SY88713VKC - 622 Mbps PECL Post Amplifier | Microchip Technology
N.º de pieza: SY88713VKC ✓ ActivoSY88713VKC Descripción general
A PECL post amplifier is a signal-conditioning IC used in the receiver section of a high-speed digital link. Its limiter and amplification stage increase signal amplitude, reduce timing uncertainty, and regenerate a clean output waveform for the next circuit block. PECL, or positive emitter-coupled logic, is a differential high-speed logic family commonly used in telecommunications, serial links, clock distribution, and optical-network equipment. The SY88713VKC supports 622 Mbps operation, allowing it to address legacy and intermediate-rate fiber-optic and backplane interfaces.
The principal listed features are single-rail or 5 V power-supply operation, low-noise PECL data outputs, chatter-free PECL signal-detect output, and a TTL /EN input for control by conventional digital logic. These functions allow a system designer to monitor receiver activity and conditionally enable or disable downstream signal paths. The 3.3 V operating option is particularly useful where the interface logic uses a lower supply voltage while the surrounding board still uses 5 V PECL circuitry.
The SY88713VKC is a limiting post amplifier rather than a general-purpose linear amplifier. Its purpose is to recover a valid digital waveform from a degraded high-speed differential signal. Noise, jitter, attenuation, and reflections accumulated along a transmission path can reduce signal margin, so the amplifier restores amplitude and provides a defined output state before the signal reaches a clock recovery, deserializer, or other logic device.
Typical uses include telecommunications line cards, optical transceiver receiver channels, network interface equipment, clock-recovery circuits, and legacy SONET or related high-speed backplanes. In each case, the post amplifier can sit between a transmission line and downstream digital logic, provided the board layout preserves the differential impedance, provides proper PECL termination, and keeps the enable and signal-detect traces away from sensitive clock inputs.
PCB implementation should follow the manufacturer datasheet's recommended layout, including controlled-length differential routing, short return paths, and appropriate supply decoupling. Termination values, trace impedance, and device placement should be selected for the actual board stack-up rather than copied without calculation. The enable pin and signal-detect output also require logic-level review, because their interfacing behavior determines whether the receiver can be safely muted during reset or fault conditions.
This page identifies the SY88713VKC's core role, supply options, supported data rate, package, control features, pricing reference, and application context. Detailed absolute maximum ratings, propagation delay, jitter, input-output logic levels, and thermal limits should be confirmed in the manufacturer datasheet before the IC is released for a new high-speed circuit.
Alternativas directas para SY88713VKC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSY88713VKC Valores máximos y características eléctricas
| Product Type | PECL limiting post amplifier |
| Maximum Data Rate | 622 Mbps |
| Low-Voltage Supply Option | 3.3 V |
| High-Voltage Supply Option | 5 V |
| Supply Configuration | Single or 5 V |
| Output Logic | Low-noise PECL |
| Signal Detect Output | Chatter-free PECL |
| Enable Input | TTL-compatible /EN |
| Logic Family | PECL |
| Package Pin Count | 8 pins |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de SY88713VKC 8 pins
Configuración de pines para SY88713VKC (encapsulado 8 pins). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para SY88713VKC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY88713VKC es adecuado para 6 aplicacións: Telecom Receiver Line Cards, Optical Transceiver Receive Channels, High-Speed Backplane Receive Interfaces, Clock Recovery Input Conditioning, Network Equipment Redundant Receivers, Legacy High-Speed Test Equipment.
Telecom Receiver Line Cards
The SY88713VKC fits telecom line-card receiver paths that operate at up to 622 Mbps and require regenerated PECL signals. Place the device near the line-card input or connector launch, then use controlled differential routing and the prescribed PECL termination arrangement. Its limiting post-amplifier function restores amplitude before clock recovery or deserialization, while the chatter-free signal-detect output provides a direct activity indication. The TTL-compatible /EN input also allows the receiver chain to be disabled during reset. Designers should confirm propagation delay, jitter, output common-mode voltage, and supply-current margin against the individual channel requirements before releasing the layout.
Recomendado
Optical Transceiver Receive Channels
The SY88713VKC is suitable for regenerating a degraded differential signal at the receive side of an optical transceiver link operating up to 622 Mbps. Its 3.3 V or 5 V supply options support both legacy 5 V PECL systems and lower-voltage interface designs. The device provides low-noise PECL outputs and a chatter-free signal-detect output, allowing the receive path to be monitored before downstream clock-and-data-recovery circuitry. Layout should minimize the distance between the transceiver receiver, the post amplifier, and termination components, and should preserve controlled differential impedance through connector and package transitions.
Recomendado
High-Speed Backplane Receive Interfaces
The SY88713VKC can condition signals received through a controlled-impedance backplane when the target bit rate is 622 Mbps or lower. Cable loss, connector reflections, and crosstalk can reduce eye opening before the signal reaches digital logic, making a limiting stage useful. The post amplifier restores signal amplitude and supplies clean PECL outputs, while signal detect reports whether valid activity is present. The 8-pin surface-mount package should be surrounded by short differential traces and correctly placed termination or bias networks. Engineers should verify the complete channel budget, including attenuation, jitter, reflections, and receiver sensitivity, rather than relying on data-rate matching alone.
Recomendado
Clock Recovery Input Conditioning
The SY88713VKC is useful ahead of a clock-recovery or clock-and-data-recovery block when a 622 Mbps source requires deterministic PECL limiting. Regenerating the signal before the recovery circuit can reduce sensitivity to amplitude variation along the transmission path and supply a clean differential waveform with low-noise outputs. The signal-detect output can indicate whether the recovered clock source is active, while /EN allows controlled muting during initialization. Because phase noise and timing jitter accumulate through the channel, the amplifier must be placed close to the receiving device and its differential routing must follow the manufacturer's recommended layout to preserve the available timing margin.
Recomendado
Network Equipment Redundant Receivers
The SY88713VKC can be used in redundant or failover receiver branches where each incoming PECL link must be conditioned independently before selection logic. Its signal-detect output can assist the supervising circuit in determining which branch is active, and the TTL-compatible /EN input allows a branch to be disabled during switching. The device supports 3.3 V or 5 V operation, which helps align with mixed-voltage interface sections. Control timing, glitch behavior around enable transitions, and input common-mode range must be reviewed carefully. A clean implementation keeps the two receive branches physically separated enough to limit shared-impedance coupling and uses short output routes to the selection circuitry.
Recomendado
Legacy High-Speed Test Equipment
The SY88713VKC fits legacy test and measurement equipment that requires a PECL limiting stage for signals at or below 622 Mbps. It can condition a source output before an older logic analyzer, counter, or timing-measurement circuit, providing a more defined differential waveform and an activity indication. The device should remain close to the measured node to reduce additional propagation delay and sensitivity to board reflections. The TTL-compatible enable input can support repeatable test sequences by muting the output when it is not required. Engineers should account for the amplifier's propagation delay, jitter behavior, supply requirements, and output common-mode levels when calibrating timing measurements or interpreting captured waveforms.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY88713VKC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Diferenciadores clave
- Integrated receiver monitoring (frente a Generic PECL post amplifier)
- Integrated shutdown control (frente a Generic PECL post amplifier)
- Dual supply compatibility (frente a 5 V-only PECL post amplifier)
Notas de diseño
Treat the SY88713VKC as a high-speed differential signal-conditioning element. Route the input and output pairs as controlled-impedance traces, minimize vias and stubs, and keep the device close to the receiving or line-card connection. At 622 Mbps, small discontinuities and return-path discontinuities can add reflections and jitter even when the amplifier itself meets its specified data rate.
Use the manufacturer datasheet's recommended PECL termination, supply-decoupling, and pin-placement arrangement. The enable and signal-detect traces should be routed away from sensitive differential clock and data nets. Confirm that output common-mode voltage and input common-mode range match the adjacent device, and avoid placing slow control signals directly beneath the high-speed differential pair.
Do not select a replacement solely because it is described as a 622 Mbps PECL post amplifier. Verify the 8-pin pinout, differential input polarity, TTL /EN threshold, PECL signal-detect implementation, supply current, propagation delay, and output levels. Also distinguish the SY88713VKC from the SY88713VKC TR ordering code so that the requested physical packaging matches the assembly plan.
Información de cumplimiento
The available product descriptions do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Automotive qualification is not inferred from the high-speed communications application.