STM32G031K8U7TR - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
부품 번호: STM32G031K8U7TR ✓ 활성STM32G031K8U7TR 개요
A microcontroller is a programmable semiconductor device that combines a CPU core, memory, and peripherals on one integrated circuit. The STM32G0 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its Arm Cortex-M0+ core provides a compact instruction set and deterministic real-time performance for consumer, industrial, and communications equipment.
The STM32G031K8U7TR provides up to 64 KB of Flash memory with protection and a securable area, along with 8 KB of SRAM with hardware parity checking. The listed operating-temperature options include -40°C to 85°C, -40°C to 105°C, and -40°C to 125°C, depending on the specific ordering configuration. The manufacturer datasheet identifies a 1.7 V to 3.6 V operating supply range.
The STM32G031x4, x6, and x8 mainstream devices use a high-performance Arm Cortex-M0+ 32-bit RISC core with a maximum operating frequency of 64 MHz. Their integration supports applications that need a small footprint without the overhead of a higher-performance Cortex-M processor. The 32-pin UFQFPN package also exposes the device's supply, ground, reset, clock, and peripheral connections in a compact land pattern.
Typical uses include low-cost sensor nodes, compact motor controllers, industrial monitoring equipment, consumer accessories, and connected control modules. The combination of 64 MHz processing, 64 KB Flash, and 8 KB SRAM is useful for protocol handling, state-machine control, data acquisition, and human-interface logic.
Designers should preserve the exposed-pad thermal and electrical connection, follow the manufacturer's decoupling recommendations, and use the package pin table when assigning PCB nets. The STM32G031K8U7TR datasheet is the authoritative reference for pin names, alternate functions, absolute maximum ratings, and peripheral characteristics.
This product page organizes the manufacturer specifications, sourcing information, practical design guidance, and same-footprint replacement context for engineers evaluating the STM32G031K8U7TR.
드롭인 대체품: STM32G031K8U7TR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32G031K8U7TR (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Operating Temperature Options.
STM32G031K8U6TR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32G031K8U6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32G031K8U7TR 최대 정격 & 전기적 특성
| Core | Arm Cortex-M0+, 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 8 KB |
| SRAM Protection | Hardware parity check |
| Flash Protection | Protection and securable area |
| 동작 공급 전압 | 1.7 V to 3.6 V |
| Operating Temperature Options | -40°C to 85°C, -40°C to 105°C, or -40°C to 125°C |
| 패키지 | 32-pin UFQFPN, 5 x 5 mm |
| Architecture | 32-bit RISC |
| Product Series | STM32G0 mainstream |
| Core Supply | Internal VCORE supply generated by an embedded linear voltage regulator |
STM32G031K8U7TR 32-pin ufqfpn, 5 x 5 mm 핀 구성 가이드
STM32G031K8U7TR(32-pin ufqfpn, 5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32G031K8U7TR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32G031K8U7TR 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Compact Motor Control, Consumer Interface Controller, Battery-Powered Data Logger, LED Lighting Controller, Secure Connected Control Module.
Industrial Sensor Node
The STM32G031K8U7TR fits compact industrial sensor nodes that acquire measurements, apply filtering, and communicate status over a serial interface. Its 64 MHz Arm Cortex-M0+ core provides deterministic control performance, while 64 KB Flash and 8 KB SRAM accommodate drivers, acquisition logic, and protocol state. The 1.7 V to 3.6 V supply range supports low-voltage sensor systems. Place the device on a compact 5 x 5 mm UFQFPN land pattern and follow the datasheet decoupling and exposed-pad guidance. Confirm the selected temperature grade against the installation environment before production release.
추천
Compact Motor Control
The STM32G031K8U7TR is appropriate for small brushed-motor or stepper-control modules where the controller must combine timing functions, communication, and protection logic in a limited footprint. The 64 MHz Cortex-M0+ core can execute motion algorithms and monitor position inputs, while 8 KB of SRAM supports working control state. Its 32-pin UFQFPN package leaves board area for power conversion and driver circuitry. Use the manufacturer pin table to map timer outputs, PWM functions, and debug signals, and preserve the exposed-pad thermal connection to maintain reliable operation at elevated ambient temperatures.
추천
Consumer Interface Controller
The STM32G031K8U7TR can serve as the central controller in compact consumer accessories that combine buttons, indicators, sensors, and a serial host interface. Its 64 KB Flash supports application firmware and boot logic, while 8 KB SRAM is adequate for protocol buffers and user-interface state. The 64 MHz core improves responsiveness for debouncing, display updates, and communication tasks. The low-voltage 1.7 V to 3.6 V operating range simplifies integration with portable power systems. Validate accessory timing and peripheral assignments against the manufacturer datasheet rather than assuming compatibility with other STM32G0 packages.
추천
Battery-Powered Data Logger
The STM32G031K8U7TR is suitable for a battery-powered environmental logger that periodically samples sensors, records results, and transfers data through a low-power serial link. Its Cortex-M0+ core provides efficient computation without requiring a higher-performance MCU, and 64 KB Flash accommodates firmware, calibration data, and compact logs. The 8 KB SRAM provides working space for acquisition and packet assembly. Use the datasheet's power modes and wakeup behavior to build the duty cycle, and route the 1.7 V to 3.6 V supply through a regulator capable of meeting transient and quiescent-current requirements for the complete logger.
추천
LED Lighting Controller
The STM32G031K8U7TR can drive intelligent LED lighting modules that require timed fading, status indication, and communication with a master controller. The 64 MHz core provides sufficient timing resolution for PWM generation, effects processing, and input handling, while the 5 x 5 mm UFQFPN footprint supports compact lamp electronics. The 32-pin package offers dedicated digital and timer resources, subject to the exact alternate-function mapping in the datasheet. Design the layout so switching-driver power stages remain separated from sensitive control traces, and use the exposed-pad implementation specified by STMicroelectronics for electrical and thermal performance.
추천
Secure Connected Control Module
The STM32G031K8U7TR fits connected control modules that need a protected code area, firmware update capability, and machine-to-machine communications. Its 64 KB Flash includes protection and a securable area, and the 8 KB SRAM includes hardware parity checking for improved integrity. The Cortex-M0+ core handles protocol framing, local control, and diagnostic logic in a compact package. Design the boot and debug strategy around the manufacturer pin configuration, and use the secure-area features according to the application note and reference manual guidance. Supply filtering and exposed-pad implementation must follow the manufacturer recommendations.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32G031K8U7TR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32G031K8U6TR | STM32G031K8U6 |
|---|---|---|---|
| Package | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) | 32-pin UFQFPN (5 x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB |
| Operating Supply Voltage | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| Core Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Ordering Suffix | U7TR | U6TR | U6 |
주요 차별점
- Exact package-family option with the same listed core and memory ratings (vs STM32G031K8U6TR)
- Base ordering-code availability within the same device family (vs STM32G031K8U6)
- Specific suffix selection preserves the intended manufacturer ordering configuration (vs STM32G031K8U6TR)
설계 노트
Follow the STMicroelectronics 32-pin UFQFPN land-pattern and exposed-pad guidance exactly. Connect the exposed pad to the appropriate ground or supply arrangement specified in the datasheet, provide adequate thermal copper, and confirm the paste stencil and reflow profile during board qualification. Generic QFN layouts may not reproduce the manufacturer-recommended thermal and electrical construction.
Build the 1.7 V to 3.6 V supply rail so that the MCU sees no voltage outside the datasheet operating range, including startup and transient conditions. Place the recommended bypass capacitors close to their associated supply pins and use a low-noise source for sensitive analog measurements. Review the embedded linear regulator and VCORE arrangement in the manufacturer datasheet before selecting external power components.
Do not assume that all STM32G0 devices are interchangeable because memory density, package pin count, exposed-pad connections, alternate functions, and ordering suffixes can change the pinout. For a board replacement, compare the target and candidate package drawings and pin-description tables, then verify boot, debug, oscillator, and peripheral connections. Firmware should also be regression-tested on the exact ordering code.
규정 준수 정보
The retrieved manufacturer and distributor information does not state the requested compliance statuses. Verify declarations for the exact ordering code with the manufacturer before regulatory submission.