STM32F048G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
MPN: STM32F048G6U6 ✓ 啟用中STM32F048G6U6 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals and communication interfaces on one package. Within the embedded-system hierarchy, the STM32F048G6U6 is an ARM Cortex-M0 MCU, a 32-bit RISC microcontroller and a member of the STM32F0 product family. The Cortex-M0 architecture emphasizes low power consumption, simple instruction execution and deterministic behavior in cost-sensitive embedded control systems.
The principal specifications are a maximum CPU frequency of 48 MHz, 32 KB of Flash program memory and a 28-UFQFPN package measuring 4 x 4 mm. The listing identifies the device as a low-voltage part operating from 1.8 V. Its 32-bit processing architecture provides more computational headroom than an 8- or 16-bit MCU while retaining the simple programming model associated with the Cortex-M0 core.
The STM32F048G6U6 combines general-purpose embedded control with the peripheral integration expected from the STM32F0 family. Its small footprint reduces PCB area requirements, while the exposed-pad-style UFQFPN construction supports thermal dissipation when the operating conditions require it. Engineers should select input and output decoupling capacitors according to the manufacturer reference circuit and validate the power-management limits for the intended voltage and temperature range.
Typical applications include compact motor-control modules, low-cost industrial sensors, programmable logic controllers, communication equipment and small consumer appliances. The 48 MHz clock rate is useful for protocol handling, digital control loops and coordinating multiple peripheral functions. The 32 KB Flash capacity is appropriate for compact firmware that includes application logic, boot handling, communications and configuration storage.
A critical design consideration is the small 4 x 4 mm land pattern. Use the manufacturer pinout and footprint data to place all 28 package pins, connect the exposed thermal pad as directed and maintain adequate copper around the device for heat spreading. Confirm oscillator, debug, reset and communication connections against the application circuit before committing the PCB layout.
This product page combines manufacturer and distributor specifications, a package-level alternative comparison and practical PCB guidance. It also distinguishes genuine same-package STM32 family options from broader cross-brand MCU choices, helping engineers evaluate replacement risk without treating every Cortex-M0 product as a direct substitute.
直接替換替代品,適用於 STM32F048G6U6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
STM32F042G6U6
✅ 直接替換聯絡詢價
查看資料表 →STM32F043G6U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32F046G6U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32F047G6U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32F031G6U6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F048G6U6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Core Architecture | ARM Cortex-M0 32-bit RISC |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| Operating Voltage | 1.8 V |
| 封裝 | 28-pin UFQFPN |
| Package Dimensions | 4 x 4 mm |
| 安裝類型 | Surface mount |
| Program Memory Type | Flash |
| CPU Bit Width | 32 bits |
STM32F048G6U6 4 x 4 mm 腳位配置指南
STM32F048G6U6(4 x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F048G6U6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F048G6U6 適用於 6 應用s: Industrial Sensor and Condition Monitoring, Compact Motor Control Module, Communication Gateway and Protocol Bridge, Low-Voltage Consumer Appliance Controller, Programmable Logic and Relay Controller, Compact IoT and Smart Home Node.
Industrial Sensor and Condition Monitoring
The STM32F048G6U6 fits compact industrial sensing modules that sample inputs, filter data and communicate measurements over a local bus. Its 32-bit ARM Cortex-M0 core operates at up to 48 MHz, providing enough throughput for sensor timing, digital filtering and protocol handling without requiring a larger package. The 32 KB of Flash supports compact application firmware, while the 28-pin UFQFPN 4 x 4 mm package preserves board area in distributed sensor nodes. Design the input front end for the required signal range, isolate analog and digital return paths, and confirm converter and communication peripheral assignments against the manufacturer datasheet.
推薦
Compact Motor Control Module
The STM32F048G6U6 can support a compact motor-control module when the application relies on general-purpose timers, GPIO and low-voltage operation. Its Cortex-M0 core runs at up to 48 MHz, allowing control calculations to coexist with position sensing and status communication, while 32 KB of Flash accommodates compact motor algorithms and calibration logic. The 4 x 4 mm UFQFPN package is useful when the controller must fit beside a driver or power stage. Validate pulse-width modulation channels, pin remapping, timer synchronization and thermal performance across motor current, supply voltage and ambient temperature before releasing the design.
推薦
Communication Gateway and Protocol Bridge
The STM32F048G6U6 is appropriate for small protocol bridges that translate between a host interface and a fieldbus or sensor network. Its 32-bit Cortex-M0 architecture and 48 MHz maximum operating frequency provide deterministic processing for packet handling, framing and status monitoring. The 32 KB Flash capacity is suitable for firmware focused on communication rather than a large graphical application. In the circuit, isolate noisy power and switching nodes from the MCU supply, follow the recommended decoupling arrangement and verify that every required UART, SPI, I2C or timer function is present on the required pins.
推薦
Low-Voltage Consumer Appliance Controller
The STM32F048G6U6 can control compact low-voltage appliances where a small PCB and simple real-time logic are priorities. Its 48 MHz Cortex-M0 core handles button logic, motor sequences, display updates and sensor-driven control, while the 1.8 V device classification supports integration with low-voltage power rails. The 28-pin UFQFPN 4 x 4 mm package allows the controller to sit close to the appliance mechanism and reduce interconnect length. Confirm regulator startup behavior, I/O levels, ADC accuracy and reset strategy for the target voltage range, and test all connector and actuator states during brownout conditions.
推薦
Programmable Logic and Relay Controller
The STM32F048G6U6 is suitable for compact programmable logic controllers that operate relays, indicators, interlocks and user inputs. A 32-bit Cortex-M0 core operating at up to 48 MHz can execute event logic and communication tasks while the 32 KB Flash provides room for configuration tables and application routines. The small 4 x 4 mm UFQFPN footprint helps reduce enclosure size, leaving more board area for relays and protection components. Keep inductive loads away from the MCU area, provide appropriate flyback paths, enforce isolation where required and test every output during reset, startup and fault recovery.
推薦
Compact IoT and Smart Home Node
The STM32F048G6U6 can act as the local control MCU in a compact IoT node that reads sensors, executes simple rules and forwards data to a wireless or wired companion module. Its 48 MHz 32-bit processing core handles protocol framing and control tasks, while the 32 KB Flash is appropriate for constrained embedded firmware. The 28-pin UFQFPN package reduces board size in wearables, room controllers and accessory modules. Select the communication companion according to the required protocol, expose only necessary debug signals in production and verify low-power wake behavior, antenna coupling and supply ripple across the complete wireless transmission cycle.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F048G6U6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F042G6U6 | STM32F043G6U6 | STM32F046G6U6 | STM32F047G6U6 | STM32F031G6U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) | 28-UFQFPN (4x4 mm) |
| CPU Core | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz | 24 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 8 KB |
| Flash Organization | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 8K x 8 bits |
| Nominal Operating Voltage | 1.8 V | 1.8 V class | 1.8 V class | 1.8 V class | 1.8 V class | 1.8 V class |
主要差異化特點
- Higher clock ceiling than the STM32F042G6U6 family option (對比STM32F042G6U6)
- Full 32 KB Flash without the STM32F031G6U6 memory reduction (對比STM32F031G6U6)
- Compact 4 x 4 mm footprint with 32-bit processing (對比STM32F043G6U6)
設計說明
Use the manufacturer UFQFPN land pattern rather than a generic 28-pin QFN footprint. Confirm pad length, pad width, pitch, solder-mask opening and exposed-pad geometry against the package drawing. Place the MCU close to its decoupling capacitors, keep the thermal-pad path toward a solid ground plane, and avoid placing high-current switching nodes beneath the device.
Calculate the complete 1.8 V power budget from the MCU load, I/O drive current, external pull networks and the selected regulator efficiency. Use the manufacturer's recommended input and output capacitance and ESR or DC-bias limits. Check startup current, brownout behavior and regulator headroom rather than relying only on the nominal 48 MHz operating point.
Route debug, programming and clock signals away from noisy power converters and high-current outputs. Keep SWD programming access accessible, maintain a short ground return for each decoupling capacitor and follow the reference clock layout to limit electromagnetic pickup. If the design uses sensitive analog inputs, partition analog and digital sections and verify grounding under full switching load.
Do not assume that every STM32F0 device in the same package is functionally interchangeable. Validate the exact clock tree, Flash partition, ADC channels, timer outputs, communication mappings, bootloader behavior and GPIO alternate functions. After changing the MCU, repeat programming, boundary tests, brownout tests and peripheral timing checks before production release.
合規資訊
Compliance attributes were not stated on the manufacturer product page or distributor search results. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status with the manufacturer for the exact orderable MPN.