Microchip Technology

SY89824LHC - 1:22 HSTL Clock Driver | Microchip

部品番号: SY89824LHC ✓ 生産中
3 V to 3.6 V Vdss 64-pin TQFP with exposed pad Package
MOQ: 1 |

SY89824LHC 概要

The Microchip SY89824LHC is a 3.3 V, 1:22 low-voltage bus clock driver with two LVPECL or HSTL inputs and 22 differential HSTL output pairs, packaged in a 64-pin TQFP with exposed pad. It provides a fanout ratio of 1:22, maximum part-to-part skew of 200 ps, and HSTL outputs that drive 50 ohm terminations to ground without added offset voltage.

A clock buffer or fanout driver is a timing IC that distributes one or more input clock signals across multiple outputs. Clock buffers preserve signal amplitude and edge timing while reducing loading on the source. A differential clock driver additionally transmits a clock as a complementary pair, improving noise immunity and making the device suitable for high-speed backplanes, processor interfaces, telecommunications equipment, and clock-distribution networks.

The SY89824LHC accepts LVPECL and HSTL input signals, operates from a 3 V to 3.6 V supply, and produces 22 complementary HSTL output pairs. Its 1:22 fanout allows one source clock to support as many as 22 destination loads. The specified 200 ps maximum part-to-part skew helps maintain timing relationship between outputs when the device is used to distribute a common clock.

Each HSTL output can drive 50 ohm to ground with no offset voltage, reducing the termination complexity normally encountered with single-ended clock networks. The device is described as a high-performance, low-voltage bus clock driver designed for 3.3 V systems. Its 64-pin TQFP exposed-pad construction supports controlled heat dissipation and high-density printed-circuit-board layouts.

Typical applications include server and networking backplanes, telecommunications line cards, storage controllers, processor clock trees, test equipment, and other systems that require multiple low-voltage differential clock outputs. In a backplane, the SY89824LHC can distribute a source clock while isolating the source from the capacitance and termination load presented by multiple destinations.

PCB design should preserve controlled-impedance routing for differential clock paths and provide the power and ground connectivity required by the exposed pad. Use the pin-description and layout guidance in the manufacturer datasheet when assigning connections. Confirm input logic levels, output termination, supply decoupling, and trace topology in simulation before releasing the layout.

This product summary combines the device function, fanout, logic-level, package, and timing characteristics with practical PCB guidance, source links, and verified drop-in-equivalent status. It supports faster component selection without presenting an unsupported cross-reference or an unconfirmed replacement as a drop-in option.

ドロップイン代替品: SY89824LHC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

SY89824LHC 仕様

Product Type Clock fanout buffer and low-voltage bus clock driver
Fanout Ratio 1:22
Number of Differential Output Pairs 22 pairs
Input Logic Levels LVPECL and HSTL
Output Logic Level Differential HSTL
Supply Voltage Range 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Part-to-Part Skew 200 ps
Output Termination Capability 50 ohm to ground with no offset voltage
パッケージ 64-pin TQFP with exposed pad
実装タイプ Surface mount
Input Configuration 2 inputs

SY89824LHC 64-pin tqfp with exposed pad ピン配置ガイド

SY89824LHC (64-pin tqfp with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SY89824LHC の 64-pin tqfp with exposed pad パッケージピン配置図

詳細なピン配置データはありません: SY89824LHC.

詳細は データシート をご参照ください。

主な用途

SY89824LHC の用途: 6 件s: Networking Backplane Clock Distribution, Processor and Interface Clock Trees, Telecommunications Line-Card Clocking, Data Storage and Interface Systems, Test and Measurement Equipment, Industrial Control and Automation Systems.

🌐

Networking Backplane Clock Distribution

The SY89824LHC fits backplane clock distribution where a common source must feed many destinations without directly loading the clock producer. Its 1:22 fanout provides 22 differential HSTL output pairs, while LVPECL and HSTL inputs simplify interface with compatible low-voltage clock sources. The 200 ps maximum part-to-part skew helps preserve a defined relationship among outputs. Route each branch as a controlled-impedance differential pair, provide the specified 50 ohm grounding arrangement, and keep power and ground returns close to the device.

🖥️

Processor and Interface Clock Trees

A processor-based system can use the SY89824LHC when multiple interface or fabric clock branches require a single source to be repeated across up to 22 differential destinations. The device accepts LVPECL or HSTL clock inputs and emits complementary HSTL outputs, allowing a common distribution network to serve several clock domains. Its 200 ps maximum part-to-part skew must be included in the system timing budget. Confirm logic-level compatibility, edge-rate limits, and output termination for every destination before finalizing the clock topology.

📡

Telecommunications Line-Card Clocking

The SY89824LHC is applicable in telecommunications equipment that distributes a low-voltage common clock across numerous line-card functions. A 1:22 fanout reduces the number of separate source-driver channels required, while differential HSTL signaling supports noise-conscious clock routing. The 200 ps maximum part-to-part skew provides a defined distribution tolerance for system budgeting. Use controlled-impedance routing, maintain consistent return paths, and verify the 3 V to 3.6 V supply requirement at every operating condition.

💾

Data Storage and Interface Systems

The SY89824LHC can distribute a common reference clock to multiple storage, controller, or interface blocks when a 1:22 fanout and differential HSTL outputs are required. Its LVPECL and HSTL input flexibility supports different clock-source arrangements within the same board design. The 22-pair output capacity enables one package to serve many destinations, but each branch still requires correct termination and controlled geometry. Review source edge rate, destination thresholds, and the 200 ps maximum part-to-part skew in the complete timing analysis.

🔧

Test and Measurement Equipment

The SY89824LHC can be used in test and measurement equipment to distribute a low-voltage reference clock to many acquisition, sequencing, or comparison channels. Its 1:22 fanout and 22 differential HSTL output pairs allow a compact distribution stage, while the 200 ps maximum part-to-part skew assists instrument timing alignment. Keep clock and data routing physically separated from noisy analog sections, use controlled-impedance clock traces, and confirm that the instrument load and termination do not exceed the electrical operating conditions in the manufacturer datasheet.

🏭

Industrial Control and Automation Systems

The SY89824LHC can support industrial control systems that synchronize multiple processors, communication controllers, or data-conversion sections from a common clock. Differential HSTL outputs help preserve signal integrity across a larger PCB or backplane, and the 1:22 ratio reduces duplication of clock-generation circuitry. The device must operate from a 3 V to 3.6 V supply, and the maximum 200 ps part-to-part skew should be included in control-loop and communication timing margins. Validate startup, fault conditions, and termination continuity during hardware bring-up.

What is the Microchip SY89824LHC?
The Microchip SY89824LHC is a 3.3 V, 1:22 low-voltage bus clock driver with two LVPECL or HSTL inputs and 22 differential HSTL output pairs. According to the manufacturer datasheet, it is intended for high-performance clock distribution and can drive 50 ohm terminations to ground without adding offset voltage. The device is housed in a 64-pin TQFP package with an exposed pad.
What are the key specifications of SY89824LHC that engineers should know?
The SY89824LHC provides a 1:22 fanout ratio, 22 differential HSTL output pairs, LVPECL and HSTL input support, and a 3 V to 3.6 V operating supply range. Its maximum specified part-to-part skew is 200 ps. According to the manufacturer datasheet, the HSTL outputs can drive 50 ohm to ground with no offset voltage, making the device suitable for distributed low-voltage clock networks.
What is the operating voltage of SY89824LHC?
The SY89824LHC operates from 3 V to 3.6 V and is identified as a 3.3 V clock driver. According to the manufacturer datasheet, the device accepts LVPECL and HSTL inputs and generates differential HSTL output pairs. The supply range is a central design constraint because the clock network, termination arrangement, and input thresholds must all be compatible with a 3.3 V implementation.
How many clock outputs does SY89824LHC provide?
The SY89824LHC provides 22 differential HSTL output pairs, corresponding to a 1:22 clock fanout. According to the manufacturer datasheet, the input stage accepts LVPECL and HSTL signals. This high fanout allows a common source clock to reach numerous destinations while limiting the electrical loading placed on the original clock source.
What input logic levels are supported by SY89824LHC?
The SY89824LHC accepts both LVPECL and HSTL input signals. According to the manufacturer datasheet, these low-voltage differential clock inputs feed a device that produces 22 differential HSTL output pairs. Input compatibility is important in mixed clock trees, but the source amplitude, termination, common-mode voltage, and edge rate still need to match the device requirements.
What output logic level does SY89824LHC use?
The SY89824LHC uses differential HSTL for its 22 output pairs. According to the manufacturer datasheet, the outputs are designed to drive 50 ohm to ground with no offset voltage. This output arrangement is intended for low-voltage systems where a single-ended clock distribution would be more susceptible to noise or where complementary clock signaling is preferred.
What is the maximum part-to-part skew of SY89824LHC?
The maximum specified part-to-part skew of the SY89824LHC is 200 ps. According to the manufacturer datasheet, this figure describes the timing relationship among the distributed outputs. It is important when evaluating clock-to-clock alignment, interface timing margins, and the bandwidth available for downstream source-synchronous or parallel data transfers.
Where can I download the SY89824LHC datasheet PDF?
The SY89824LHC datasheet can be reached through the manufacturer-linked datasheet entry on Octopart at https://octopart.com/datasheet/microchip/SY89824LHC. Use the document to verify the complete pin assignment, electrical characteristics, absolute maximum ratings, recommended application circuit, and exposed-pad land pattern before committing the PCB layout.
Where can I find the SY89824LHC pinout?
The SY89824LHC pinout is defined in the manufacturer datasheet for its 64-pin TQFP exposed-pad package. Use the pin-description table and package drawing together, because the exposed pad is not a substitute for a numbered signal pin. Assign power, ground, clocks, and exposed-pad connections exactly as shown in the manufacturer documentation.
Where can I buy SY89824LHC online?
The SY89824LHC can be requested through the Request a Quote form on this XAIPART product page. Provide the required quantity, target reel or tray format, and delivery location to obtain current commercial terms. The form is the appropriate route for stock confirmation, order processing, and lead-time information without relying on a static price.
What is the price of SY89824LHC?
Current commercial pricing for the SY89824LHC should be obtained through the Request a Quote form on this page. The structured price evidence contains no qualifying quantity-break listing for this exact MPN, so this page does not publish a potentially stale price figure. Submit the required quantity and packaging information to receive current quotation terms.
What is the lead time and stock status for SY89824LHC?
Current stock status and lead time for the SY89824LHC should be confirmed through the Request a Quote form on this page. A distributor result associated with the exact MPN does not by itself establish the quantity available for every order configuration. State the required quantity, date code preference, and shipment destination when requesting the quotation.
SY89824LHC versus a conventional clock buffer: which is better for a backplane?
The SY89824LHC is preferable when a backplane design requires a 1:22 fanout, LVPECL or HSTL inputs, and 22 differential HSTL output pairs. Its 200 ps maximum part-to-part skew is also useful when outputs must retain a defined relationship. A conventional buffer may be adequate for lower fanout, but the required channel count, logic level, termination, and skew must be compared.
When should I choose SY89824LHC over a lower-fanout clock driver?
Choose the SY89824LHC when the design must distribute one clock source to as many as 22 differential destinations in a 3.3 V system. It is especially relevant when the clock network uses LVPECL or HSTL inputs and HSTL outputs with 50 ohm grounding. A lower-fanout driver may be preferable when fewer loads, simpler routing, or lower cost are the dominant requirements.
Is SY89824LHC suitable for a 3.3 V processor clock tree?
The SY89824LHC can suit a 3.3 V processor clock tree when the required fanout, logic levels, and timing budget match its characteristics. It accepts LVPECL and HSTL inputs and provides 22 differential HSTL output pairs, with maximum part-to-part skew of 200 ps. Confirm that the processor interface permits differential HSTL clocking and that every output has the required termination.
What can replace SY89824LHC?
No verified pin-to-pin drop-in replacement for the SY89824LHC was identified. A valid replacement must match the 64-pin TQFP exposed-pad footprint, 1:22 fanout, LVPECL and HSTL input support, 22 differential HSTL outputs, 3.3 V supply, and required skew characteristics. Use the Request a Quote form to discuss sourcing and qualification options for this exact device.
Is there a cross-brand equivalent for SY89824LHC?
No cross-brand drop-in equivalent for the SY89824LHC is confirmed by the available cross-reference information. Sharing the 64-pin TQFP package alone is insufficient because a substitute must also reproduce the 1:22 fanout, input logic levels, differential HSTL outputs, termination behavior, and timing specifications. Do not approve a replacement solely from package matching; validate its pinout and AC timing first.

エンジニアリング参考データ: SY89824LHC — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY89824LHC when a 3.3 V design must distribute one LVPECL or HSTL source clock to as many as 22 differential HSTL destinations. It is a strong fit for backplanes, processor clock trees, telecommunications line cards, and multi-channel test equipment where 22 output pairs and a specified 200 ps maximum part-to-part skew are important. Select a lower-fanout driver when fewer destinations are needed or when lower channel-count complexity takes priority. Do not choose a cross-brand substitute solely because it uses a 64-pin TQFP footprint; the pin map, logic levels, output loading, termination behavior, exposed pad, and timing characteristics must all be equivalent. This page therefore does not present an unconfirmed drop-in replacement. Request the exact MPN for quotation, current availability, and production qualification support.

代替品との比較

パラメータ この製品
Product Type Clock fanout buffer and low-voltage bus clock driver
Brand Microchip Technology
Package 64-pin TQFP with exposed pad
Fanout Ratio 1:22
Differential Output Pairs 22 pairs
Input Logic Levels LVPECL and HSTL
Output Logic Level Differential HSTL
Supply Voltage Range 3 V to 3.6 V
Maximum Part-to-Part Skew 200 ps
Output Termination Capability 50 ohm to ground with no offset voltage

主な差別化要因

  • High fanout in one package (vs Lower-fanout clock drivers)
  • Flexible source logic-level support (vs Single-input-logic clock buffers)
  • Defined output timing relationship (vs General-purpose distribution buffers)

設計ノート

Route all 22 differential HSTL output pairs as controlled-impedance traces, with continuous reference planes and symmetrical routing where practical. Keep the clock distribution away from switching nodes and high-current return paths. The 1:22 fanout makes trace-length balancing and uniform termination important because one marginal branch can affect source-to-destination clock quality across the network.

Use the manufacturer datasheet to select input, output, and bypass capacitors, and place them close to their associated pins. The SY89824LHC operates from 3 V to 3.6 V, so verify the actual board supply range under startup, load, and temperature conditions. Connect the exposed pad using the recommended thermal and electrical land pattern rather than treating it as an optional copper feature.

Confirm source edge rate, input common-mode voltage, and HSTL termination at every destination before committing the topology. The outputs are specified to drive 50 ohm to ground without offset voltage, but correct termination alone does not guarantee signal integrity. Use the datasheet timing and loading characteristics to establish trace length, layer transitions, and receiver-load limitations.

Do not substitute a clock driver based only on the 64-pin TQFP package or the 1:22 fanout ratio. A valid drop-in alternative must also match the pin assignment, LVPECL and HSTL input thresholds, differential HSTL output arrangement, supply range, output loading, and timing behavior. Verify exposed-pad connectivity and output mapping on the manufacturer package drawing.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product information does not state the environmental, automotive, halogen-free, or conflict-minerals status. These attributes require confirmation from the manufacturer declaration or product documentation before qualification.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SY89824LHC datasheet SY89824LHC pinout SY89824LHC datasheet pdf SY89824LHC equivalent SY89824LHC replacement SY89824LHC cross reference SY89824LHC footprint SY89824LHC price SY89824LHC stock Microchip SY89824LHC SY89824LHC 1:22 clock driver SY89824LHC 64 TQFP pinout

関連部品&用語

Microchip Technology SY89824LHC clock buffer clock fanout buffer low-voltage bus clock driver clock and timing IC integrated circuit semiconductor LVPECL HSTL differential clock driver clock distribution 1:22 fanout part-to-part skew 64-pin TQFP TQFP family exposed pad surface-mount package 3.3 V power supply controlled-impedance routing 50 ohm termination networking backplane processor clock tree telecommunications equipment
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示