SP3232EBET-L/TR - 2/2 RS-232 Transceiver | MaxLinear
N.º de pieza: SP3232EBET-L/TR ✗ Fin de vidaSP3232EBET-L/TR Descripción general
An RS-232 transceiver is an interface IC that combines line drivers and receivers for communicating between computers, embedded controllers, instruments, and other equipment using the EIA/TIA-232-F physical layer. The SP3232EB belongs to the interface-IC hierarchy, combining RS-232 drivers and receivers with a charge-pump power supply. According to the MaxLinear product page, its high-efficiency charge-pump design permits true RS-232 operation from a single 3.3 V supply while using only 0.1 uF capacitors in 3.3 V operation.
The primary specifications include two drivers, two receivers, a 3 V to 5.5 V supply range, and a maximum transmission rate of 250 kbps under load. The series is intended to meet true EIA/TIA-232-F standards. Its two-driver, two-receiver arrangement supports full-duplex serial links where each direction can carry data independently, while its low-voltage supply operation simplifies integration with modern 3.3 V digital systems.
The SP3222EB and SP3232EB families use an on-chip charge-pump network to generate the positive and negative voltage levels required by RS-232. This approach eliminates a separate negative supply and reduces the number of external storage capacitors compared with older discrete RS-232 implementations. The SP3232EB configuration adds a second driver and receiver relative to the SP3222EB family, making it appropriate for links requiring two channels or a full-duplex interface.
Typical uses include portable computers and palmtop computers, serial-port adapters, industrial control interfaces, point-of-sale equipment, test and measurement instruments, and embedded systems that exchange data with RS-232 peripherals. In a typical design, the logic-side TXD and RXD pins connect to a microcontroller UART, while R1OUT and R2OUT drive the external RS-232 line through the required protection and signal-integrity network.
Designers should follow the manufacturer datasheet for the exact capacitor values, charge-pump connections, driver output levels, receiver thresholds, and layout guidance. Place the charge-pump capacitors close to their specified pins, maintain the required RS-232 line impedance, and validate both driver and receiver behavior over the full system voltage and temperature range. Because SP3232EBET-L/TR is listed as obsolete and no longer manufactured, production availability should be confirmed before committing a new design.
Alternativas directas para SP3232EBET-L/TR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ST3232EBWR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SP3232EBET-L/TR Especificaciones
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Transceiver Configuration | 2/2 full RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Transmission Rate | 250 kbps under load |
| Interface Standard | EIA/TIA-232-F |
| Encapsulado | 16-SOIC |
| Package Width | 7.50 mm |
| Package Body Width | 0.295 inch |
| Packaging | Tape and reel |
| Power Supply Architecture | High-efficiency charge-pump power supply |
| Charge-Pump Capacitor Value | 0.1 uF in 3.3 V operation |
| Single-Supply Operation | 3.3 V |
| Estado del ciclo de vida | Obsolete and no longer manufactured |
Guía de configuración de pines de SP3232EBET-L/TR 0.295 inch
Configuración de pines para SP3232EBET-L/TR (encapsulado 0.295 inch). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SP3232EBET-L/TR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SP3232EBET-L/TR es adecuado para 6 aplicacións: Portable Computer Serial Interface, Industrial Serial Control Interface, Point-of-Sale Equipment Interface, Test and Measurement Instrument, Embedded Controller Communication, Serial Port Adapter.
Portable Computer Serial Interface
The SP3232EBET-L/TR fits legacy RS-232 ports in portable and hand-held computers because its 3 V to 5.5 V supply range supports modern low-voltage system rails while the internal charge-pump creates the bipolar levels required by the RS-232 interface. The two-driver, two-receiver arrangement supports two communications channels or full-duplex traffic. At up to 250 kbps under load, it can serve both configuration links and higher-rate peripheral connections. The manufacturer identifies portable computers and palmtops as primary applications for the SP3222EB/SP3232EB family.
Recomendado
Industrial Serial Control Interface
The SP3232EBET-L/TR can connect a controller or test fixture to an RS-232 device when the system operates from a 3.3 V or 5 V rail. Its 2/2 driver-receiver configuration supports bidirectional command and response paths, while the 250 kbps under-load rating provides more bandwidth than a basic legacy UART port. The single-supply charge-pump implementation avoids requiring a separate negative rail. For new industrial equipment, verify the operating-temperature rating, ESD protection level, and current lifecycle status before adopting this obsolete ordering code.
Recomendado
Point-of-Sale Equipment Interface
Point-of-sale terminals and peripheral equipment often retain RS-232 connectors despite the prevalence of USB. The SP3232EBET-L/TR provides two drivers and two receivers for connecting a host UART to receipt printers, scanners, scales, or service interfaces. Its 3 V to 5.5 V operating range allows use with embedded 3.3 V logic, and the charge-pump output removes the need for an external negative supply. The 250 kbps under-load rate supports fast command exchanges, although cable capacitance and grounding must be checked for each installation.
Recomendado
Test and Measurement Instrument
The SP3232EBET-L/TR is suitable for RS-232 control and data connections in portable test and measurement equipment where a compact 16-SOIC interface and single-supply operation are valuable. Two channels can support separate transmit and receive paths or two instrument links, while the 250 kbps under-load specification accommodates instrument-control traffic. Use the manufacturer application guidance to select the required charge-pump capacitors, and place those capacitors close to the IC to minimize supply noise and ensure stable charge-pump operation.
Recomendado
Embedded Controller Communication
The SP3232EBET-L/TR bridges a 3.3 V microcontroller UART and a physical RS-232 network. The MCU connects to the transceiver through standard logic-side driver-input and receiver-output signals, while the external side connects to the line drivers and receiver inputs through the application network. A 3.3 V supply allows operation without a negative rail, and the 0.1 uF capacitor configuration identified for 3.3 V operation simplifies board design. Keep logic and RS-232 nets separated appropriately and include the required line protection.
Recomendado
Serial Port Adapter
A compact serial-port adapter can use the SP3232EBET-L/TR to add two RS-232 channels to a low-voltage embedded controller. Its 16-SOIC package provides a practical surface-mount implementation, and its 3 V to 5.5 V range covers common 3.3 V and 5 V designs. The two drivers and receivers permit simultaneous bidirectional operation, while the 250 kbps under-load rate supports higher-speed legacy links. Connector protection, ground continuity, cable length, and surge handling must be designed separately from the transceiver itself.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SP3232EBET-L/TR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ST3232EBWR |
|---|---|---|
| Package | 16-SOIC | 16-SOIC |
| Brand | MaxLinear, Inc. | STMicroelectronics |
Diferenciadores clave
- Documented two-channel RS-232 configuration (frente a ST3232EBWR)
- Single low-voltage supply operation (frente a ST3232EBWR)
- Explicit under-load throughput rating (frente a ST3232EBWR)
Notas de diseño
Place the charge-pump capacitors directly beside the pins and connections identified in the MaxLinear SP3232EB family datasheet. The manufacturer states that 0.1 uF capacitors support 3.3 V operation; use that value only with the corresponding application configuration. Short capacitor paths reduce loop area and switching-node coupling, which helps prevent charge-pump noise from disturbing the logic-side UART signals.
Do not treat SP3232EBET-L and SP3232EBET-L/TR as interchangeable lifecycle choices without checking the suffix. Both identify 2/2 full-RS-232 devices in 16-SOIC technology, but /TR specifies tape-and-reel packing, and the /TR listing explicitly states that the part is obsolete and no longer manufactured. For new production, qualify an available replacement against the complete pinout, supply range, timing, and thermal requirements.
Design the external RS-232 network separately from the transceiver logic connections. Use the manufacturer-recommended driver and receiver interface components, preserve the intended signal-return path, and account for connector protection, cable capacitance, and ground noise. The stated 250 kbps under-load rating does not guarantee end-to-end performance over an arbitrary cable; verify rise time, reflections, and receiver thresholds in the assembled system.
Información de cumplimiento
The manufacturer product page and distributor snippets do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code. AEC-Q100 qualification is not stated and is not applicable to the stated general-purpose RS-232 interface application.