SY89824LHC - 1:22 HSTL Clock Driver | Microchip
MPN: SY89824LHC ✓ فعالSY89824LHC جائزہ
A clock buffer or fanout driver is a timing IC that distributes one or more input clock signals across multiple outputs. Clock buffers preserve signal amplitude and edge timing while reducing loading on the source. A differential clock driver additionally transmits a clock as a complementary pair, improving noise immunity and making the device suitable for high-speed backplanes, processor interfaces, telecommunications equipment, and clock-distribution networks.
The SY89824LHC accepts LVPECL and HSTL input signals, operates from a 3 V to 3.6 V supply, and produces 22 complementary HSTL output pairs. Its 1:22 fanout allows one source clock to support as many as 22 destination loads. The specified 200 ps maximum part-to-part skew helps maintain timing relationship between outputs when the device is used to distribute a common clock.
Each HSTL output can drive 50 ohm to ground with no offset voltage, reducing the termination complexity normally encountered with single-ended clock networks. The device is described as a high-performance, low-voltage bus clock driver designed for 3.3 V systems. Its 64-pin TQFP exposed-pad construction supports controlled heat dissipation and high-density printed-circuit-board layouts.
Typical applications include server and networking backplanes, telecommunications line cards, storage controllers, processor clock trees, test equipment, and other systems that require multiple low-voltage differential clock outputs. In a backplane, the SY89824LHC can distribute a source clock while isolating the source from the capacitance and termination load presented by multiple destinations.
PCB design should preserve controlled-impedance routing for differential clock paths and provide the power and ground connectivity required by the exposed pad. Use the pin-description and layout guidance in the manufacturer datasheet when assigning connections. Confirm input logic levels, output termination, supply decoupling, and trace topology in simulation before releasing the layout.
This product summary combines the device function, fanout, logic-level, package, and timing characteristics with practical PCB guidance, source links, and verified drop-in-equivalent status. It supports faster component selection without presenting an unsupported cross-reference or an unconfirmed replacement as a drop-in option.
کے لیے ڈراپ اِن متبادل SY89824LHC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںSY89824LHC تفصیلات
| Product Type | Clock fanout buffer and low-voltage bus clock driver |
| Fanout Ratio | 1:22 |
| Number of Differential Output Pairs | 22 pairs |
| Input Logic Levels | LVPECL and HSTL |
| Output Logic Level | Differential HSTL |
| Supply Voltage Range | 3 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Maximum Part-to-Part Skew | 200 ps |
| Output Termination Capability | 50 ohm to ground with no offset voltage |
| پیکیج | 64-pin TQFP with exposed pad |
| ماؤنٹنگ ٹائپ | Surface mount |
| Input Configuration | 2 inputs |
SY89824LHC 64-pin tqfp with exposed pad پن کنفیگریشن گائیڈ
SY89824LHC (64-pin tqfp with exposed pad پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY89824LHC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SY89824LHC کے لیے موزوں ہے 6 ایپلیکیشنs: Networking Backplane Clock Distribution, Processor and Interface Clock Trees, Telecommunications Line-Card Clocking, Data Storage and Interface Systems, Test and Measurement Equipment, Industrial Control and Automation Systems.
Networking Backplane Clock Distribution
The SY89824LHC fits backplane clock distribution where a common source must feed many destinations without directly loading the clock producer. Its 1:22 fanout provides 22 differential HSTL output pairs, while LVPECL and HSTL inputs simplify interface with compatible low-voltage clock sources. The 200 ps maximum part-to-part skew helps preserve a defined relationship among outputs. Route each branch as a controlled-impedance differential pair, provide the specified 50 ohm grounding arrangement, and keep power and ground returns close to the device.
تجویز کردہ
Processor and Interface Clock Trees
A processor-based system can use the SY89824LHC when multiple interface or fabric clock branches require a single source to be repeated across up to 22 differential destinations. The device accepts LVPECL or HSTL clock inputs and emits complementary HSTL outputs, allowing a common distribution network to serve several clock domains. Its 200 ps maximum part-to-part skew must be included in the system timing budget. Confirm logic-level compatibility, edge-rate limits, and output termination for every destination before finalizing the clock topology.
تجویز کردہ
Telecommunications Line-Card Clocking
The SY89824LHC is applicable in telecommunications equipment that distributes a low-voltage common clock across numerous line-card functions. A 1:22 fanout reduces the number of separate source-driver channels required, while differential HSTL signaling supports noise-conscious clock routing. The 200 ps maximum part-to-part skew provides a defined distribution tolerance for system budgeting. Use controlled-impedance routing, maintain consistent return paths, and verify the 3 V to 3.6 V supply requirement at every operating condition.
تجویز کردہ
Data Storage and Interface Systems
The SY89824LHC can distribute a common reference clock to multiple storage, controller, or interface blocks when a 1:22 fanout and differential HSTL outputs are required. Its LVPECL and HSTL input flexibility supports different clock-source arrangements within the same board design. The 22-pair output capacity enables one package to serve many destinations, but each branch still requires correct termination and controlled geometry. Review source edge rate, destination thresholds, and the 200 ps maximum part-to-part skew in the complete timing analysis.
تجویز کردہ
Test and Measurement Equipment
The SY89824LHC can be used in test and measurement equipment to distribute a low-voltage reference clock to many acquisition, sequencing, or comparison channels. Its 1:22 fanout and 22 differential HSTL output pairs allow a compact distribution stage, while the 200 ps maximum part-to-part skew assists instrument timing alignment. Keep clock and data routing physically separated from noisy analog sections, use controlled-impedance clock traces, and confirm that the instrument load and termination do not exceed the electrical operating conditions in the manufacturer datasheet.
تجویز کردہ
Industrial Control and Automation Systems
The SY89824LHC can support industrial control systems that synchronize multiple processors, communication controllers, or data-conversion sections from a common clock. Differential HSTL outputs help preserve signal integrity across a larger PCB or backplane, and the 1:22 ratio reduces duplication of clock-generation circuitry. The device must operate from a 3 V to 3.6 V supply, and the maximum 200 ps part-to-part skew should be included in control-loop and communication timing margins. Validate startup, fault conditions, and termination continuity during hardware bring-up.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SY89824LHC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Product Type | Clock fanout buffer and low-voltage bus clock driver |
| Brand | Microchip Technology |
| Package | 64-pin TQFP with exposed pad |
| Fanout Ratio | 1:22 |
| Differential Output Pairs | 22 pairs |
| Input Logic Levels | LVPECL and HSTL |
| Output Logic Level | Differential HSTL |
| Supply Voltage Range | 3 V to 3.6 V |
| Maximum Part-to-Part Skew | 200 ps |
| Output Termination Capability | 50 ohm to ground with no offset voltage |
اہم امتیازی خصوصیات
- High fanout in one package (بمقابلہLower-fanout clock drivers)
- Flexible source logic-level support (بمقابلہSingle-input-logic clock buffers)
- Defined output timing relationship (بمقابلہGeneral-purpose distribution buffers)
ڈیزائن نوٹس
Route all 22 differential HSTL output pairs as controlled-impedance traces, with continuous reference planes and symmetrical routing where practical. Keep the clock distribution away from switching nodes and high-current return paths. The 1:22 fanout makes trace-length balancing and uniform termination important because one marginal branch can affect source-to-destination clock quality across the network.
Use the manufacturer datasheet to select input, output, and bypass capacitors, and place them close to their associated pins. The SY89824LHC operates from 3 V to 3.6 V, so verify the actual board supply range under startup, load, and temperature conditions. Connect the exposed pad using the recommended thermal and electrical land pattern rather than treating it as an optional copper feature.
Confirm source edge rate, input common-mode voltage, and HSTL termination at every destination before committing the topology. The outputs are specified to drive 50 ohm to ground without offset voltage, but correct termination alone does not guarantee signal integrity. Use the datasheet timing and loading characteristics to establish trace length, layer transitions, and receiver-load limitations.
Do not substitute a clock driver based only on the 64-pin TQFP package or the 1:22 fanout ratio. A valid drop-in alternative must also match the pin assignment, LVPECL and HSTL input thresholds, differential HSTL output arrangement, supply range, output loading, and timing behavior. Verify exposed-pad connectivity and output mapping on the manufacturer package drawing.
تعمیل کی معلومات
The available product information does not state the environmental, automotive, halogen-free, or conflict-minerals status. These attributes require confirmation from the manufacturer declaration or product documentation before qualification.