TAS5010PFBR - 2-Channel 3.3V PWM Audio Processor | Texas Instruments
N.º de pieza: TAS5010PFBR ✓ ActivoTAS5010PFBR Descripción general
A digital audio PWM processor is an interface and signal-processing IC positioned between a digital audio source and a PWM power-output stage. It forms the modulation and control portion of a True Digital Audio Amplifier architecture, while a companion device such as the TAS5100 performs the high-current power amplification stage. This division keeps sensitive PCM processing separate from the switching power stage.
The TAS5010PFBR provides a device dynamic range of 96 dB. A related TAS5100-based system is measured at 93 dB dynamic range at the speaker terminals. The processor also supports an audio system configuration capable of delivering 30 W RMS, with total harmonic distortion plus noise specified as 0.08% at 1 kHz when measured at that output condition. Its two-channel architecture supports left and right digital audio reproduction from one integrated control device.
Internally, the device accepts a serial PCM digital-audio stream and performs the digital signal processing and PWM modulation required by the True Digital Audio Amplifier system. The resulting 3.3 V PWM output is not intended to drive a loudspeaker directly; it interfaces with a compatible PWM power-output device. This division of functions allows digital control, modulation, and power conversion to be optimized independently.
Typical uses include powered speakers, compact home-audio systems, digital active speakers, multimedia speaker platforms, and other two-channel audio products that benefit from a digital signal path. Designers should pair the processor with a compatible PWM power stage and implement the external components and control interface specified by the manufacturer application circuit.
PCB design should preserve short, controlled routes for the 3.3 V PWM signals because these edges represent the audio output waveform. Place associated bypassing and decoupling capacitors close to the supply pins, while keeping high-current switching paths in the companion output stage physically separate from sensitive PCM input routing.
This page combines the device architecture, verified performance markers, package details, replacement analysis, and practical integration guidance to support faster component selection and first-board bring-up. It is intended to clarify how the TAS5010PFBR fits within a True Digital Audio Amplifier design without confusing the processor output stage with a direct speaker driver.
Alternativas directas para TAS5010PFBR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TAS5010PFBR (mismo factor de forma y huella) — difiere en Package.
TAS5010IPFBR
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
TAS5010PFBRG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TAS5001PFBRG4
✅ Sustitución directaConsulte el precio
Ver hoja de datos →TAS5001PFBRG4
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →TAS5010PFB
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →TAS5010PFBR Valores máximos y características eléctricas
| Product Type | Digital Audio PWM Processor |
| Number of Audio Channels | 2 channels |
| Encapsulado | 48-pin TQFP, 7 mm x 7 mm |
| Tipo de montaje | Surface mount |
| Digital Audio Input | Serial PCM |
| PWM Output Level | 3.3 V |
| Device Dynamic Range | 96 dB |
| TAS5100 System Dynamic Range | 93 dB at speaker terminals |
| Total Harmonic Distortion plus Noise | 0.08% at 1 kHz to 30 W RMS |
| Maximum System Output Power | 30 W RMS |
| Power-Stage Architecture | Separate PWM power output stage required |
Guía de configuración de pines de TAS5010PFBR 48-pin tqfp, 7 mm x 7 mm
Configuración de pines para TAS5010PFBR (encapsulado 48-pin tqfp, 7 mm x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para TAS5010PFBR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TAS5010PFBR es adecuado para 6 aplicacións: Two-Channel Powered Speakers, Digital Active Speaker Platforms, Multimedia Speaker Systems, Home Audio and Compact Stereo, Digital Audio Amplifier Reference Designs, Digital Signal Processing Education.
Two-Channel Powered Speakers
The TAS5010PFBR fits two-channel powered-speaker systems because it processes left and right serial PCM audio and generates a pair of 3.3 V PWM streams for a compatible power-output stage. Its 2-channel organization reduces the need for separate audio processors in a stereo enclosure. The 96 dB device dynamic range provides a high-quality digital source for the system, while the specified 0.08% THD+N at 1 kHz provides a clear distortion target when the processor is paired with the intended 30 W RMS system configuration. Designers should still evaluate the complete speaker, power-stage, filter, and enclosure response rather than relying on a processor-only figure.
Recomendado
Digital Active Speaker Platforms
A digital active-speaker platform can place the TAS5010PFBR ahead of a TAS5100-class PWM power device to retain a digital path from the source to the speaker drive stage. The processor accepts serial PCM audio and converts it into 3.3 V PWM audio, making it appropriate for systems in which analog interstage routing would add noise or complexity. The manufacturer reports 93 dB dynamic range for a TAS5100 system measured at the speaker terminals, which is more representative of end-to-end performance than the 96 dB processor-only value. Final validation should include the selected power stage, output filters, speaker impedance, and enclosure loading.
Recomendado
Multimedia Speaker Systems
TAS5010PFBR is suitable for multimedia speaker systems that receive digital audio from a host processor and require a reproducible two-channel amplification architecture. The serial PCM interface supports integration into a digital audio product, while the 3.3 V PWM outputs connect to a compatible power stage rather than directly to the speaker. This arrangement can simplify synchronization between channels and keep the audio-modulation function separate from high-current switching. For USB, Bluetooth, or network-audio products, the upstream codec or interface must provide the PCM format expected by the TAS5010, including the required clocking and sample-rate configuration.
Recomendado
Home Audio and Compact Stereo
The TAS5010PFBR can support compact home-audio and stereo products that need high-quality digital modulation with two-channel processing. Its 48-pin TQFP package provides a reasonably compact surface-mount solution, while its dedicated PWM architecture avoids routing a conventional analog audio signal through the board. The 30 W RMS system condition and 0.08% THD+N at 1 kHz provide useful design targets when selecting the companion power stage and output filter. Because the processor does not directly drive speakers, designers must include the complete manufacturer-recommended output network and validate thermal and acoustic performance in the finished enclosure.
Recomendado
Digital Audio Amplifier Reference Designs
TAS5010PFBR is appropriate for evaluating the Texas Instruments True Digital Audio Amplifier architecture in a reference-design environment. The device handles serial PCM input and 3.3 V PWM modulation, enabling the power stage, output filter, and speaker interface to be studied as separate blocks. This separation makes it easier to identify whether distortion or efficiency limitations originate in the processor, power converter, passive filter, or acoustic load. The stated 96 dB device dynamic range and 93 dB terminal-level system dynamic range provide paired checkpoints for bench validation, but production acceptance should use the complete system configuration specified by the manufacturer.
Recomendado
Digital Signal Processing Education
The TAS5010PFBR can serve as a practical education platform for studying digital-to-PWM audio conversion because it separates PCM processing from speaker power amplification. Students can observe how a serial PCM stream becomes a 3.3 V PWM waveform and how that waveform interacts with a TAS5100 power stage and passive output filter. The two-channel architecture permits direct comparison of left and right signal paths, while the documented 0.08% THD+N condition supplies a measurable bench objective. A laboratory implementation should still observe the manufacturer's decoupling, clocking, grounding, and output-network requirements rather than improvising a generic speaker connection.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TAS5010PFBR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TAS5010IPFBR | TAS5010PFBRG4 | TAS5001PFBRG4 | TAS5001PFBR | TAS5010PFB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Product Type | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor |
Diferenciadores clave
- Two-channel digital audio processing in one package (frente a TAS5001PFBRG4)
- Clear True Digital Audio Amplifier architecture (frente a TDA7430)
- Identified terminal-level system performance (frente a TAS5010IPFBR)
- Defined 30 W RMS system distortion condition (frente a TAS5010PFB)
Notas de diseño
Treat the 3.3 V PWM outputs as high-edge-rate signals even though their nominal amplitude is only 3.3 V. Route them directly and symmetrically to the compatible power-output device, avoid test pads and long stubs where practical, and maintain the differential timing relationship between the two channels. Keep PCM clock and data traces away from the PWM paths and power-stage switching nodes to reduce coupling into the digital audio input.
Place all required bypass and decoupling capacitors close to their associated TAS5010PFBR supply pins, and follow the capacitor values and placement shown in the manufacturer reference circuit. The processor generates the 3.3 V PWM stream but does not supply speaker power; size and regulate the rails for the TAS5010 and its companion output device separately. Check startup, clock sequencing, and rail interaction because audio processors can be sensitive to an unstable digital supply.
Preserve the required PCM clock-to-data timing and route clock and data as a controlled source-synchronous interface. Avoid adding large test fixtures or long branch stubs to the digital input, and validate signal integrity with an oscilloscope or logic analyzer at the processor pins. The 96 dB device dynamic range describes the audio converter, but incorrect digital timing can still corrupt the stream and prevent the downstream power stage from reproducing the intended waveform.
Do not connect the 3.3 V PWM output directly to a loudspeaker. The TAS5010PFBR is the modulation and control device in a True Digital Audio Amplifier system, and a compatible PWM power-output stage plus the required output filter must provide speaker current. Also verify the exact 48-pin assignments, supply requirements, clock source, and supported audio configuration from the manufacturer datasheet before releasing a PCB for fabrication.
Información de cumplimiento
The G4 family ordering option is documented, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact TAS5010PFBR ordering code.