STM8L151G4Y6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
Référence : STM8L151G4Y6TR ✓ ActifSTM8L151G4Y6TR Présentation
An ultra-low-power microcontroller is an embedded controller designed to maintain accurate operation while consuming very little energy. The STM8L family belongs to the hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices intended for portable, industrial, consumer, and always-on applications. Low-power operating modes are especially valuable in devices that spend most of their service life asleep between sensor readings, user actions, or scheduled events.
Key device features include 32 KB of Flash, 1 KB of data EEPROM, a 16 MHz maximum CPU frequency, LCD support, RTC capability, and 2.5 V or 3.3 V operation. The integrated ADC, DAC, comparators, and communication peripherals reduce the need for discrete support components. The STM8L151x4/6 medium-density platform also provides modular peripherals and a common software approach across related STM8L devices, which can simplify firmware migration within the family.
The controller uses an 8-bit STM8 architecture optimized for low-power embedded control rather than high-throughput application processing. Its combination of LCD drive capability and serial interfaces supports human-machine interfaces, portable instruments, compact sensors, and low-energy monitoring systems. The small 28-WLCSP footprint enables dense layouts, but its fine pitch requires careful PCB layout, solder-paste control, inspection, and assembly planning.
Typical applications include low-power sensor nodes, compact health-monitoring products, industrial measurement modules, LCD-driven meters, remote controls, energy-aware IoT devices, and portable laboratory equipment. The STM8L151G4Y6TR is particularly appropriate where a compact package, local display interface, low-power operation, and mixed-signal peripherals are needed without an external display controller.
PCB design should prioritize a clean supply path, adequate decoupling, and controlled escape routing from the 28-WLCSP lands. Confirm the exposed-pad, thermal, and assembly requirements in the manufacturer datasheet before layout release. Firmware selection should also account for the exact memory configuration and peripheral map of the ordered device rather than assuming that all STM8L variants are interchangeable.
Alternatives de remplacement direct pour STM8L151G4Y6TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
STM8L151G4Y3TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM8L151G6Y6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM8L152G4Y6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM8L152G6Y6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM8L151G4Y6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM8L151G4Y6TR Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit ultra-low-power microcontroller |
| Series | STM8L EnergyLite |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 32 KB |
| Program Memory Organization | 32K x 8 bits |
| Data EEPROM | 1 KB |
| Tension d'alimentation | 2.5 V or 3.3 V |
| Architecture | 8-bit STM8 CISC |
| Boîtier | 28-WLCSP, 1.7 x 2.84 mm |
| Type de montage | Surface mount |
| LCD Controller | Integrated LCD controller |
| Real-Time Clock | Integrated RTC |
| Analog Peripherals | ADC, DAC, and comparators |
| Communication Peripherals | USART, I2C, and SPI |
| Timers | Integrated timers |
| Delivery Format | Tape and reel |
Guide de configuration des broches du STM8L151G4Y6TR 28-wlcsp, 1.7 x 2.84 mm
Configuration des broches du STM8L151G4Y6TR (boîtier 28-wlcsp, 1.7 x 2.84 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM8L151G4Y6TR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM8L151G4Y6TR convient pour 6 applications: Battery-Powered Sensor Nodes, LCD-Driven Metering Devices, Portable Health and Wellness Monitors, Industrial Condition Monitoring, Low-Energy IoT Endpoints, Portable Laboratory Instruments.
Battery-Powered Sensor Nodes
The STM8L151G4Y6TR fits battery-powered sensor nodes because its 16 MHz STM8L controller provides responsive measurement and control while the low-power architecture supports reduced operating consumption during idle periods. The integrated 12-bit-class ADC functionality identified for the family enables analog sensor conditioning without a separate converter, while USART, I2C, and SPI provide paths to external sensors and radios. Its 32 KB Flash accommodates event logic, calibration data, and protocol handling. The main engineering trade-off is the 28-WLCSP footprint: the 1.7 x 2.84 mm package saves board area but requires fine-pitch assembly and careful decoupling placement.
Recommandé
LCD-Driven Metering Devices
The STM8L151G4Y6TR is well suited to compact metering devices because the STM8L151x4/6 family integrates an LCD controller alongside the MCU core. A 16 MHz clock is sufficient for keypad scanning, display updates, measurement sequencing, and local data logging, while the 32 KB Flash provides room for calibration tables and application firmware. The ADC, DAC, and comparators support direct sensor-interface and threshold functions. Compared with a display-equipped solution based on a larger UFQFPN package, the 28-WLCSP allows a more compact instrument faceplate, although LCD glass routing and exposed-pad layout must be checked against the manufacturer drawings.
Recommandé
Portable Health and Wellness Monitors
The STM8L151G4Y6TR supports portable health and wellness monitors that combine low-power operation, local sensing, and serial data transfer. Its 16 MHz 8-bit core can coordinate sensor acquisition, filtering, user input, and status indication, while the integrated ADC avoids a separate analog front-end converter for suitable sensor signals. The 1 KB EEPROM can retain small configuration or state values, and RTC support helps timestamp scheduled measurements. The compact 28-WLCSP package is valuable in wearable or handheld form factors, but low-energy operation still depends on the selected sleep mode, display load, sensor duty cycle, and battery current rather than processor frequency alone.
Recommandé
Industrial Condition Monitoring
The STM8L151G4Y6TR can serve as the local controller in industrial condition-monitoring modules that periodically inspect analog sensors and transmit results over a serial link. Its integrated ADC, comparators, timers, and communication peripherals reduce external component count, while the 32 KB Flash supports event classification and protocol buffering. The ultra-low-power STM8L architecture is advantageous for remote or battery-assisted installations, and the 16 MHz clock provides enough throughput for basic signal conditioning without a high-power processor. Industrial qualification, operating-temperature limits, and isolation requirements must be checked separately because the package and family characteristics alone do not establish compliance with a specific industrial standard.
Recommandé
Low-Energy IoT Endpoints
The STM8L151G4Y6TR fits low-energy IoT endpoints that combine a small local sensor interface with an external communications module. The MCU provides a 16 MHz control core, 32 KB Flash, RTC, ADC, DAC, and standard serial peripherals without requiring a high-performance application processor. In a typical design, it wakes on a timer or external event, reads a sensor, processes the measurement, updates an indicator, and returns to a low-power state. Its 28-WLCSP package supports dense endpoint construction. The engineering trade-off is that fine-pitch assembly, limited Flash margin, and vendor-specific firmware ecosystem can make STM8L101 or STM8L152 options easier to deploy in some product variants.
Recommandé
Portable Laboratory Instruments
The STM8L151G4Y6TR is appropriate for portable laboratory instruments that need local measurement, control, data display, and serial communication in a compact enclosure. Its 16 MHz 8-bit core can supervise an ADC measurement sequence and drive an LCD, while the DAC and comparators support reference generation and signal-level decisions. The 32 KB Flash is useful for compact firmware, although larger waveform buffers or intensive data processing may require external storage. The 28-WLCSP package reduces instrument footprint and can simplify panel spacing, yet assembly yield, test access, thermal behavior, and exposed-pad requirements must be addressed in the PCB and production plan.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM8L151G4Y6TR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM8L151G4Y3TR | STM8L151G6Y6TR | STM8L152G4Y6TR | STM8L152G6Y6TR |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-WLCSP (1.7 x 2.84 mm) | 28-WLCSP (1.7 x 2.84 mm) | 28-WLCSP (1.7 x 2.84 mm) | 28-WLCSP (1.7 x 2.84 mm) | 28-WLCSP (1.7 x 2.84 mm) |
| CPU Architecture | 8-bit STM8 CISC | 8-bit STM8 CISC | 8-bit STM8 CISC | 8-bit STM8 CISC | 8-bit STM8 CISC |
| Maximum Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Data EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Integrated Peripherals | LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI | LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI | LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI | LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI | LCD, RTC, ADC, DAC, comparators, timers, USART, I2C, SPI |
| Low-Power Positioning | STM8L ultra-low-power medium-density family | STM8L ultra-low-power medium-density family | STM8L ultra-low-power medium-density family | STM8L ultra-low-power medium-density family | STM8L ultra-low-power medium-density family |
Principaux différenciateurs
- Combines a 16 MHz controller with a compact 28-WLCSP footprint (vs STM8L151G4U6TR)
- Provides 32 KB of Flash in the compact Y6 package (vs STM8L151G4U6TR)
- Integrates display, real-time-clock, analog, and serial functions (vs STM8L151G4Y3TR)
- Retains the STM8L medium-density hardware platform (vs STM8L152G4Y6TR)
Notes de conception
Treat the 28-WLCSP as a fine-pitch assembly constraint rather than a simple footprint substitution. Use the manufacturer land pattern, mask and paste recommendations, and exposed-pad geometry without altering pad dimensions informally. Place the device near the LCD connector when it drives a display, and route decoupling connections directly to the relevant supply and ground pins with the shortest practical paths. The 1.7 x 2.84 mm package offers little assembly tolerance, so stencil design, solder-paste volume, reflow profile, and post-reflow inspection should be reviewed before production release.
Estimate average current from the actual operating profile rather than the maximum 16 MHz clock frequency. Identify the active current, sleep current, wake-up interval, LCD load, ADC duty cycle, and external-module contribution, then apply the resulting duty cycle to calculate system demand. Compare that estimate against the battery capacity and regulator efficiency. If the application depends on low energy consumption, measure current on the finished board because pull-ups, LEDs, LCD bias, and leakage paths can dominate the MCU contribution.
Keep analog inputs, LCD connections, and serial interfaces away from high-current switching paths and noisy digital nets. Provide a local ground return for the ADC and DAC reference network, use short traces for sensitive measurements, and follow the layout guidance in the manufacturer datasheet for exposed-pad connection. Add test points for supply, ground, reset, programming signals, and selected analog nodes so production diagnostics do not require redesigning the fine-pitch assembly.
Do not substitute STM8L151G4U6TR on an unchanged board because its 28-UFQFPN package differs from the 28-WLCSP target. Also avoid assuming that related G4, G6, Y3, Y6, STM8L151, and STM8L152 devices have identical option bytes, peripheral mappings, or qualification attributes. Review the order-information table, pin-description table, memory map, and application requirements as one replacement checklist before changing the bill of materials.
Informations de conformité
The manufacturer product page identifies the STM8L151G4 family, but exact environmental and qualification declarations for the complete orderable MPN were not established. Verify them before release.