MaxLinear

SP3232EBET-L/TR - 2/2 RS-232 Transceiver | MaxLinear

N.º da peça: SP3232EBET-L/TR ✗ Fim de vida
3 V to 5.5 V Vdss 16-SOIC Package
MOQ: 1 |

SP3232EBET-L/TR Visão geral

MaxLinear SP3232EBET-L/TR is a 2/2 full-duplex RS-232 transceiver designed for portable and hand-held equipment. It operates from a 3 V to 5.5 V supply, supports data rates up to 250 kbps under load, and is packaged in a 16-SOIC configuration. The tape-and-reel suffix, /TR, identifies the production packing format.

An RS-232 transceiver is an interface IC that combines line drivers and receivers for communicating between computers, embedded controllers, instruments, and other equipment using the EIA/TIA-232-F physical layer. The SP3232EB belongs to the interface-IC hierarchy, combining RS-232 drivers and receivers with a charge-pump power supply. According to the MaxLinear product page, its high-efficiency charge-pump design permits true RS-232 operation from a single 3.3 V supply while using only 0.1 uF capacitors in 3.3 V operation.

The primary specifications include two drivers, two receivers, a 3 V to 5.5 V supply range, and a maximum transmission rate of 250 kbps under load. The series is intended to meet true EIA/TIA-232-F standards. Its two-driver, two-receiver arrangement supports full-duplex serial links where each direction can carry data independently, while its low-voltage supply operation simplifies integration with modern 3.3 V digital systems.

The SP3222EB and SP3232EB families use an on-chip charge-pump network to generate the positive and negative voltage levels required by RS-232. This approach eliminates a separate negative supply and reduces the number of external storage capacitors compared with older discrete RS-232 implementations. The SP3232EB configuration adds a second driver and receiver relative to the SP3222EB family, making it appropriate for links requiring two channels or a full-duplex interface.

Typical uses include portable computers and palmtop computers, serial-port adapters, industrial control interfaces, point-of-sale equipment, test and measurement instruments, and embedded systems that exchange data with RS-232 peripherals. In a typical design, the logic-side TXD and RXD pins connect to a microcontroller UART, while R1OUT and R2OUT drive the external RS-232 line through the required protection and signal-integrity network.

Designers should follow the manufacturer datasheet for the exact capacitor values, charge-pump connections, driver output levels, receiver thresholds, and layout guidance. Place the charge-pump capacitors close to their specified pins, maintain the required RS-232 line impedance, and validate both driver and receiver behavior over the full system voltage and temperature range. Because SP3232EBET-L/TR is listed as obsolete and no longer manufactured, production availability should be confirmed before committing a new design.

Alternativas drop-in para SP3232EBET-L/TR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

ST3232EBWR

✅ Drop-In
📦 16-SOIC
Cross-brand 2/2 RS-232 candidate; supply current, data rate, temperature range, and exact pin mapping require comparison against the SP3232EBET-L/TR

📋 Alternativa de referência (fora do catálogo)

SP3232EBET-L/TR Especificações

Number of Drivers 2
Number of Receivers 2
Transceiver Configuration 2/2 full RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Transmission Rate 250 kbps under load
Interface Standard EIA/TIA-232-F
Encapsulamento 16-SOIC
Package Width 7.50 mm
Package Body Width 0.295 inch
Packaging Tape and reel
Power Supply Architecture High-efficiency charge-pump power supply
Charge-Pump Capacitor Value 0.1 uF in 3.3 V operation
Single-Supply Operation 3.3 V
Status do ciclo de vida Obsolete and no longer manufactured

Guia de Configuração de Pinos do SP3232EBET-L/TR 0.295 inch

Configuração de pinos para SP3232EBET-L/TR (pacote 0.295 inch). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 0.295 inch para SP3232EBET-L/TR

Nenhum dado detalhado de pinagem disponível para SP3232EBET-L/TR.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SP3232EBET-L/TR é adequado para 6 aplicaçãos: Portable Computer Serial Interface, Industrial Serial Control Interface, Point-of-Sale Equipment Interface, Test and Measurement Instrument, Embedded Controller Communication, Serial Port Adapter.

📱

Portable Computer Serial Interface

The SP3232EBET-L/TR fits legacy RS-232 ports in portable and hand-held computers because its 3 V to 5.5 V supply range supports modern low-voltage system rails while the internal charge-pump creates the bipolar levels required by the RS-232 interface. The two-driver, two-receiver arrangement supports two communications channels or full-duplex traffic. At up to 250 kbps under load, it can serve both configuration links and higher-rate peripheral connections. The manufacturer identifies portable computers and palmtops as primary applications for the SP3222EB/SP3232EB family.

🏭

Industrial Serial Control Interface

The SP3232EBET-L/TR can connect a controller or test fixture to an RS-232 device when the system operates from a 3.3 V or 5 V rail. Its 2/2 driver-receiver configuration supports bidirectional command and response paths, while the 250 kbps under-load rating provides more bandwidth than a basic legacy UART port. The single-supply charge-pump implementation avoids requiring a separate negative rail. For new industrial equipment, verify the operating-temperature rating, ESD protection level, and current lifecycle status before adopting this obsolete ordering code.

🖥️

Point-of-Sale Equipment Interface

Point-of-sale terminals and peripheral equipment often retain RS-232 connectors despite the prevalence of USB. The SP3232EBET-L/TR provides two drivers and two receivers for connecting a host UART to receipt printers, scanners, scales, or service interfaces. Its 3 V to 5.5 V operating range allows use with embedded 3.3 V logic, and the charge-pump output removes the need for an external negative supply. The 250 kbps under-load rate supports fast command exchanges, although cable capacitance and grounding must be checked for each installation.

🔧

Test and Measurement Instrument

The SP3232EBET-L/TR is suitable for RS-232 control and data connections in portable test and measurement equipment where a compact 16-SOIC interface and single-supply operation are valuable. Two channels can support separate transmit and receive paths or two instrument links, while the 250 kbps under-load specification accommodates instrument-control traffic. Use the manufacturer application guidance to select the required charge-pump capacitors, and place those capacitors close to the IC to minimize supply noise and ensure stable charge-pump operation.

🔧

Embedded Controller Communication

The SP3232EBET-L/TR bridges a 3.3 V microcontroller UART and a physical RS-232 network. The MCU connects to the transceiver through standard logic-side driver-input and receiver-output signals, while the external side connects to the line drivers and receiver inputs through the application network. A 3.3 V supply allows operation without a negative rail, and the 0.1 uF capacitor configuration identified for 3.3 V operation simplifies board design. Keep logic and RS-232 nets separated appropriately and include the required line protection.

🌐

Serial Port Adapter

A compact serial-port adapter can use the SP3232EBET-L/TR to add two RS-232 channels to a low-voltage embedded controller. Its 16-SOIC package provides a practical surface-mount implementation, and its 3 V to 5.5 V range covers common 3.3 V and 5 V designs. The two drivers and receivers permit simultaneous bidirectional operation, while the 250 kbps under-load rate supports higher-speed legacy links. Connector protection, ground continuity, cable length, and surge handling must be designed separately from the transceiver itself.

Resumo dos produtos recomendados

SP3232EBET-L/TR MaxLinear Usado em: Portable Computer Serial Interface, Industrial Serial Control Interface, Point-of-Sale Equipment Interface, Test and Measurement Instrument, Embedded Controller Communication, Serial Port Adapter SP3232EBET-L Same 2/2 16-SOIC transceiver without the /TR packing suffix Usado em: Portable Computer Serial Interface, Point-of-Sale Equipment Interface, Test and Measurement Instrument, Serial Port Adapter ST3232EBWR Cross-brand 16-SOIC replacement candidate Usado em: Industrial Serial Control Interface, Embedded Controller Communication
What is the SP3232EBET-L/TR?
The SP3232EBET-L/TR is a MaxLinear 2/2 full RS-232 transceiver with two drivers and two receivers in a 16-SOIC package. It operates from 3 V to 5.5 V and supports transmission rates up to 250 kbps under load. According to the MaxLinear SP3232EB product page, the device is designed for portable and hand-held equipment and uses an efficient charge-pump supply to provide true RS-232 operation from a single low-voltage supply.
What is the operating voltage of SP3232EBET-L/TR?
The SP3232EBET-L/TR operates from 3 V to 5.5 V. This range allows the interface to work directly from 3.3 V and 5 V system rails while generating the bipolar voltage levels required by RS-232 through its charge-pump circuitry. The MaxLinear product page specifically identifies 3.3 V single-supply operation with 0.1 uF charge-pump capacitors as a supported operating configuration.
How fast can SP3232EBET-L/TR transmit data?
The SP3232EBET-L/TR supports data rates up to 250 kbps under load. This makes the interface appropriate for serial links that exceed the throughput of conventional slower RS-232 implementations while remaining compatible with standard UART-based equipment. The 250 kbps under-load figure is identified in the component specifications, and system designers should still account for cable length, capacitance, grounding, and receiver load.
Where can I download the SP3232EBET-L/TR datasheet PDF?
The official SP3232EB documentation is available through the MaxLinear product page at https://www.maxlinear.com/product/interface/serial-transceivers/rs-232/sp3232eb?quality=1. The manufacturer page is the preferred source for the SP3222EB/SP3232EB family electrical characteristics, charge-pump capacitor requirements, RS-232 driver and receiver parameters, and application guidance. Use the family documentation for the SP3232EBET-L/TR ordering code.
Where can I find the SP3232EBET-L/TR pinout?
The SP3232EBET-L/TR pin assignment is defined in the SP3232EB family datasheet and package drawing on the MaxLinear product page. The device is a 16-SOIC package, but no complete manufacturer pin-number table appears in the retrieved product snippets. Use the pin-description table in the official family datasheet when assigning logic, charge-pump, receiver-output, and driver-output PCB nets; do not infer pin numbering from a generic RS-232 transceiver layout.
Is SP3232EBET-L/TR still manufactured?
No. The DigiKey product listing explicitly states that SP3232EBET-L/TR is obsolete and no longer manufactured. The MaxLinear family documentation remains useful for design and cross-reference purposes, but engineers should confirm lifecycle status, remaining inventory, and authorized sourcing before starting a production release. The Request a Quote form on this page can be used to ask about current availability.
What can replace SP3232EBET-L/TR?
The SP3232EBET-L/TR requires a pin-compatible 16-SOIC RS-232 transceiver with two drivers, two receivers, and suitable 3 V to 5.5 V operation. ST3232EBWR is a cross-brand candidate identified in the comparison search, but its electrical details and lifecycle status must be checked before approval. Request a Quote on this page for replacement sourcing, and verify pinout, supply voltage, driver slew rate, receiver thresholds, and package dimensions against the original design.
Is SP3232EBET-L/TR the same as SP3232EBET-L?
SP3232EBET-L/TR and SP3232EBET-L identify the same MaxLinear 2/2 RS-232 transceiver in 16-SOIC technology, with the /TR suffix identifying tape-and-reel packing. The distributor records list SP3232EBET-L and SP3232EBET-L/TR as 2/2 full-RS-232 16-SOIC devices. The /TR part is explicitly identified as obsolete, so lifecycle status and exact suffix qualification should be confirmed during procurement.
SP3232EBET-L/TR vs ST3232EBWR - which is better for a 3.3 V UART link?
The SP3232EBET-L/TR is the documented 2/2, 3 V to 5.5 V, 250 kbps-under-load device in a 16-SOIC package, while ST3232EBWR is a cross-brand comparison candidate. For a 3.3 V UART link, verify the replacement’s minimum supply voltage, charge-pump capacitor requirements, exact pin mapping, and operating temperature range. The original SP3232EBET-L/TR is listed as obsolete, so the replacement should qualify on a like-for-like basis before design approval.
When should I choose SP3232EBET-L/TR over a drop-in alternative?
Choose SP3232EBET-L/TR only when an existing design already uses its exact MaxLinear SP3232EB 2/2 interface and documentation, layout, or qualification history is important. The part provides 3 V to 5.5 V operation and up to 250 kbps under load in 16-SOIC. For new production, favor an available, qualified 16-SOIC replacement because the original ordering code is explicitly listed as obsolete and no longer manufactured.
Is SP3232EBET-L/TR suitable for industrial equipment?
SP3232EBET-L/TR is electrically suited to RS-232 interfaces operating from 3 V to 5.5 V, but industrial suitability depends on temperature range, ESD performance, qualification status, and long-term availability. The retrieved product information does not state the operating-temperature limits or AEC-Q100 status. Confirm those requirements in the manufacturer datasheet and select a currently manufactured replacement with appropriate industrial qualification for new designs.
How much power does SP3232EBET-L/TR need?
The SP3232EBET-L/TR requires a 3 V to 5.5 V supply and generates the bipolar RS-232 line levels with an internal charge-pump supply. The family documentation identifies 0.1 uF capacitors for 3.3 V operation, but the retrieved information does not state a complete supply-current table for every operating mode. Use the manufacturer datasheet for quiescent and loaded-current values, then verify power-loss behavior across the system’s voltage range.
What applications use the SP3232EBET-L/TR?
The SP3232EBET-L/TR is used for portable computers, palmtop computers, embedded serial interfaces, and other portable or hand-held equipment requiring two RS-232 driver and receiver channels. Its 3.3 V-compatible charge-pump architecture simplifies single-supply implementations. In an embedded controller design, the logic-side pins connect to a UART while the line-side drivers and receivers interface with an external RS-232 connector and its protection network.
What are the key specifications of SP3232EBET-L/TR that engineers should know?
The key SP3232EBET-L/TR specifications are two drivers, two receivers, a 3 V to 5.5 V supply range, 250 kbps maximum transmission rate under load, EIA/TIA-232-F operation, and a 16-SOIC package. The MaxLinear SP3232EB family also uses a high-efficiency charge-pump supply that requires only 0.1 uF capacitors in 3.3 V operation. Its tape-and-reel ordering suffix is /TR.
Where can I buy SP3232EBET-L/TR and what is its price?
The SP3232EBET-L/TR is listed as obsolete and no longer manufactured, so current market coverage may be limited. Use the Request a Quote form on this page for current availability, MOQ, and lead-time information rather than relying on a stale historical amount. For a new design, request a qualified 16-SOIC replacement and confirm pin-to-pin compatibility before ordering.

Dados de referência de engenharia para SP3232EBET-L/TR — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Use SP3232EBET-L/TR for continuity with an existing SP3232EB-based 16-SOIC design when its 3 V to 5.5 V supply range, two drivers, two receivers, and 250 kbps under-load performance already match the system. Do not select it for a new production program solely from its technical fit because the exact /TR ordering code is listed as obsolete and no longer manufactured. ST3232EBWR is a cross-brand 16-SOIC candidate, but it should be approved only after its pin mapping, supply range, data rate, driver and receiver counts, temperature limits, and lifecycle status are checked against the original circuit. For a new design, prioritize an available qualified part over maintaining an obsolete ordering code.

Comparação com alternativas

Parâmetro Este produto ST3232EBWR
Package 16-SOIC 16-SOIC
Brand MaxLinear, Inc. STMicroelectronics

Principais diferenciais

  • Documented two-channel RS-232 configuration (vs ST3232EBWR)
  • Single low-voltage supply operation (vs ST3232EBWR)
  • Explicit under-load throughput rating (vs ST3232EBWR)

Notas de projeto

Place the charge-pump capacitors directly beside the pins and connections identified in the MaxLinear SP3232EB family datasheet. The manufacturer states that 0.1 uF capacitors support 3.3 V operation; use that value only with the corresponding application configuration. Short capacitor paths reduce loop area and switching-node coupling, which helps prevent charge-pump noise from disturbing the logic-side UART signals.

Do not treat SP3232EBET-L and SP3232EBET-L/TR as interchangeable lifecycle choices without checking the suffix. Both identify 2/2 full-RS-232 devices in 16-SOIC technology, but /TR specifies tape-and-reel packing, and the /TR listing explicitly states that the part is obsolete and no longer manufactured. For new production, qualify an available replacement against the complete pinout, supply range, timing, and thermal requirements.

Design the external RS-232 network separately from the transceiver logic connections. Use the manufacturer-recommended driver and receiver interface components, preserve the intended signal-return path, and account for connector protection, cable capacitance, and ground noise. The stated 250 kbps under-load rating does not guarantee end-to-end performance over an arbitrary cable; verify rise time, reflections, and receiver thresholds in the assembled system.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page and distributor snippets do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code. AEC-Q100 qualification is not stated and is not applicable to the stated general-purpose RS-232 interface application.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SP3232EBET-L/TR SP3232EBET-L/TR datasheet SP3232EBET-L/TR datasheet pdf SP3232EBET-L/TR pinout SP3232EBET-L/TR equivalent SP3232EBET-L/TR replacement SP3232EBET-L/TR cross reference SP3232EBET-L/TR vs ST3232EBWR SP3232EBET-L/TR 16-SOIC SP3232EBET-L/TR price SP3232EBET-L/TR stock MaxLinear SP3232EBET-L/TR SP3232EBET-L/TR 3.3V RS-232 SP3232EBET-L/TR application circuit

Componentes & termos relacionados

MaxLinear, Inc. SP3232EBET-L/TR SP3232EBET-L SP3232EB SP3222EB ST3232EBWR STMicroelectronics RS-232 transceiver full-duplex transceiver interface IC line driver line receiver EIA/TIA-232-F charge-pump power supply single-supply operation 3.3 V operation 250 kbps transmission rate 16-SOIC package surface mount UART portable computer industrial control point-of-sale equipment test and measurement
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ