SY89824LHC - 1:22 HSTL Clock Driver | Microchip
N.º de pieza: SY89824LHC ✓ ActivoSY89824LHC Descripción general
A clock buffer or fanout driver is a timing IC that distributes one or more input clock signals across multiple outputs. Clock buffers preserve signal amplitude and edge timing while reducing loading on the source. A differential clock driver additionally transmits a clock as a complementary pair, improving noise immunity and making the device suitable for high-speed backplanes, processor interfaces, telecommunications equipment, and clock-distribution networks.
The SY89824LHC accepts LVPECL and HSTL input signals, operates from a 3 V to 3.6 V supply, and produces 22 complementary HSTL output pairs. Its 1:22 fanout allows one source clock to support as many as 22 destination loads. The specified 200 ps maximum part-to-part skew helps maintain timing relationship between outputs when the device is used to distribute a common clock.
Each HSTL output can drive 50 ohm to ground with no offset voltage, reducing the termination complexity normally encountered with single-ended clock networks. The device is described as a high-performance, low-voltage bus clock driver designed for 3.3 V systems. Its 64-pin TQFP exposed-pad construction supports controlled heat dissipation and high-density printed-circuit-board layouts.
Typical applications include server and networking backplanes, telecommunications line cards, storage controllers, processor clock trees, test equipment, and other systems that require multiple low-voltage differential clock outputs. In a backplane, the SY89824LHC can distribute a source clock while isolating the source from the capacitance and termination load presented by multiple destinations.
PCB design should preserve controlled-impedance routing for differential clock paths and provide the power and ground connectivity required by the exposed pad. Use the pin-description and layout guidance in the manufacturer datasheet when assigning connections. Confirm input logic levels, output termination, supply decoupling, and trace topology in simulation before releasing the layout.
This product summary combines the device function, fanout, logic-level, package, and timing characteristics with practical PCB guidance, source links, and verified drop-in-equivalent status. It supports faster component selection without presenting an unsupported cross-reference or an unconfirmed replacement as a drop-in option.
Alternativas directas para SY89824LHC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSY89824LHC Especificaciones
| Product Type | Clock fanout buffer and low-voltage bus clock driver |
| Fanout Ratio | 1:22 |
| Number of Differential Output Pairs | 22 pairs |
| Input Logic Levels | LVPECL and HSTL |
| Output Logic Level | Differential HSTL |
| Supply Voltage Range | 3 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Maximum Part-to-Part Skew | 200 ps |
| Output Termination Capability | 50 ohm to ground with no offset voltage |
| Encapsulado | 64-pin TQFP with exposed pad |
| Tipo de montaje | Surface mount |
| Input Configuration | 2 inputs |
Guía de configuración de pines de SY89824LHC 64-pin tqfp with exposed pad
Configuración de pines para SY89824LHC (encapsulado 64-pin tqfp with exposed pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89824LHC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89824LHC es adecuado para 6 aplicacións: Networking Backplane Clock Distribution, Processor and Interface Clock Trees, Telecommunications Line-Card Clocking, Data Storage and Interface Systems, Test and Measurement Equipment, Industrial Control and Automation Systems.
Networking Backplane Clock Distribution
The SY89824LHC fits backplane clock distribution where a common source must feed many destinations without directly loading the clock producer. Its 1:22 fanout provides 22 differential HSTL output pairs, while LVPECL and HSTL inputs simplify interface with compatible low-voltage clock sources. The 200 ps maximum part-to-part skew helps preserve a defined relationship among outputs. Route each branch as a controlled-impedance differential pair, provide the specified 50 ohm grounding arrangement, and keep power and ground returns close to the device.
Recomendado
Processor and Interface Clock Trees
A processor-based system can use the SY89824LHC when multiple interface or fabric clock branches require a single source to be repeated across up to 22 differential destinations. The device accepts LVPECL or HSTL clock inputs and emits complementary HSTL outputs, allowing a common distribution network to serve several clock domains. Its 200 ps maximum part-to-part skew must be included in the system timing budget. Confirm logic-level compatibility, edge-rate limits, and output termination for every destination before finalizing the clock topology.
Recomendado
Telecommunications Line-Card Clocking
The SY89824LHC is applicable in telecommunications equipment that distributes a low-voltage common clock across numerous line-card functions. A 1:22 fanout reduces the number of separate source-driver channels required, while differential HSTL signaling supports noise-conscious clock routing. The 200 ps maximum part-to-part skew provides a defined distribution tolerance for system budgeting. Use controlled-impedance routing, maintain consistent return paths, and verify the 3 V to 3.6 V supply requirement at every operating condition.
Recomendado
Data Storage and Interface Systems
The SY89824LHC can distribute a common reference clock to multiple storage, controller, or interface blocks when a 1:22 fanout and differential HSTL outputs are required. Its LVPECL and HSTL input flexibility supports different clock-source arrangements within the same board design. The 22-pair output capacity enables one package to serve many destinations, but each branch still requires correct termination and controlled geometry. Review source edge rate, destination thresholds, and the 200 ps maximum part-to-part skew in the complete timing analysis.
Recomendado
Test and Measurement Equipment
The SY89824LHC can be used in test and measurement equipment to distribute a low-voltage reference clock to many acquisition, sequencing, or comparison channels. Its 1:22 fanout and 22 differential HSTL output pairs allow a compact distribution stage, while the 200 ps maximum part-to-part skew assists instrument timing alignment. Keep clock and data routing physically separated from noisy analog sections, use controlled-impedance clock traces, and confirm that the instrument load and termination do not exceed the electrical operating conditions in the manufacturer datasheet.
Recomendado
Industrial Control and Automation Systems
The SY89824LHC can support industrial control systems that synchronize multiple processors, communication controllers, or data-conversion sections from a common clock. Differential HSTL outputs help preserve signal integrity across a larger PCB or backplane, and the 1:22 ratio reduces duplication of clock-generation circuitry. The device must operate from a 3 V to 3.6 V supply, and the maximum 200 ps part-to-part skew should be included in control-loop and communication timing margins. Validate startup, fault conditions, and termination continuity during hardware bring-up.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY89824LHC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Product Type | Clock fanout buffer and low-voltage bus clock driver |
| Brand | Microchip Technology |
| Package | 64-pin TQFP with exposed pad |
| Fanout Ratio | 1:22 |
| Differential Output Pairs | 22 pairs |
| Input Logic Levels | LVPECL and HSTL |
| Output Logic Level | Differential HSTL |
| Supply Voltage Range | 3 V to 3.6 V |
| Maximum Part-to-Part Skew | 200 ps |
| Output Termination Capability | 50 ohm to ground with no offset voltage |
Diferenciadores clave
- High fanout in one package (frente a Lower-fanout clock drivers)
- Flexible source logic-level support (frente a Single-input-logic clock buffers)
- Defined output timing relationship (frente a General-purpose distribution buffers)
Notas de diseño
Route all 22 differential HSTL output pairs as controlled-impedance traces, with continuous reference planes and symmetrical routing where practical. Keep the clock distribution away from switching nodes and high-current return paths. The 1:22 fanout makes trace-length balancing and uniform termination important because one marginal branch can affect source-to-destination clock quality across the network.
Use the manufacturer datasheet to select input, output, and bypass capacitors, and place them close to their associated pins. The SY89824LHC operates from 3 V to 3.6 V, so verify the actual board supply range under startup, load, and temperature conditions. Connect the exposed pad using the recommended thermal and electrical land pattern rather than treating it as an optional copper feature.
Confirm source edge rate, input common-mode voltage, and HSTL termination at every destination before committing the topology. The outputs are specified to drive 50 ohm to ground without offset voltage, but correct termination alone does not guarantee signal integrity. Use the datasheet timing and loading characteristics to establish trace length, layer transitions, and receiver-load limitations.
Do not substitute a clock driver based only on the 64-pin TQFP package or the 1:22 fanout ratio. A valid drop-in alternative must also match the pin assignment, LVPECL and HSTL input thresholds, differential HSTL output arrangement, supply range, output loading, and timing behavior. Verify exposed-pad connectivity and output mapping on the manufacturer package drawing.
Información de cumplimiento
The available product information does not state the environmental, automotive, halogen-free, or conflict-minerals status. These attributes require confirmation from the manufacturer declaration or product documentation before qualification.