STMicroelectronics

STM32G031K8U7TR - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

MPN: STM32G031K8U7TR ✓ Hoạt động
1.7 V to 3.6 V Vdss 32-pin UFQFPN, 5 x 5 mm Package 64 MHz Speed 64 KB Memory
MOQ: 1 |

STM32G031K8U7TR Tóm tắt

STMicroelectronics STM32G031K8U7TR is a 32-bit Arm Cortex-M0+ STM32G0 series microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 8 KB of SRAM in a 32-pin UFQFPN package measuring 5 x 5 mm. It is designed for compact, low-power embedded systems that require efficient control processing, digital peripherals, and flexible serial connectivity.

A microcontroller is a programmable semiconductor device that combines a CPU core, memory, and peripherals on one integrated circuit. The STM32G0 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its Arm Cortex-M0+ core provides a compact instruction set and deterministic real-time performance for consumer, industrial, and communications equipment.

The STM32G031K8U7TR provides up to 64 KB of Flash memory with protection and a securable area, along with 8 KB of SRAM with hardware parity checking. The listed operating-temperature options include -40°C to 85°C, -40°C to 105°C, and -40°C to 125°C, depending on the specific ordering configuration. The manufacturer datasheet identifies a 1.7 V to 3.6 V operating supply range.

The STM32G031x4, x6, and x8 mainstream devices use a high-performance Arm Cortex-M0+ 32-bit RISC core with a maximum operating frequency of 64 MHz. Their integration supports applications that need a small footprint without the overhead of a higher-performance Cortex-M processor. The 32-pin UFQFPN package also exposes the device's supply, ground, reset, clock, and peripheral connections in a compact land pattern.

Typical uses include low-cost sensor nodes, compact motor controllers, industrial monitoring equipment, consumer accessories, and connected control modules. The combination of 64 MHz processing, 64 KB Flash, and 8 KB SRAM is useful for protocol handling, state-machine control, data acquisition, and human-interface logic.

Designers should preserve the exposed-pad thermal and electrical connection, follow the manufacturer's decoupling recommendations, and use the package pin table when assigning PCB nets. The STM32G031K8U7TR datasheet is the authoritative reference for pin names, alternate functions, absolute maximum ratings, and peripheral characteristics.

This product page organizes the manufacturer specifications, sourcing information, practical design guidance, and same-footprint replacement context for engineers evaluating the STM32G031K8U7TR.

Bộ thay thế dễ dàng lắp đặt cho STM32G031K8U7TR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32G031K8U7TR (cùng hình factor và footprint) — khác nhau ở Flash Memory, Operating Temperature Options.

STMicroelectronics
Flash Memory: 64 KB (64K x 8 bits)
Operating Temperature Options: -40C to 85C, 105C, or 125C, depending on device variant
So sánh với STM32G031K8U7TR →

STM32G031K8U6TR

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 32-pin UFQFPN (5 x 5 mm)
Same STM32G031K8 family and 32-pin UFQFPN footprint; ordering-code temperature or grade details differ by 0% in the core parameters listed for this device.

📋 Tham chiếu thay thế (không có trong danh mục)

STM32G031K8U6

✅ Drop-In ⚠️ Thông số chưa được xác minh
STMicroelectronics
📦 32-pin UFQFPN (5 x 5 mm)
Arm Cortex-M0+ 32-bit microcontroller · STM32G0 · 64 MHz · 32-bit Arm Cortex-M0+ · 64 KB (64K x 8 bits) · 8 KB · Supported · 32-pin UFQFPN, 5 x 5 mm

Liên hệ để biết giá

Xem tài liệu →

STM32G031K8U7TR Tỷ lệ tối đa & tính chất điện

Core Arm Cortex-M0+, 32-bit RISC
Maximum CPU Frequency 64 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 8 KB
SRAM Protection Hardware parity check
Flash Protection Protection and securable area
Điện áp cung cấp hoạt động 1.7 V to 3.6 V
Operating Temperature Options -40°C to 85°C, -40°C to 105°C, or -40°C to 125°C
Hộp 32-pin UFQFPN, 5 x 5 mm
Architecture 32-bit RISC
Product Series STM32G0 mainstream
Core Supply Internal VCORE supply generated by an embedded linear voltage regulator

Hướng dẫn cấu hình chân STM32G031K8U7TR 32-pin ufqfpn, 5 x 5 mm

Cấu hình chân cho STM32G031K8U7TR (32-pin ufqfpn, 5 x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 32-pin ufqfpn, 5 x 5 mm cho STM32G031K8U7TR

Không có dữ liệu chân cụ thể sẵn có cho STM32G031K8U7TR.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

STM32G031K8U7TR phù hợp cho 6 Áp dụngs: Industrial Sensor Node, Compact Motor Control, Consumer Interface Controller, Battery-Powered Data Logger, LED Lighting Controller, Secure Connected Control Module.

🏭

Industrial Sensor Node

The STM32G031K8U7TR fits compact industrial sensor nodes that acquire measurements, apply filtering, and communicate status over a serial interface. Its 64 MHz Arm Cortex-M0+ core provides deterministic control performance, while 64 KB Flash and 8 KB SRAM accommodate drivers, acquisition logic, and protocol state. The 1.7 V to 3.6 V supply range supports low-voltage sensor systems. Place the device on a compact 5 x 5 mm UFQFPN land pattern and follow the datasheet decoupling and exposed-pad guidance. Confirm the selected temperature grade against the installation environment before production release.

⚡

Compact Motor Control

The STM32G031K8U7TR is appropriate for small brushed-motor or stepper-control modules where the controller must combine timing functions, communication, and protection logic in a limited footprint. The 64 MHz Cortex-M0+ core can execute motion algorithms and monitor position inputs, while 8 KB of SRAM supports working control state. Its 32-pin UFQFPN package leaves board area for power conversion and driver circuitry. Use the manufacturer pin table to map timer outputs, PWM functions, and debug signals, and preserve the exposed-pad thermal connection to maintain reliable operation at elevated ambient temperatures.

📱

Consumer Interface Controller

The STM32G031K8U7TR can serve as the central controller in compact consumer accessories that combine buttons, indicators, sensors, and a serial host interface. Its 64 KB Flash supports application firmware and boot logic, while 8 KB SRAM is adequate for protocol buffers and user-interface state. The 64 MHz core improves responsiveness for debouncing, display updates, and communication tasks. The low-voltage 1.7 V to 3.6 V operating range simplifies integration with portable power systems. Validate accessory timing and peripheral assignments against the manufacturer datasheet rather than assuming compatibility with other STM32G0 packages.

🧩

Battery-Powered Data Logger

The STM32G031K8U7TR is suitable for a battery-powered environmental logger that periodically samples sensors, records results, and transfers data through a low-power serial link. Its Cortex-M0+ core provides efficient computation without requiring a higher-performance MCU, and 64 KB Flash accommodates firmware, calibration data, and compact logs. The 8 KB SRAM provides working space for acquisition and packet assembly. Use the datasheet's power modes and wakeup behavior to build the duty cycle, and route the 1.7 V to 3.6 V supply through a regulator capable of meeting transient and quiescent-current requirements for the complete logger.

💡

LED Lighting Controller

The STM32G031K8U7TR can drive intelligent LED lighting modules that require timed fading, status indication, and communication with a master controller. The 64 MHz core provides sufficient timing resolution for PWM generation, effects processing, and input handling, while the 5 x 5 mm UFQFPN footprint supports compact lamp electronics. The 32-pin package offers dedicated digital and timer resources, subject to the exact alternate-function mapping in the datasheet. Design the layout so switching-driver power stages remain separated from sensitive control traces, and use the exposed-pad implementation specified by STMicroelectronics for electrical and thermal performance.

🌐

Secure Connected Control Module

The STM32G031K8U7TR fits connected control modules that need a protected code area, firmware update capability, and machine-to-machine communications. Its 64 KB Flash includes protection and a securable area, and the 8 KB SRAM includes hardware parity checking for improved integrity. The Cortex-M0+ core handles protocol framing, local control, and diagnostic logic in a compact package. Design the boot and debug strategy around the manufacturer pin configuration, and use the secure-area features according to the application note and reference manual guidance. Supply filtering and exposed-pad implementation must follow the manufacturer recommendations.

What is the operating voltage of STM32G031K8U7TR?
The STM32G031K8U7TR operates from 1.7 V to 3.6 V. The manufacturer datasheet specifies VCORE as an internal supply for digital peripherals, SRAM, and Flash memory, with VCORE produced by an embedded linear voltage regulator. Designers should follow the datasheet's external supply, decoupling, and voltage-rail requirements when building the power tree.
What are the key specifications of STM32G031K8U7TR?
The STM32G031K8U7TR combines a 64 MHz Arm Cortex-M0+ core, 64 KB of protected Flash, and 8 KB of parity-checked SRAM in a 32-pin UFQFPN package. Its listed operating range is 1.7 V to 3.6 V. The manufacturer identifies the STM32G031x4, x6, and x8 as mainstream devices built around a high-performance 32-bit RISC core.
Where to download STM32G031K8U7TR datasheet PDF?
The official STM32G031K8U7TR datasheet is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32g031k8.pdf. Use this manufacturer document for the complete pin description, package drawing, electrical characteristics, memory map, peripheral details, and application guidance. The STMicroelectronics product page also provides family-level information.
Where can I find the STM32G031K8U7TR pinout?
The STM32G031K8U7TR pinout is located in the pin-description section of the manufacturer datasheet at https://www.st.com/resource/en/datasheet/stm32g031k8.pdf. The device is supplied in a 32-pin UFQFPN package with an exposed pad. Use the package pin table rather than relying on a generic QFN drawing when assigning power, ground, reset, debug, and peripheral signals.
What is the STM32G031K8U7TR package and pin count?
The STM32G031K8U7TR uses a 32-pin UFQFPN package measuring 5 x 5 mm. Distributor product information identifies the package as 32-UFQFPN (5x5). The datasheet package drawing should be used for land pattern, exposed-pad, thermal-pad, and solder-mask details because generic QFN dimensions must not be assumed.
How much Flash and SRAM does STM32G031K8U7TR have?
The STM32G031K8U7TR includes 64 KB of Flash memory and 8 KB of SRAM. The Flash supports protection and a securable area, while the SRAM includes hardware parity checking. These resources suit compact embedded control, communications, acquisition, and human-interface applications that need deterministic access to code and working data.
Can STM32G031K8U7TR be used for low-power embedded control?
The STM32G031K8U7TR is suitable for compact embedded control because it combines an Arm Cortex-M0+ core, 64 KB Flash, and 8 KB SRAM in a small 5 x 5 mm package. Its Cortex-M0+ architecture is optimized for efficient control tasks. Specific low-power modes, wakeup sources, and current consumption should be selected using the manufacturer datasheet.
STM32G031K8U7TR vs STM32G030K6T6TR - which is better?
The STM32G031K8U7TR is the better choice when 64 MHz performance and 64 KB Flash are required, because it is listed with a 64 MHz Cortex-M0+ core and 64 KB Flash. The STM32G030K6T6TR is a smaller-memory member of the STM32G0 family. Their package and pin compatibility must be confirmed in the datasheets before considering either part a replacement.
STM32G031K8U7TR vs STM32G031C8U6TR - what is the difference?
The STM32G031K8U7TR is listed in a 32-pin UFQFPN package, while the STM32G031C8U6TR is a different STM32G031 family variant with a larger pin count. Their package outlines and exposed-pad assignments are not interchangeable without a PCB review. The STM32G031K8U7TR should be selected when its 32-pin footprint matches the design.
When should I choose STM32G031K8U7TR over another STM32G0 device?
Choose the STM32G031K8U7TR when a design needs the listed combination of a 64 MHz Arm Cortex-M0+ core, 64 KB Flash, 8 KB SRAM, and a 32-pin 5 x 5 mm UFQFPN footprint. Select another STM32G0 member when its package, memory size, peripheral set, temperature grade, or qualification better matches the product requirements.
What can replace STM32G031K8U7TR?
A true replacement should use the same 32-pin 5 x 5 mm UFQFPN footprint and provide compatible pin assignments, electrical limits, and required peripherals. The STM32G031K8U6TR is the closest same-family ordering variant identified for the same package. Firmware, boot configuration, timing, and peripheral compatibility must still be verified before substitution.
Is STM32G031K8U7TR suitable for industrial and consumer applications?
The STM32G031K8U7TR can suit industrial and consumer applications when its operating temperature, supply, and peripheral requirements meet the product specification. Listed temperature options include -40°C to 85°C, -40°C to 105°C, and -40°C to 125°C. The exact ordering code and required qualification determine the appropriate temperature range.
Where can I buy STM32G031K8U7TR online?
Use the Request a Quote form on this page to inquire about STM32G031K8U7TR availability, quantity, and delivery timing. The manufacturer product page and authorized distribution listings identify the part as an active STM32G0 mainstream microcontroller. XAIPART can confirm the exact suffix, package, and production requirements before an order is placed.
What is the price of STM32G031K8U7TR?
Current commercial pricing for the STM32G031K8U7TR is handled through the Request a Quote form on this page. Quote requests should specify the required quantity, packaging format, delivery destination, and production schedule. The manufacturer and distributor product pages confirm the exact 32-pin UFQFPN device, but displayed market prices can change with quantity and availability.
What is the lead time for STM32G031K8U7TR?
Current lead time for STM32G031K8U7TR should be confirmed through the Request a Quote form on this page. Include your required quantity, approved supplier status, target date, and packaging needs in the request. The STM32G031K8U7TR is a standard catalog MCU, but production scheduling and regional inventory can affect the commitment.

Dữ liệu tham khảo kỹ thuật cho STM32G031K8U7TR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose STM32G031K8U7TR when the board requires a 64 MHz Arm Cortex-M0+ controller with 64 KB Flash, 8 KB SRAM, a 1.7 V to 3.6 V supply range, and a 32-pin 5 x 5 mm UFQFPN footprint. STM32G031K8U6TR is the closest same-family ordering-code alternative when its temperature and qualification details satisfy the product specification. STM32G031K8U6 is another same-device option, but its packaging suffix must be matched to the assembly process. Other STM32G0 devices, including STM32G031C8U6TR, STM32G030K6T6TR, and STM32G030C8T6TR, should not be treated as automatic drop-in replacements because their package sizes, pin counts, exposed-pad layouts, and alternate-function assignments can differ. Final substitution requires comparison of the package drawing, pin table, electrical characteristics, memory map, peripheral configuration, and boot behavior.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này STM32G031K8U6TR STM32G031K8U6
Package 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm) 32-pin UFQFPN (5 x 5 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 64 MHz 64 MHz 64 MHz
Flash Memory 64 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB
Operating Supply Voltage 1.7 V to 3.6 V 1.7 V to 3.6 V 1.7 V to 3.6 V
Core Architecture 32-bit RISC 32-bit RISC 32-bit RISC
Ordering Suffix U7TR U6TR U6

Bảo phân biệt quan trọng

  • Exact package-family option with the same listed core and memory ratings (vsSTM32G031K8U6TR)
  • Base ordering-code availability within the same device family (vsSTM32G031K8U6)
  • Specific suffix selection preserves the intended manufacturer ordering configuration (vsSTM32G031K8U6TR)

Ghi chú thiết kế

Follow the STMicroelectronics 32-pin UFQFPN land-pattern and exposed-pad guidance exactly. Connect the exposed pad to the appropriate ground or supply arrangement specified in the datasheet, provide adequate thermal copper, and confirm the paste stencil and reflow profile during board qualification. Generic QFN layouts may not reproduce the manufacturer-recommended thermal and electrical construction.

Build the 1.7 V to 3.6 V supply rail so that the MCU sees no voltage outside the datasheet operating range, including startup and transient conditions. Place the recommended bypass capacitors close to their associated supply pins and use a low-noise source for sensitive analog measurements. Review the embedded linear regulator and VCORE arrangement in the manufacturer datasheet before selecting external power components.

Do not assume that all STM32G0 devices are interchangeable because memory density, package pin count, exposed-pad connections, alternate functions, and ordering suffixes can change the pinout. For a board replacement, compare the target and candidate package drawings and pin-description tables, then verify boot, debug, oscillator, and peripheral connections. Firmware should also be regression-tested on the exact ordering code.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The retrieved manufacturer and distributor information does not state the requested compliance statuses. Verify declarations for the exact ordering code with the manufacturer before regulatory submission.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

STM32G031K8U7TR datasheet STM32G031K8U7TR pinout STM32G031K8U7TR datasheet pdf STM32G031K8U7TR equivalent STM32G031K8U7TR replacement STM32G031K8U7TR footprint STM32G031K8U7TR price STM32G031K8U7TR stock STMicroelectronics STM32G031K8U7TR STM32G031K8 32 UFQFPN STM32G031K8U7TR vs STM32G031K8U6TR STM32G031K8 64MHz Cortex-M0+

Các bộ phận và thuật ngữ liên quan

STMicroelectronics STM32G031K8U7TR STM32G031K8U6TR STM32G031K8U6 STM32G031K8 STM32G0 Arm Cortex-M0+ 32-bit RISC core microcontroller embedded processor semiconductor 64 KB Flash memory 8 KB SRAM 32-pin UFQFPN UFQFPN family QFN family surface mount 1.7 V to 3.6 V VCORE embedded linear voltage regulator hardware parity check securable flash area industrial sensor node compact motor control connected control module
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ