STMicroelectronics

STM8L151G4Y6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

N.º de pieza: STM8L151G4Y6TR ✓ Activo
2.5 V or 3.3 V Vdss 28-WLCSP, 1.7 x 2.84 mm Package 16 MHz Speed 32 KB Memory
MOQ: 1 |

STM8L151G4Y6TR Descripción general

The STMicroelectronics STM8L151G4Y6TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB of Flash memory, and a 28-WLCSP package measuring approximately 1.7 x 2.84 mm. Designed for compact, battery-operated systems, it combines an LCD controller, real-time clock, ADC, DAC, comparators, timers, and serial interfaces in a space-efficient device.

An ultra-low-power microcontroller is an embedded controller designed to maintain accurate operation while consuming very little energy. The STM8L family belongs to the hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices intended for portable, industrial, consumer, and always-on applications. Low-power operating modes are especially valuable in devices that spend most of their service life asleep between sensor readings, user actions, or scheduled events.

Key device features include 32 KB of Flash, 1 KB of data EEPROM, a 16 MHz maximum CPU frequency, LCD support, RTC capability, and 2.5 V or 3.3 V operation. The integrated ADC, DAC, comparators, and communication peripherals reduce the need for discrete support components. The STM8L151x4/6 medium-density platform also provides modular peripherals and a common software approach across related STM8L devices, which can simplify firmware migration within the family.

The controller uses an 8-bit STM8 architecture optimized for low-power embedded control rather than high-throughput application processing. Its combination of LCD drive capability and serial interfaces supports human-machine interfaces, portable instruments, compact sensors, and low-energy monitoring systems. The small 28-WLCSP footprint enables dense layouts, but its fine pitch requires careful PCB layout, solder-paste control, inspection, and assembly planning.

Typical applications include low-power sensor nodes, compact health-monitoring products, industrial measurement modules, LCD-driven meters, remote controls, energy-aware IoT devices, and portable laboratory equipment. The STM8L151G4Y6TR is particularly appropriate where a compact package, local display interface, low-power operation, and mixed-signal peripherals are needed without an external display controller.

PCB design should prioritize a clean supply path, adequate decoupling, and controlled escape routing from the 28-WLCSP lands. Confirm the exposed-pad, thermal, and assembly requirements in the manufacturer datasheet before layout release. Firmware selection should also account for the exact memory configuration and peripheral map of the ordered device rather than assuming that all STM8L variants are interchangeable.

Alternativas directas para STM8L151G4Y6TR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

STM8L151G4Y3TR

✅ Sustitución directa
📦 28-WLCSP (1.7 x 2.84 mm)
Same STM8L151G4 Y-series package and core family; Y3 and Y6 suffix characteristics differ by up to 30% in the compared ordering attributes.

📋 Alternativa de referencia (no en el catálogo)

STM8L151G6Y6TR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-WLCSP (1.7 x 2.84 mm)
Same STM8L151 medium-density WLCSP family and 16 MHz class; G6 offers additional device resources while retaining the target package architecture.

📋 Alternativa de referencia (no en el catálogo)

STM8L152G4Y6TR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-WLCSP (1.7 x 2.84 mm)
Same STM8L151/152 medium-density 8-bit platform and Y6 WLCSP package; peripheral allocation and device-specific functions require verification.

📋 Alternativa de referencia (no en el catálogo)

STM8L152G6Y6TR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-WLCSP (1.7 x 2.84 mm)
Same STM8L medium-density Y6 WLCSP architecture and 16 MHz class; G6 resource level differs from G4 by approximately 20% in the compared capability set.

📋 Alternativa de referencia (no en el catálogo)

STM8L151G4Y6TR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
STMicroelectronics
📦 28-WLCSP (1.7 x 2.84 mm)
8-bit ultra-low-power microcontroller · STM8L EnergyLite · 16 MHz · 32 KB · 32K x 8 bits · 1 KB · 2.5 V or 3.3 V · 8-bit STM8 CISC

Consulte el precio

Ver hoja de datos →

STM8L151G4Y6TR Valores máximos y características eléctricas

Product Type 8-bit ultra-low-power microcontroller
Series STM8L EnergyLite
Maximum CPU Frequency 16 MHz
Flash Memory 32 KB
Program Memory Organization 32K x 8 bits
Data EEPROM 1 KB
Tensión de alimentación 2.5 V or 3.3 V
Architecture 8-bit STM8 CISC
Encapsulado 28-WLCSP, 1.7 x 2.84 mm
Tipo de montaje Surface mount
LCD Controller Integrated LCD controller
Real-Time Clock Integrated RTC
Analog Peripherals ADC, DAC, and comparators
Communication Peripherals USART, I2C, and SPI
Timers Integrated timers
Delivery Format Tape and reel

Guía de configuración de pines de STM8L151G4Y6TR 28-wlcsp, 1.7 x 2.84 mm

Configuración de pines para STM8L151G4Y6TR (encapsulado 28-wlcsp, 1.7 x 2.84 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 28-wlcsp, 1.7 x 2.84 mm para STM8L151G4Y6TR

No hay datos detallados de patillaje disponibles para STM8L151G4Y6TR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

STM8L151G4Y6TR es adecuado para 6 aplicacións: Battery-Powered Sensor Nodes, LCD-Driven Metering Devices, Portable Health and Wellness Monitors, Industrial Condition Monitoring, Low-Energy IoT Endpoints, Portable Laboratory Instruments.

🧩

Battery-Powered Sensor Nodes

The STM8L151G4Y6TR fits battery-powered sensor nodes because its 16 MHz STM8L controller provides responsive measurement and control while the low-power architecture supports reduced operating consumption during idle periods. The integrated 12-bit-class ADC functionality identified for the family enables analog sensor conditioning without a separate converter, while USART, I2C, and SPI provide paths to external sensors and radios. Its 32 KB Flash accommodates event logic, calibration data, and protocol handling. The main engineering trade-off is the 28-WLCSP footprint: the 1.7 x 2.84 mm package saves board area but requires fine-pitch assembly and careful decoupling placement.

📺

LCD-Driven Metering Devices

The STM8L151G4Y6TR is well suited to compact metering devices because the STM8L151x4/6 family integrates an LCD controller alongside the MCU core. A 16 MHz clock is sufficient for keypad scanning, display updates, measurement sequencing, and local data logging, while the 32 KB Flash provides room for calibration tables and application firmware. The ADC, DAC, and comparators support direct sensor-interface and threshold functions. Compared with a display-equipped solution based on a larger UFQFPN package, the 28-WLCSP allows a more compact instrument faceplate, although LCD glass routing and exposed-pad layout must be checked against the manufacturer drawings.

💊

Portable Health and Wellness Monitors

The STM8L151G4Y6TR supports portable health and wellness monitors that combine low-power operation, local sensing, and serial data transfer. Its 16 MHz 8-bit core can coordinate sensor acquisition, filtering, user input, and status indication, while the integrated ADC avoids a separate analog front-end converter for suitable sensor signals. The 1 KB EEPROM can retain small configuration or state values, and RTC support helps timestamp scheduled measurements. The compact 28-WLCSP package is valuable in wearable or handheld form factors, but low-energy operation still depends on the selected sleep mode, display load, sensor duty cycle, and battery current rather than processor frequency alone.

🏭

Industrial Condition Monitoring

The STM8L151G4Y6TR can serve as the local controller in industrial condition-monitoring modules that periodically inspect analog sensors and transmit results over a serial link. Its integrated ADC, comparators, timers, and communication peripherals reduce external component count, while the 32 KB Flash supports event classification and protocol buffering. The ultra-low-power STM8L architecture is advantageous for remote or battery-assisted installations, and the 16 MHz clock provides enough throughput for basic signal conditioning without a high-power processor. Industrial qualification, operating-temperature limits, and isolation requirements must be checked separately because the package and family characteristics alone do not establish compliance with a specific industrial standard.

🌐

Low-Energy IoT Endpoints

The STM8L151G4Y6TR fits low-energy IoT endpoints that combine a small local sensor interface with an external communications module. The MCU provides a 16 MHz control core, 32 KB Flash, RTC, ADC, DAC, and standard serial peripherals without requiring a high-performance application processor. In a typical design, it wakes on a timer or external event, reads a sensor, processes the measurement, updates an indicator, and returns to a low-power state. Its 28-WLCSP package supports dense endpoint construction. The engineering trade-off is that fine-pitch assembly, limited Flash margin, and vendor-specific firmware ecosystem can make STM8L101 or STM8L152 options easier to deploy in some product variants.

🔧

Portable Laboratory Instruments

The STM8L151G4Y6TR is appropriate for portable laboratory instruments that need local measurement, control, data display, and serial communication in a compact enclosure. Its 16 MHz 8-bit core can supervise an ADC measurement sequence and drive an LCD, while the DAC and comparators support reference generation and signal-level decisions. The 32 KB Flash is useful for compact firmware, although larger waveform buffers or intensive data processing may require external storage. The 28-WLCSP package reduces instrument footprint and can simplify panel spacing, yet assembly yield, test access, thermal behavior, and exposed-pad requirements must be addressed in the PCB and production plan.

What is the STM8L151G4Y6TR?
The STM8L151G4Y6TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller operating at up to 16 MHz, with 32 KB of Flash and 1 KB of data EEPROM. According to the STMicroelectronics product page, it belongs to the medium-density STM8L151x4/6 family and is packaged in a compact 28-WLCSP measuring approximately 1.7 x 2.84 mm.
What are the key specifications of STM8L151G4Y6TR that engineers should know?
The principal specifications are a 16 MHz maximum clock, 32 KB of Flash, 1 KB of EEPROM, 2.5 V or 3.3 V operation, and a 28-WLCSP package. The device also integrates an LCD controller, RTC, ADC, DAC, comparators, timers, USART, I2C, and SPI. STMicroelectronics describes the STM8L151x4/6 group as an ultra-low-power, medium-density 8-bit family designed for embedded control.
Where can I download the STM8L151G4Y6TR datasheet PDF?
The official STM8L151G4 product page is the primary starting point for the manufacturer datasheet and supporting documentation. According to STMicroelectronics, the page covers the medium-density STM8L151x4/6 and STM8L152x4/6 devices. Use the manufacturer PDF for authoritative pin assignments, electrical limits, memory maps, timing information, and package drawings.
Where can I find the STM8L151G4Y6TR pinout?
The STM8L151G4Y6TR pinout is documented in the manufacturer’s STM8L151x4/6 datasheet, including the 28-WLCSP land pattern and pin descriptions. Do not infer assignments from a larger STM8L package because the pin count and exposed thermal-pad arrangement differ. Use the package drawing and pin-description table together when assigning PCB tracks and test points.
Is STM8L151G4Y6TR suitable for battery-operated sensor nodes?
The STM8L151G4Y6TR is suitable for battery-operated sensor nodes because it is an ultra-low-power 8-bit MCU with integrated ADC, timers, RTC, and serial peripherals. The 16 MHz operating speed supports responsive control and measurement, while low-power operating modes can reduce consumption between events. Final battery-life calculations must include the selected sleep mode, sensor current, and duty cycle.
What is the difference between STM8L151G4Y6TR and STM8L151G4U6TR?
STM8L151G4Y6TR uses a 28-WLCSP package and is listed with 32 KB of Flash, while STM8L151G4U6TR uses a 28-UFQFPN package and is listed with 16 KB of Flash. The package difference requires a different PCB footprint, so STM8L151G4U6TR is not a pin-to-pin drop-in replacement despite belonging to the same STM8L151G4 family.
When should I choose STM8L151G4Y6TR over STM8L151G4U6TR?
Choose STM8L151G4Y6TR when the design needs the 28-WLCSP footprint and 32 KB of Flash. Choose STM8L151G4U6TR when the 28-UFQFPN package is preferred and 16 KB of Flash is sufficient. Because their land patterns differ, package choice should be made before PCB routing, and firmware memory assumptions should match the selected orderable device.
What is the best drop-in replacement for STM8L151G4Y6TR?
The closest same-family drop-in candidates are STM8L151G4Y3TR and related STM8L151/STM8L152 Y-package variants that retain the 28-WLCSP footprint and closely aligned memory and peripheral configurations. No verified cross-manufacturer pin-compatible replacement was identified. Confirm voltage, Flash, EEPROM, pin function, timing, and qualification requirements against the manufacturer datasheet before approving a substitution.
Can STM8L151G4Y3TR replace STM8L151G4Y6TR?
STM8L151G4Y3TR can be evaluated as a same-family, same-package drop-in candidate, but it should not be treated as an unconditional replacement. The relevant differences include the Y3 and Y6 device variants and their associated grade, temperature, or ordering characteristics. Verify the exact pinout, supply limits, memory configuration, lifecycle status, and qualification requirements for the target application.
What can replace STM8L151G4Y6TR in an embedded design?
A replacement should preserve the STM8L architecture, 28-WLCSP footprint, memory requirements, and critical peripheral assignments. STM8L151G4Y3TR is a directly comparable same-family candidate, while related STM8L151G6 and STM8L152 variants can be considered when their additional resources remain compatible with the firmware. No cross-manufacturer drop-in equivalent was established for this package and peripheral combination.
Is STM8L151G4Y6TR the same as STM8L151G4Y3TR?
No. STM8L151G4Y3TR and STM8L151G4Y6TR are related orderable variants, not identical part numbers. They share the STM8L151G4 family and Y-series WLCSP packaging, but their suffix-defined characteristics can differ. Review the order-information table and product-status information to determine whether the variation affects qualification, temperature range, or application suitability.
Is STM8L151G4Y6TR suitable for LCD-driven industrial instruments?
The STM8L151G4Y6TR is suitable for compact LCD-driven instruments because it integrates an LCD controller alongside 32 KB of Flash, ADC, DAC, comparators, RTC, and serial interfaces. The 28-WLCSP package also supports space-constrained panel layouts. Confirm the required LCD segment count, interface voltage, panel timing, and exposed-pad layout during schematic and PCB review.
What tools can program the STM8L151G4Y6TR?
The STM8L151G4Y6TR is supported by the STM8 development and programming ecosystem, including STMicroelectronics programming tools and compatible debugging hardware. STMicroelectronics describes a modular peripheral design and common development tools across related STM8 families. Confirm the exact toolchain, debug adapter, option-byte configuration, and programming connector arrangement for production use.
Where can I buy STM8L151G4Y6TR online?
Use the “Request a Quote” form on this page to request STM8L151G4Y6TR pricing, stock confirmation, and lead time for the exact tape-and-reel order code. The manufacturer product page identifies the device within the STM8L151G4 family. Purchasing review should confirm the 28-WLCSP package, 32 KB Flash configuration, and authorized-channel status.
What is the price of STM8L151G4Y6TR?
Pricing and availability for STM8L151G4Y6TR change with market conditions, order quantity, and lifecycle status. Submit the “Request a Quote” form on this page with the required quantity, package, and target shipment location. The quote workflow provides a current commercial response without relying on a stale static price table.
What is the lead time and stock status for STM8L151G4Y6TR?
Current stock and lead time for STM8L151G4Y6TR should be confirmed through the “Request a Quote” form on this page. Include the required quantity, acceptable date code policy, and shipment destination. STMicroelectronics lists STM8L151G4 as a product family, while transaction-specific availability must be established for the complete orderable MPN.

Datos de referencia de ingeniería para STM8L151G4Y6TR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose STM8L151G4Y6TR when the PCB is designed specifically for the 28-WLCSP footprint and the application benefits from 32 KB of Flash, an LCD controller, mixed-signal peripherals, and low-power 8-bit control. STM8L151G4Y3TR is the closest same-family candidate when its suffix-specific electrical, qualification, and ordering characteristics satisfy the design. Consider STM8L151G6Y6TR or STM8L152G4Y6TR when the additional G6 resources or STM8L152 peripheral organization are useful, but verify their exact memory and pin functions against the firmware plan. STM8L151G4U6TR is useful for a new design that prefers 4 x 4 mm UFQFPN construction and can work with 16 KB of Flash; it requires a different footprint and is not a board-level drop-in replacement. No cross-manufacturer drop-in candidate was established for the target package, so firmware and pin compatibility are critical when changing suppliers.

Comparación con alternativas

Parámetro Este producto STM8L151G4Y3TR STM8L151G6Y6TR STM8L152G4Y6TR STM8L152G6Y6TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 28-WLCSP (1.7 x 2.84 mm) 28-WLCSP (1.7 x 2.84 mm) 28-WLCSP (1.7 x 2.84 mm) 28-WLCSP (1.7 x 2.84 mm) 28-WLCSP (1.7 x 2.84 mm)
CPU Architecture 8-bit STM8 CISC 8-bit STM8 CISC 8-bit STM8 CISC 8-bit STM8 CISC 8-bit STM8 CISC
Maximum Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB
Data EEPROM 1 KB 1 KB 1 KB 1 KB 1 KB
Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V
Integrated Peripherals LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI
Low-Power Positioning STM8L ultra-low-power medium-density family STM8L ultra-low-power medium-density family STM8L ultra-low-power medium-density family STM8L ultra-low-power medium-density family STM8L ultra-low-power medium-density family

Diferenciadores clave

  • Combines a 16 MHz controller with a compact 28-WLCSP footprint (frente a STM8L151G4U6TR)
  • Provides 32 KB of Flash in the compact Y6 package (frente a STM8L151G4U6TR)
  • Integrates display, real-time-clock, analog, and serial functions (frente a STM8L151G4Y3TR)
  • Retains the STM8L medium-density hardware platform (frente a STM8L152G4Y6TR)

Notas de diseño

Treat the 28-WLCSP as a fine-pitch assembly constraint rather than a simple footprint substitution. Use the manufacturer land pattern, mask and paste recommendations, and exposed-pad geometry without altering pad dimensions informally. Place the device near the LCD connector when it drives a display, and route decoupling connections directly to the relevant supply and ground pins with the shortest practical paths. The 1.7 x 2.84 mm package offers little assembly tolerance, so stencil design, solder-paste volume, reflow profile, and post-reflow inspection should be reviewed before production release.

Estimate average current from the actual operating profile rather than the maximum 16 MHz clock frequency. Identify the active current, sleep current, wake-up interval, LCD load, ADC duty cycle, and external-module contribution, then apply the resulting duty cycle to calculate system demand. Compare that estimate against the battery capacity and regulator efficiency. If the application depends on low energy consumption, measure current on the finished board because pull-ups, LEDs, LCD bias, and leakage paths can dominate the MCU contribution.

Keep analog inputs, LCD connections, and serial interfaces away from high-current switching paths and noisy digital nets. Provide a local ground return for the ADC and DAC reference network, use short traces for sensitive measurements, and follow the layout guidance in the manufacturer datasheet for exposed-pad connection. Add test points for supply, ground, reset, programming signals, and selected analog nodes so production diagnostics do not require redesigning the fine-pitch assembly.

Do not substitute STM8L151G4U6TR on an unchanged board because its 28-UFQFPN package differs from the 28-WLCSP target. Also avoid assuming that related G4, G6, Y3, Y6, STM8L151, and STM8L152 devices have identical option bytes, peripheral mappings, or qualification attributes. Review the order-information table, pin-description table, memory map, and application requirements as one replacement checklist before changing the bill of materials.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page identifies the STM8L151G4 family, but exact environmental and qualification declarations for the complete orderable MPN were not established. Verify them before release.

Búsquedas relacionadas

STM8L151G4Y6TR datasheet STM8L151G4Y6TR pinout STM8L151G4Y6TR datasheet pdf STM8L151G4Y6TR replacement STM8L151G4Y6TR equivalent STM8L151G4Y6TR price STM8L151G4Y6TR stock STM8L151G4Y6TR 28-WLCSP STM8L151G4Y6TR 16MHz 32KB STM8L151G4Y6TR vs STM8L151G4U6TR STM8L151G4Y6TR application circuit STMicroelectronics STM8L151G4Y6TR

Componentes & términos relacionados

STMicroelectronics STM8L151G4Y6TR STM8L151G4Y3TR STM8L151G4U6TR STM8L151G6Y6TR STM8L152G4Y6TR STM8L152G6Y6TR STM8L EnergyLite 8-bit microcontroller embedded microcontroller ultra-low-power microcontroller STM8 architecture 28-WLCSP QFN family surface-mount device 16 MHz 32 KB Flash 1 KB EEPROM LCD controller real-time clock ADC DAC USART I2C SPI IoT sensor node
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ