STM32F048G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
N.º de pieza: STM32F048G6U6 ✓ ActivoSTM32F048G6U6 Descripción general
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals and communication interfaces on one package. Within the embedded-system hierarchy, the STM32F048G6U6 is an ARM Cortex-M0 MCU, a 32-bit RISC microcontroller and a member of the STM32F0 product family. The Cortex-M0 architecture emphasizes low power consumption, simple instruction execution and deterministic behavior in cost-sensitive embedded control systems.
The principal specifications are a maximum CPU frequency of 48 MHz, 32 KB of Flash program memory and a 28-UFQFPN package measuring 4 x 4 mm. The listing identifies the device as a low-voltage part operating from 1.8 V. Its 32-bit processing architecture provides more computational headroom than an 8- or 16-bit MCU while retaining the simple programming model associated with the Cortex-M0 core.
The STM32F048G6U6 combines general-purpose embedded control with the peripheral integration expected from the STM32F0 family. Its small footprint reduces PCB area requirements, while the exposed-pad-style UFQFPN construction supports thermal dissipation when the operating conditions require it. Engineers should select input and output decoupling capacitors according to the manufacturer reference circuit and validate the power-management limits for the intended voltage and temperature range.
Typical applications include compact motor-control modules, low-cost industrial sensors, programmable logic controllers, communication equipment and small consumer appliances. The 48 MHz clock rate is useful for protocol handling, digital control loops and coordinating multiple peripheral functions. The 32 KB Flash capacity is appropriate for compact firmware that includes application logic, boot handling, communications and configuration storage.
A critical design consideration is the small 4 x 4 mm land pattern. Use the manufacturer pinout and footprint data to place all 28 package pins, connect the exposed thermal pad as directed and maintain adequate copper around the device for heat spreading. Confirm oscillator, debug, reset and communication connections against the application circuit before committing the PCB layout.
This product page combines manufacturer and distributor specifications, a package-level alternative comparison and practical PCB guidance. It also distinguishes genuine same-package STM32 family options from broader cross-brand MCU choices, helping engineers evaluate replacement risk without treating every Cortex-M0 product as a direct substitute.
Alternativas directas para STM32F048G6U6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
STM32F042G6U6
✅ Sustitución directaConsulte el precio
Ver hoja de datos →STM32F043G6U6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32F046G6U6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32F047G6U6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32F031G6U6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32F048G6U6 Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Core Architecture | ARM Cortex-M0 32-bit RISC |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| Operating Voltage | 1.8 V |
| Encapsulado | 28-pin UFQFPN |
| Package Dimensions | 4 x 4 mm |
| Tipo de montaje | Surface mount |
| Program Memory Type | Flash |
| CPU Bit Width | 32 bits |
Guía de configuración de pines de STM32F048G6U6 4 x 4 mm
Configuración de pines para STM32F048G6U6 (encapsulado 4 x 4 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32F048G6U6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32F048G6U6 es adecuado para 6 aplicacións: Industrial Sensor and Condition Monitoring, Compact Motor Control Module, Communication Gateway and Protocol Bridge, Low-Voltage Consumer Appliance Controller, Programmable Logic and Relay Controller, Compact IoT and Smart Home Node.
Industrial Sensor and Condition Monitoring
The STM32F048G6U6 fits compact industrial sensing modules that sample inputs, filter data and communicate measurements over a local bus. Its 32-bit ARM Cortex-M0 core operates at up to 48 MHz, providing enough throughput for sensor timing, digital filtering and protocol handling without requiring a larger package. The 32 KB of Flash supports compact application firmware, while the 28-pin UFQFPN 4 x 4 mm package preserves board area in distributed sensor nodes. Design the input front end for the required signal range, isolate analog and digital return paths, and confirm converter and communication peripheral assignments against the manufacturer datasheet.
Recomendado
Compact Motor Control Module
The STM32F048G6U6 can support a compact motor-control module when the application relies on general-purpose timers, GPIO and low-voltage operation. Its Cortex-M0 core runs at up to 48 MHz, allowing control calculations to coexist with position sensing and status communication, while 32 KB of Flash accommodates compact motor algorithms and calibration logic. The 4 x 4 mm UFQFPN package is useful when the controller must fit beside a driver or power stage. Validate pulse-width modulation channels, pin remapping, timer synchronization and thermal performance across motor current, supply voltage and ambient temperature before releasing the design.
Recomendado
Communication Gateway and Protocol Bridge
The STM32F048G6U6 is appropriate for small protocol bridges that translate between a host interface and a fieldbus or sensor network. Its 32-bit Cortex-M0 architecture and 48 MHz maximum operating frequency provide deterministic processing for packet handling, framing and status monitoring. The 32 KB Flash capacity is suitable for firmware focused on communication rather than a large graphical application. In the circuit, isolate noisy power and switching nodes from the MCU supply, follow the recommended decoupling arrangement and verify that every required UART, SPI, I2C or timer function is present on the required pins.
Recomendado
Low-Voltage Consumer Appliance Controller
The STM32F048G6U6 can control compact low-voltage appliances where a small PCB and simple real-time logic are priorities. Its 48 MHz Cortex-M0 core handles button logic, motor sequences, display updates and sensor-driven control, while the 1.8 V device classification supports integration with low-voltage power rails. The 28-pin UFQFPN 4 x 4 mm package allows the controller to sit close to the appliance mechanism and reduce interconnect length. Confirm regulator startup behavior, I/O levels, ADC accuracy and reset strategy for the target voltage range, and test all connector and actuator states during brownout conditions.
Recomendado
Programmable Logic and Relay Controller
The STM32F048G6U6 is suitable for compact programmable logic controllers that operate relays, indicators, interlocks and user inputs. A 32-bit Cortex-M0 core operating at up to 48 MHz can execute event logic and communication tasks while the 32 KB Flash provides room for configuration tables and application routines. The small 4 x 4 mm UFQFPN footprint helps reduce enclosure size, leaving more board area for relays and protection components. Keep inductive loads away from the MCU area, provide appropriate flyback paths, enforce isolation where required and test every output during reset, startup and fault recovery.
Recomendado
Compact IoT and Smart Home Node
The STM32F048G6U6 can act as the local control MCU in a compact IoT node that reads sensors, executes simple rules and forwards data to a wireless or wired companion module. Its 48 MHz 32-bit processing core handles protocol framing and control tasks, while the 32 KB Flash is appropriate for constrained embedded firmware. The 28-pin UFQFPN package reduces board size in wearables, room controllers and accessory modules. Select the communication companion according to the required protocol, expose only necessary debug signals in production and verify low-power wake behavior, antenna coupling and supply ripple across the complete wireless transmission cycle.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32F048G6U6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM32F042G6U6 | STM32F043G6U6 | STM32F046G6U6 | STM32F047G6U6 | STM32F031G6U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) |
| CPU Core | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz | 24 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 8 KB |
| Flash Organization | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 8K x 8 bits |
| Nominal Operating Voltage | 1.8 V | 1.8 V class | 1.8 V class | 1.8 V class | 1.8 V class | 1.8 V class |
Diferenciadores clave
- Higher clock ceiling than the STM32F042G6U6 family option (frente a STM32F042G6U6)
- Full 32 KB Flash without the STM32F031G6U6 memory reduction (frente a STM32F031G6U6)
- Compact 4 x 4 mm footprint with 32-bit processing (frente a STM32F043G6U6)
Notas de diseño
Use the manufacturer UFQFPN land pattern rather than a generic 28-pin QFN footprint. Confirm pad length, pad width, pitch, solder-mask opening and exposed-pad geometry against the package drawing. Place the MCU close to its decoupling capacitors, keep the thermal-pad path toward a solid ground plane, and avoid placing high-current switching nodes beneath the device.
Calculate the complete 1.8 V power budget from the MCU load, I/O drive current, external pull networks and the selected regulator efficiency. Use the manufacturer's recommended input and output capacitance and ESR or DC-bias limits. Check startup current, brownout behavior and regulator headroom rather than relying only on the nominal 48 MHz operating point.
Route debug, programming and clock signals away from noisy power converters and high-current outputs. Keep SWD programming access accessible, maintain a short ground return for each decoupling capacitor and follow the reference clock layout to limit electromagnetic pickup. If the design uses sensitive analog inputs, partition analog and digital sections and verify grounding under full switching load.
Do not assume that every STM32F0 device in the same package is functionally interchangeable. Validate the exact clock tree, Flash partition, ADC channels, timer outputs, communication mappings, bootloader behavior and GPIO alternate functions. After changing the MCU, repeat programming, boundary tests, brownout tests and peripheral timing checks before production release.
Información de cumplimiento
Compliance attributes were not stated on the manufacturer product page or distributor search results. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status with the manufacturer for the exact orderable MPN.