STM32G031K8U7TR - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
N.º de pieza: STM32G031K8U7TR ✓ ActivoSTM32G031K8U7TR Descripción general
A microcontroller is a programmable semiconductor device that combines a CPU core, memory, and peripherals on one integrated circuit. The STM32G0 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its Arm Cortex-M0+ core provides a compact instruction set and deterministic real-time performance for consumer, industrial, and communications equipment.
The STM32G031K8U7TR provides up to 64 KB of Flash memory with protection and a securable area, along with 8 KB of SRAM with hardware parity checking. The listed operating-temperature options include -40°C to 85°C, -40°C to 105°C, and -40°C to 125°C, depending on the specific ordering configuration. The manufacturer datasheet identifies a 1.7 V to 3.6 V operating supply range.
The STM32G031x4, x6, and x8 mainstream devices use a high-performance Arm Cortex-M0+ 32-bit RISC core with a maximum operating frequency of 64 MHz. Their integration supports applications that need a small footprint without the overhead of a higher-performance Cortex-M processor. The 32-pin UFQFPN package also exposes the device's supply, ground, reset, clock, and peripheral connections in a compact land pattern.
Typical uses include low-cost sensor nodes, compact motor controllers, industrial monitoring equipment, consumer accessories, and connected control modules. The combination of 64 MHz processing, 64 KB Flash, and 8 KB SRAM is useful for protocol handling, state-machine control, data acquisition, and human-interface logic.
Designers should preserve the exposed-pad thermal and electrical connection, follow the manufacturer's decoupling recommendations, and use the package pin table when assigning PCB nets. The STM32G031K8U7TR datasheet is the authoritative reference for pin names, alternate functions, absolute maximum ratings, and peripheral characteristics.
This product page organizes the manufacturer specifications, sourcing information, practical design guidance, and same-footprint replacement context for engineers evaluating the STM32G031K8U7TR.
Alternativas directas para STM32G031K8U7TR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM32G031K8U7TR (mismo factor de forma y huella) — difiere en Flash Memory, Operating Temperature Options.
STM32G031K8U6TR
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32G031K8U6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32G031K8U7TR Valores máximos y características eléctricas
| Core | Arm Cortex-M0+, 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 8 KB |
| SRAM Protection | Hardware parity check |
| Flash Protection | Protection and securable area |
| Tensión de alimentación de funcionamiento | 1.7 V to 3.6 V |
| Operating Temperature Options | -40°C to 85°C, -40°C to 105°C, or -40°C to 125°C |
| Encapsulado | 32-pin UFQFPN, 5 x 5 mm |
| Architecture | 32-bit RISC |
| Product Series | STM32G0 mainstream |
| Core Supply | Internal VCORE supply generated by an embedded linear voltage regulator |
Guía de configuración de pines de STM32G031K8U7TR 32-pin ufqfpn, 5 x 5 mm
Configuración de pines para STM32G031K8U7TR (encapsulado 32-pin ufqfpn, 5 x 5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32G031K8U7TR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32G031K8U7TR es adecuado para 6 aplicacións: Industrial Sensor Node, Compact Motor Control, Consumer Interface Controller, Battery-Powered Data Logger, LED Lighting Controller, Secure Connected Control Module.
Industrial Sensor Node
The STM32G031K8U7TR fits compact industrial sensor nodes that acquire measurements, apply filtering, and communicate status over a serial interface. Its 64 MHz Arm Cortex-M0+ core provides deterministic control performance, while 64 KB Flash and 8 KB SRAM accommodate drivers, acquisition logic, and protocol state. The 1.7 V to 3.6 V supply range supports low-voltage sensor systems. Place the device on a compact 5 x 5 mm UFQFPN land pattern and follow the datasheet decoupling and exposed-pad guidance. Confirm the selected temperature grade against the installation environment before production release.
Recomendado
Compact Motor Control
The STM32G031K8U7TR is appropriate for small brushed-motor or stepper-control modules where the controller must combine timing functions, communication, and protection logic in a limited footprint. The 64 MHz Cortex-M0+ core can execute motion algorithms and monitor position inputs, while 8 KB of SRAM supports working control state. Its 32-pin UFQFPN package leaves board area for power conversion and driver circuitry. Use the manufacturer pin table to map timer outputs, PWM functions, and debug signals, and preserve the exposed-pad thermal connection to maintain reliable operation at elevated ambient temperatures.
Recomendado
Consumer Interface Controller
The STM32G031K8U7TR can serve as the central controller in compact consumer accessories that combine buttons, indicators, sensors, and a serial host interface. Its 64 KB Flash supports application firmware and boot logic, while 8 KB SRAM is adequate for protocol buffers and user-interface state. The 64 MHz core improves responsiveness for debouncing, display updates, and communication tasks. The low-voltage 1.7 V to 3.6 V operating range simplifies integration with portable power systems. Validate accessory timing and peripheral assignments against the manufacturer datasheet rather than assuming compatibility with other STM32G0 packages.
Recomendado
Battery-Powered Data Logger
The STM32G031K8U7TR is suitable for a battery-powered environmental logger that periodically samples sensors, records results, and transfers data through a low-power serial link. Its Cortex-M0+ core provides efficient computation without requiring a higher-performance MCU, and 64 KB Flash accommodates firmware, calibration data, and compact logs. The 8 KB SRAM provides working space for acquisition and packet assembly. Use the datasheet's power modes and wakeup behavior to build the duty cycle, and route the 1.7 V to 3.6 V supply through a regulator capable of meeting transient and quiescent-current requirements for the complete logger.
Recomendado
LED Lighting Controller
The STM32G031K8U7TR can drive intelligent LED lighting modules that require timed fading, status indication, and communication with a master controller. The 64 MHz core provides sufficient timing resolution for PWM generation, effects processing, and input handling, while the 5 x 5 mm UFQFPN footprint supports compact lamp electronics. The 32-pin package offers dedicated digital and timer resources, subject to the exact alternate-function mapping in the datasheet. Design the layout so switching-driver power stages remain separated from sensitive control traces, and use the exposed-pad implementation specified by STMicroelectronics for electrical and thermal performance.
Recomendado
Secure Connected Control Module
The STM32G031K8U7TR fits connected control modules that need a protected code area, firmware update capability, and machine-to-machine communications. Its 64 KB Flash includes protection and a securable area, and the 8 KB SRAM includes hardware parity checking for improved integrity. The Cortex-M0+ core handles protocol framing, local control, and diagnostic logic in a compact package. Design the boot and debug strategy around the manufacturer pin configuration, and use the secure-area features according to the application note and reference manual guidance. Supply filtering and exposed-pad implementation must follow the manufacturer recommendations.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32G031K8U7TR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM32G031K8U6TR | STM32G031K8U6 |
|---|---|---|---|
| Package | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB |
| Operating Supply Voltage | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| Core Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Ordering Suffix | U7TR | U6TR | U6 |
Diferenciadores clave
- Exact package-family option with the same listed core and memory ratings (frente a STM32G031K8U6TR)
- Base ordering-code availability within the same device family (frente a STM32G031K8U6)
- Specific suffix selection preserves the intended manufacturer ordering configuration (frente a STM32G031K8U6TR)
Notas de diseño
Follow the STMicroelectronics 32-pin UFQFPN land-pattern and exposed-pad guidance exactly. Connect the exposed pad to the appropriate ground or supply arrangement specified in the datasheet, provide adequate thermal copper, and confirm the paste stencil and reflow profile during board qualification. Generic QFN layouts may not reproduce the manufacturer-recommended thermal and electrical construction.
Build the 1.7 V to 3.6 V supply rail so that the MCU sees no voltage outside the datasheet operating range, including startup and transient conditions. Place the recommended bypass capacitors close to their associated supply pins and use a low-noise source for sensitive analog measurements. Review the embedded linear regulator and VCORE arrangement in the manufacturer datasheet before selecting external power components.
Do not assume that all STM32G0 devices are interchangeable because memory density, package pin count, exposed-pad connections, alternate functions, and ordering suffixes can change the pinout. For a board replacement, compare the target and candidate package drawings and pin-description tables, then verify boot, debug, oscillator, and peripheral connections. Firmware should also be regression-tested on the exact ordering code.
Información de cumplimiento
The retrieved manufacturer and distributor information does not state the requested compliance statuses. Verify declarations for the exact ordering code with the manufacturer before regulatory submission.