnostics (frente a SI3241-D-FQ)
  • Multiple host-side transport options on the same silicon (frente a SI3241 base order code)
  • Packaging flexibility within the same footprint (frente a SI3241-D-GQR)

Notas de diseño

The 100-pin eTQFP exposes a thermal pad on the underside of the package, and that pad is both the primary heat path and the device ground return. Treat it as a mandatory connection: assign a full copper area under the pad, add thermal vias in a via-in-pad or tented pattern per the manufacturer land pattern, and tie the pad to the same ground plane as the ground pins. Leaving the pad unconnected removes the intended heat path and degrades the ground return of the line-side amplifiers, which shows up as noise and hum in the recovered voice signal rather than as an obvious thermal failure.

The line-side section of a ProSLIC is high-gain analog circuitry sitting next to a fast digital backplane, so keep the analog line traces short, avoid routing digital clock and PCM signals beneath the line-side pins, and keep the DC feed and sense resistors away from the digital return path. Place the 3.3 V decoupling capacitors at the supply pins on the same side of the board as the device, and follow the reference layout in the manufacturer datasheet for pin placement, pad geometry and the recommended paste stencil for the exposed pad. Layout to the datasheet land pattern rather than to a generic 100-pin TQFP library footprint.

Two ordering mistakes cause most field problems with this part. First, -GQ is the tray packing code while -GQR is the tape-and-reel code for the same silicon; a reel-fed SMT line that receives a tray-packed reel code will fail at placement. Second, the SI3241 family is register-configured, and a board that is populated with a different die revision or grade suffix than the one validated can change line behaviour, particularly DC feed and supervision thresholds. Record the exact ordering code, die revision and grade on the schematic BOM, and re-verify the line parameters after any substitution.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No compliance declarations are stated in the distributor listings for the SI3241-D-GQ. The part is a telecom interface IC rather than an automotive device, so AEC-Q100 qualification does not apply. Check the current manufacturer product page and the material declaration for the exact ordering code before committing to a production release.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

SI3241-D-GQ SI3241-D-GQ datasheet SI3241-D-GQ datasheet pdf SI3241-D-GQ pinout SI3241-D-GQ equivalent SI3241-D-GQ drop-in replacement SI3241-D-GQ vs SI3241-D-FQ SI3241-D-GQ 100 pin eTQFP package Skyworks SI3241-D-GQ 4 channel ProSLIC SI3241 quad ProSLIC SLIC codec 3.3V SI3241-D-GQ price and stock SI3241-D-GQ VoIP line card application SI3241-D-GQ footprint and land pattern SI3241 GCI PCM SPI interface SLIC what can replace SI3241-D-GQ

Componentes & términos relacionados

Skyworks Solutions Inc. SI3241-D-GQ SI3241-D-FQ SI3241-GQ SI3241-D-GQR SI3241 ProSLIC Subscriber Line Interface Circuit SLIC voice codec telecom interface IC line-side driver DC feed loop supervision GCI PCM SPI eTQFP exposed pad surface mount VoIP digital loop carrier analog line interface 3.3 V supply 63 dB gain register-programmable CMOS tray packaging tape and reel
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ