MaxLinear

SP3232EHET-L/TR - 3.3V 460kbps RS-232 | MaxLinear

N.º de pieza: SP3232EHET-L/TR ✓ Activo
3 V to 5.5 V Vdss 16-SOIC Package
MOQ: 1 |

SP3232EHET-L/TR Descripción general

MaxLinear SP3232EHET-L/TR is a 3.3V, 460kbps RS-232 transceiver containing two drivers and two receivers in a 16-SOIC package. The device operates from a 3V to 5.5V supply and supports RS-232 interoperability down to a 2.7V source. Enhanced human-body-model ESD protection of 15kV helps protect the serial interface when cables are connected to portable or hand-held equipment. The target is identified as a full RS-232, 2/2 transceiver and is packaged in the 16-SOIC format identified as 16-SOIC (0.295, 7.50mm width).

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts incoming RS-232 signals back into logic-compatible receiver outputs. The RS-232 transceiver category sits within serial interface ICs, interface ICs, and integrated circuits. It is commonly used to connect a host controller, embedded processor, test instrument, or industrial terminal to a longer-distance serial port where ground-referenced logic levels cannot drive the cable interface directly.

The SP3232EH family provides two transmit drivers and two receive channels, allowing one port to support bidirectional RS-232 communication. Operation from a 3V to 5.5V supply is useful in portable systems operating from a 3.3V rail, while the 460kbps signaling capability supports higher-speed serial links than legacy low-speed RS-232 implementations. Its enhanced 15kV human-body-model ESD rating is a notable protection feature for connector-facing circuits.

The architecture is optimized for portable and hand-held applications such as notebook and palmtop computers, where low supply voltage, compact packaging, and protection from electrostatic discharge are important. Because the device includes both directions of conversion, it can support two RS-232 lines without requiring separate driver and receiver ICs. The 16-SOIC package also provides a conventional surface-mount footprint compatible with automated assembly, although the exact pin assignment must be taken from the manufacturer pin-description table.

Typical applications include portable data-collection equipment, serial adapters, industrial service interfaces, diagnostic equipment, and embedded control systems that retain an RS-232 port. When one side of a cable is exposed to user contact or poorly controlled external wiring, the 15kV human-body-model ESD rating is especially relevant. Designers should still provide appropriate protection-network coordination and verify that the selected connector, cable, and grounding arrangement meet the system-level interface requirements.

The primary design consideration is power and signal integrity. Place the device close to the RS-232 connector so that board-trace exposure is minimized, connect the transceiver ground to the interface reference ground, and avoid long unprotected traces between the connector and IC. Confirm the 460kbps requirement against the actual cable length and noise environment because data rate, transmission distance, and capacitive loading are strongly related.

This product page consolidates the core electrical ratings, package information, interface use cases, verified drop-in candidates, comparison parameters, and practical layout guidance for faster component selection and PCB planning. Use the MaxLinear SP3232EH product page and manufacturer datasheet for the authoritative electrical characteristics, recommended application circuit, and exact pin configuration.

Alternativas directas para SP3232EHET-L/TR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con SP3232EHET-L/TR (mismo factor de forma y huella) — difiere en Supply Voltage Range, Package, Charge-Pump Capacitor Requirement, Data Rate, Interface Standard.

MaxLinear
Supply Voltage Range: 3.0V to 5.5V
Package: 16-pin SOIC
Charge-Pump Capacitor Requirement: 0.1µF at 3.3V operation
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
Charge-Pump Capacitor Requirement: 0.1 uF in 3.3 V operation
Data Rate: 120 kbps
STMicroelectronics
Supply Voltage Range: 3.0 V to 5.5 V
Package: SOIC-16
Data Rate: 400 kbps

SP3232EET-L/TR

✅ Sustitución directa
MaxLinear
📦 16-SOIC
RS-232 transceiver · 2 transmit / 2 receive channels · +3.0 V to +5.5 V · 120 kbps · 1 mA · -40 C to +85 C · 16-SOIC · RS-232 / EIA/TIA-232-F

Consulte el precio

Ver hoja de datos →

SP3232EBEN-L/TR

✅ Sustitución directa
MaxLinear
📦 16-SOIC
RS-232 transceiver interface IC · 2 channels · 2 channels · 3.0V to 5.5V · 250kbps · 0.3mA · -40°C to +85°C · 16-pin SOIC

Consulte el precio

Ver hoja de datos →

LT1281ACSW#PBF

✅ Sustitución directa
📦 16-SOIC
Both provide 2 drivers and 2 receivers in a 16-SOIC package; target operation is 3V to 5.5V with 15kV HBM, while alternate rating details require confirmation.

📋 Alternativa de referencia (no en el catálogo)

ST3232BDR

✅ Sustitución directa
STMicroelectronics
📦 16-SOIC
2 · 2 · 3.0 V to 5.5 V · 400 kbps · ±15 kV HBM · 10 kΩ · 1 µA · 0.1 µF

Consulte el precio

Ver hoja de datos →

SP3232EHET-L/TR Especificaciones

Transceiver Configuration 2 drivers / 2 receivers
Interface Standard EIA/TIA-232-F
Supply Voltage Range 3 V to 5.5 V
Minimum RS-232 Interoperability Supply 2.7 V
Maximum Data Rate 460 kbps
Number of Drivers 2
Number of Receivers 2
ESD Protection, Human Body Model 15 kV
Encapsulado 16-SOIC
Package Width 7.50 mm
Package Body Width 0.295 inch
Tipo de montaje Surface Mount
Packaging Tube

Guía de configuración de pines de SP3232EHET-L/TR 0.295 inch

Configuración de pines para SP3232EHET-L/TR (encapsulado 0.295 inch). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 0.295 inch para SP3232EHET-L/TR

No hay datos detallados de patillaje disponibles para SP3232EHET-L/TR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SP3232EHET-L/TR es adecuado para 6 aplicacións: Portable RS-232 Data Collection, Industrial Serial Service Interface, Legacy Serial Adapter, Serial Diagnostic Equipment, Embedded Controller RS-232 Port, Instrumentation and Test Equipment.

📱

Portable RS-232 Data Collection

The SP3232EHET-L/TR fits portable data-collection equipment that requires a wired RS-232 port while operating from a 3.3V system rail. Its two drivers and two receivers support bidirectional communication, while the 460kbps maximum rate accommodates compact protocols used with legacy peripherals. The 15kV human-body-model ESD protection is particularly valuable when the connector is exposed during field use. Place the transceiver close to the connector and use the device ground as the interface reference to minimize noise pickup on exposed traces.

🏭

Industrial Serial Service Interface

The SP3232EHET-L/TR can provide a robust service port on industrial test equipment, controllers, and diagnostic instruments. Two transmit drivers and two receive channels allow the equipment to exchange commands and status data with RS-232-compatible tools. Operation from 3V to 5.5V supports mixed-generation equipment, and the 460kbps rate provides useful protocol bandwidth. Confirm the device operating-temperature limit and the system ground strategy before deployment in an industrial enclosure.

🔧

Legacy Serial Adapter

The SP3232EHET-L/TR is suitable for a compact adapter that adds a legacy RS-232 port to a modern controller. Its 2/2 transceiver configuration supports both command transmission and response reception without requiring separate driver and receiver packages. The 3V minimum supply supports embedded 3.3V systems, while 5.5V compatibility covers conventional 5V designs. The 16-SOIC footprint simplifies assembly, although connector-side protection and board-level filtering should be designed around the maximum 460kbps signaling rate.

🧩

Serial Diagnostic Equipment

The SP3232EHET-L/TR can serve as the interface between a diagnostic instrument and a controller, modem, or service terminal. The two receiver channels are useful for systems that need more than one status or handshake input, while the two drivers support outbound command traffic. A 460kbps maximum data rate is suitable for many short-distance diagnostic protocols. For cable-connected equipment, maintain a common signal ground, minimize connector-to-IC routing, and verify that protocol timing remains reliable under the intended noise conditions.

🔧

Embedded Controller RS-232 Port

The SP3232EHET-L/TR allows an embedded controller to retain a wired RS-232 interface for configuration, programming, or field diagnostics. Its 3V to 5.5V operating range accommodates common embedded supply rails, and the compact 16-SOIC package supports board-space conservation. The transceiver converts digital controller signals to RS-232 levels and converts incoming line signals back to logic-compatible outputs. Place it near the connector and keep power and signal returns short to reduce susceptibility to external interference.

📺

Instrumentation and Test Equipment

The SP3232EHET-L/TR is applicable to instrumentation that exchanges RS-232 commands with external test fixtures or laboratory computers. Its two drivers and two receivers support full interface communication at rates up to 460kbps, while operation from 3V to 5.5V allows use in both portable and mains-powered instruments. The 15kV human-body-model ESD rating improves interface resilience, but engineers should still evaluate cable length, grounding, isolation, and external protection according to the complete test environment.

What is the SP3232EHET-L/TR?
The SP3232EHET-L/TR is a 3.3V-capable RS-232 transceiver IC with two drivers, two receivers, a maximum data rate of 460kbps, and a 16-SOIC package. According to the MaxLinear SP3232EH product page, the device is intended for portable and hand-held equipment such as notebook and palmtop computers. It is designed for systems using a 3V to 5.5V supply while maintaining RS-232 interoperability from a 2.7V source.
What are the key specifications of SP3232EHET-L/TR that engineers should know?
The SP3232EHET-L/TR combines two RS-232 drivers and two receivers, a 3V to 5.5V supply range, operation at up to 460kbps, and 15kV human-body-model ESD protection. According to the MaxLinear SP3232EH product page, the family is intended for portable and hand-held equipment. The 16-SOIC package provides a conventional surface-mount footprint, while the 2.7V interoperability point allows the interface to operate when the system supply approaches the lower end of the 3V operating range.
What is the operating voltage of SP3232EHET-L/TR?
The SP3232EHET-L/TR operates from 3V to 5.5V and remains interoperable with RS-232 down to a 2.7V source. According to the MaxLinear SP3232EH product page, this makes the device appropriate for 3.3V-powered portable and embedded systems. The 3V to 5.5V operating range is particularly useful in designs that must support both legacy 5V equipment and newer low-voltage portable platforms.
How fast is the SP3232EHET-L/TR RS-232 interface?
The SP3232EHET-L/TR supports RS-232 signaling at up to 460kbps. According to the MaxLinear SP3232EH product page, the device combines this rate with two drivers and two receivers for full-duplex-style serial communication. Actual sustainable throughput also depends on cable length, capacitance, grounding, noise, and the data-transfer protocol, so the 460kbps rating should be treated as the device limit rather than a guaranteed system-level distance specification.
What ESD protection does SP3232EHET-L/TR provide?
The SP3232EHET-L/TR provides enhanced ESD protection rated to 15kV under the human-body model. According to the MaxLinear SP3232EH documentation, this rating is relevant for portable equipment where an RS-232 connector may be exposed to electrostatic discharge. It protects the transceiver’s interface pins, but it does not replace a complete system-level ESD strategy involving connector design, cable retention, grounding, and external protection networks.
Where can I download the SP3232EHET-L/TR datasheet PDF?
The authoritative SP3232EH documentation is available through the MaxLinear SP3232EH product page linked on this page. According to MaxLinear, the SP3232EH is a 2-driver, 2-receiver RS-232 transceiver intended for portable and hand-held applications. The datasheet should be used for the exact pin description, electrical limits, recommended external components, and typical application diagram before the PCB is released for fabrication.
Where can I find the SP3232EHET-L/TR pinout?
Use the pin-description table and package drawing in the MaxLinear SP3232EH manufacturer documentation to identify all 16 pins. The SP3232EHET-L/TR uses a 16-SOIC package, but connector-side signal names must not be inferred solely from driver and receiver counts. Verify supply, ground, receiver outputs, driver inputs, enable functions, and any shutdown or charge-pump control pins against the exact datasheet revision used for the design.
What can replace the SP3232EHET-L/TR?
SP3232EET-L/TR and SP3232EBEN-L/TR are same-manufacturer 16-SOIC candidates identified for direct comparison with the SP3232EHET-L/TR. Cross-brand candidates include LT1281ACSW#PBF and ST3232BDR, but their exact electrical and ESD ratings must be checked before substitution. The strongest replacement requires more than a matching package: supply voltage, channel count, shutdown behavior, ESD rating, and pin-level function must all remain compatible.
Is SP3232EHET-L/TR pin compatible with SP3232EET-L/TR?
SP3232EET-L/TR is a same-family 16-SOIC candidate for the SP3232EHET-L/TR, with both devices identified as dual-transmitter, dual-receiver RS-232 transceivers. However, final interchangeability depends on the exact pin description and electrical limits in each manufacturer datasheet. According to MaxLinear’s SP3232EH documentation, the target operates from 3V to 5.5V, supports 460kbps, and provides 15kV human-body-model ESD protection; verify whether the replacement matches all three requirements.
What is the best MaxLinear equivalent for SP3232EHET-L/TR?
SP3232EET-L/TR is the closest same-manufacturer candidate identified for the SP3232EHET-L/TR because both are dual RS-232 transceivers in a 16-SOIC package. The choice remains conditional on matching pin functions and the target’s key ratings of 3V to 5.5V operation, 460kbps data rate, and 15kV human-body-model ESD protection. Use the individual MaxLinear datasheets to confirm those parameters before releasing a replacement into production.
What is the difference between SP3232EHET-L/TR and LT1281ACSW#PBF?
Both parts are identified as dual-transmitter, dual-receiver RS-232 transceivers in 16-SOIC packages, making LT1281ACSW#PBF a candidate for review. The SP3232EHET-L/TR is specified for 3V to 5.5V operation, up to 460kbps, and 15kV human-body-model ESD protection. Because equivalent channel counts and package dimensions do not prove pin compatibility, compare the LT1281ACSW#PBF datasheet against the SP3232EH pin description before selecting it.
When should I choose SP3232EHET-L/TR over SP3232EBEN-L/TR?
Choose the SP3232EHET-L/TR when the design requires its documented 3V to 5.5V supply range, 460kbps rate, and 15kV human-body-model ESD protection. SP3232EBEN-L/TR is a relevant 16-SOIC comparison candidate, but its shutdown, supply, and protection details must be compared directly. The preferred choice is the device whose complete pin function and electrical limits match the system without requiring PCB or firmware changes.
Is SP3232EHET-L/TR suitable for portable and industrial serial equipment?
The SP3232EHET-L/TR is suitable for portable and hand-held RS-232 equipment and can also serve industrial or service interfaces when its electrical and environmental limits meet the system requirements. According to the MaxLinear product page, its low-voltage operation, two-driver, two-receiver configuration, and 15kV human-body-model ESD protection support compact equipment with exposed serial connectors. Industrial use still requires verification of temperature range, isolation, grounding, and system EMC requirements.
Where can I buy SP3232EHET-L/TR and check its current price and lead time?
Use the Request a Quote form on this page to request the current SP3232EHET-L/TR price, stock status, quantity breaks, and production lead time. The visible structured pricing information is maintained separately because component pricing and availability change frequently. For design confirmation, specify the required quantity, packaging, delivery target, and destination so the supplier can return a current quotation for the exact SP3232EHET-L/TR order code.
What design considerations matter for an SP3232EHET-L/TR RS-232 port?
Place the SP3232EHET-L/TR close to the RS-232 connector, connect its ground reference to the interface ground, and minimize unprotected board traces between connector and transceiver. The 15kV human-body-model rating helps with electrostatic discharge at the IC, but the system still needs a sound connector, grounding, and protection-network strategy. Also confirm that cable length, capacitance, and noise remain compatible with the selected 460kbps operating rate.

Datos de referencia de ingeniería para SP3232EHET-L/TR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose SP3232EHET-L/TR for a 3.3V-powered portable or service device that needs two RS-232 drivers, two receivers, operation up to 460kbps, and 15kV human-body-model ESD protection. SP3232EET-L/TR is the closest same-manufacturer review candidate, but select it only after confirming its ESD, supply, shutdown, and pin-level ratings. SP3232EBEN-L/TR is useful when its datasheet provides a closer match for a specific control or protection requirement. LT1281ACSW#PBF and ST3232BDR merit evaluation for cross-brand sourcing, but their exact pin functions and electrical limits must align with the target before they can be treated as drop-in replacements. Because every candidate uses 16-SOIC, the package itself is not enough to approve a substitution.

Comparación con alternativas

Parámetro Este producto SP3232EET-L/TR SP3232EBEN-L/TR LT1281ACSW#PBF ST3232BDR
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand MaxLinear MaxLinear MaxLinear Linear Technology STMicroelectronics
Transceiver Configuration 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers
Surface-Mount Package Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins

Diferenciadores clave

  • Low-voltage RS-232 operation (frente a LT1281ACSW#PBF)
  • Specified enhanced ESD protection (frente a SP3232EBEN-L/TR)
  • High-speed 2/2 RS-232 channel configuration (frente a ST3232BDR)

Notas de diseño

Place the SP3232EHET-L/TR close to the RS-232 connector and minimize the distance from connector pins to the corresponding transceiver pins. Keep the interface ground continuous and return it to the transceiver ground without narrow breaks. Longer exposed traces can act as antennas and increase susceptibility to electrostatic discharge and external interference, particularly when the equipment is connected through an unprotected cable.

Do not assume that matching the 16-SOIC package proves drop-in compatibility. Before substituting SP3232EET-L/TR, SP3232EBEN-L/TR, LT1281ACSW#PBF, or ST3232BDR, compare every pin name, supply range, driver and receiver count, shutdown behavior, enable polarity, and ESD rating. The target is specified for 3V to 5.5V operation, 460kbps, and 15kV human-body-model ESD protection.

Confirm that the intended cable length, capacitance, grounding arrangement, and electromagnetic environment can support the selected signaling rate. The device supports rates up to 460kbps, but that value is not a guarantee of error-free communication over every cable or installation. Use the manufacturer application guidance to determine whether external filtering or protection components are needed at the connector.

Route the transceiver supply from a stable local rail and maintain the recommended bypass capacitance at the power pins. Provide a low-impedance ground path so driver current returns do not share a noisy path with receiver or controller ground. When power is sourced from a higher-voltage rail, include the required regulator rather than applying voltage beyond the documented 5.5V maximum.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The device is an RS-232 interface IC rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

SP3232EHET-L/TR datasheet SP3232EHET-L/TR datasheet pdf SP3232EHET-L/TR pinout SP3232EHET-L/TR specifications MaxLinear SP3232EHET-L/TR SP3232EHET-L/TR equivalent SP3232EHET-L/TR replacement SP3232EHET-L/TR vs SP3232EET-L/TR SP3232EHET-L/TR 16-SOIC footprint SP3232EHET-L/TR RS-232 460kbps SP3232EHET-L/TR portable equipment SP3232EHET-L/TR price SP3232EHET-L/TR stock SP3232EHET-L/TR lead time

Componentes & términos relacionados

MaxLinear SP3232EHET-L/TR SP3232EH SP3232EET-L/TR SP3232EBEN-L/TR LT1281ACSW#PBF ST3232BDR RS-232 transceiver RS-232 EIA/TIA-232-F serial interface IC interface IC integrated circuit semiconductor 2/2 transceiver line driver line receiver 460kbps 15kV human-body-model ESD 16-SOIC SOIC package family surface-mount package portable equipment industrial interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ