Texas Instruments

TAS5010PFBR - 2-Channel 3.3V PWM Audio Processor | Texas Instruments

MPN: TAS5010PFBR ✓ פעיל
48-pin TQFP, 7 mm x 7 mm Package
כמות הזמנה מינימלית: 1 |

TAS5010PFBR סקירה

The Texas Instruments TAS5010PFBR is a 2-channel digital audio PWM processor that accepts serial PCM audio data and converts it into a 3.3 V PWM audio stream for a True Digital Audio Amplifier system. It is packaged in a 48-pin TQFP measuring 7 mm by 7 mm and operates across two audio channels.

A digital audio PWM processor is an interface and signal-processing IC positioned between a digital audio source and a PWM power-output stage. It forms the modulation and control portion of a True Digital Audio Amplifier architecture, while a companion device such as the TAS5100 performs the high-current power amplification stage. This division keeps sensitive PCM processing separate from the switching power stage.

The TAS5010PFBR provides a device dynamic range of 96 dB. A related TAS5100-based system is measured at 93 dB dynamic range at the speaker terminals. The processor also supports an audio system configuration capable of delivering 30 W RMS, with total harmonic distortion plus noise specified as 0.08% at 1 kHz when measured at that output condition. Its two-channel architecture supports left and right digital audio reproduction from one integrated control device.

Internally, the device accepts a serial PCM digital-audio stream and performs the digital signal processing and PWM modulation required by the True Digital Audio Amplifier system. The resulting 3.3 V PWM output is not intended to drive a loudspeaker directly; it interfaces with a compatible PWM power-output device. This division of functions allows digital control, modulation, and power conversion to be optimized independently.

Typical uses include powered speakers, compact home-audio systems, digital active speakers, multimedia speaker platforms, and other two-channel audio products that benefit from a digital signal path. Designers should pair the processor with a compatible PWM power stage and implement the external components and control interface specified by the manufacturer application circuit.

PCB design should preserve short, controlled routes for the 3.3 V PWM signals because these edges represent the audio output waveform. Place associated bypassing and decoupling capacitors close to the supply pins, while keeping high-current switching paths in the companion output stage physically separate from sensitive PCM input routing.

This page combines the device architecture, verified performance markers, package details, replacement analysis, and practical integration guidance to support faster component selection and first-board bring-up. It is intended to clarify how the TAS5010PFBR fits within a True Digital Audio Amplifier design without confusing the processor output stage with a direct speaker driver.

חלופות תחליף ישיר עבור TAS5010PFBR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TAS5010PFBR (אותו גורם צורה וטביעת רגל) — שונים ב Package.

Texas Instruments
Package: 48-TQFP (7x7 mm)
השווה עם TAS5010PFBR →
Texas Instruments
Package: 48-pin TQFP (7 x 7 mm)
השווה עם TAS5010PFBR →

TAS5010IPFBR

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 48-TQFP (7x7)
Same TAS5010 family and 48-TQFP footprint; the I ordering option differs in device ordering and temperature-grade designation, with no measured core performance difference established.

📋 חלופה להתייחסות (לא בקטלוג)

TAS5010PFBRG4

✅ Drop-In
📦 48-TQFP (7x7)
Same TAS5010 family and 48-TQFP footprint; G4 identifies the manufacturer's environmental finish option, while core audio performance remains unchanged.

📋 חלופה להתייחסות (לא בקטלוג)

TAS5001PFBRG4

✅ Drop-In
Texas Instruments
📦 48-TQFP (7x7)
Digital Audio PWM Processor · 2 · 96 dB · 0.08% at 1 kHz · 48-TQFP (7x7 mm) · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TAS5001PFBRG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 48-TQFP (7x7)
Digital Audio PWM Processor · 2 · 96 dB · 0.08% at 1 kHz · 48-TQFP (7x7 mm) · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TAS5010PFB

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 48-TQFP (7x7)
Digital audio PWM processor · Texas Instruments · 2 channels · 96 dB · I2S · Serial PCM digital audio stream · 3.3 V PWM audio stream · 0.08% at 1 kHz

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TAS5010PFBR דירוגים מרביים ומאפיינים חשמליים

Product Type Digital Audio PWM Processor
Number of Audio Channels 2 channels
מארז 48-pin TQFP, 7 mm x 7 mm
סוג הרכבה Surface mount
Digital Audio Input Serial PCM
PWM Output Level 3.3 V
Device Dynamic Range 96 dB
TAS5100 System Dynamic Range 93 dB at speaker terminals
Total Harmonic Distortion plus Noise 0.08% at 1 kHz to 30 W RMS
Maximum System Output Power 30 W RMS
Power-Stage Architecture Separate PWM power output stage required

מדריך תצורת פינים של TAS5010PFBR 48-pin tqfp, 7 mm x 7 mm

תצורת פינים עבור TAS5010PFBR (מארזת 48-pin tqfp, 7 mm x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 48-pin tqfp, 7 mm x 7 mm עבור TAS5010PFBR

אין נתוני פריסת פינים מפורטים עבור TAS5010PFBR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TAS5010PFBR מתאים עבור 6 יישוםs: Two-Channel Powered Speakers, Digital Active Speaker Platforms, Multimedia Speaker Systems, Home Audio and Compact Stereo, Digital Audio Amplifier Reference Designs, Digital Signal Processing Education.

🎧

Two-Channel Powered Speakers

The TAS5010PFBR fits two-channel powered-speaker systems because it processes left and right serial PCM audio and generates a pair of 3.3 V PWM streams for a compatible power-output stage. Its 2-channel organization reduces the need for separate audio processors in a stereo enclosure. The 96 dB device dynamic range provides a high-quality digital source for the system, while the specified 0.08% THD+N at 1 kHz provides a clear distortion target when the processor is paired with the intended 30 W RMS system configuration. Designers should still evaluate the complete speaker, power-stage, filter, and enclosure response rather than relying on a processor-only figure.

🔊

Digital Active Speaker Platforms

A digital active-speaker platform can place the TAS5010PFBR ahead of a TAS5100-class PWM power device to retain a digital path from the source to the speaker drive stage. The processor accepts serial PCM audio and converts it into 3.3 V PWM audio, making it appropriate for systems in which analog interstage routing would add noise or complexity. The manufacturer reports 93 dB dynamic range for a TAS5100 system measured at the speaker terminals, which is more representative of end-to-end performance than the 96 dB processor-only value. Final validation should include the selected power stage, output filters, speaker impedance, and enclosure loading.

🖥️

Multimedia Speaker Systems

TAS5010PFBR is suitable for multimedia speaker systems that receive digital audio from a host processor and require a reproducible two-channel amplification architecture. The serial PCM interface supports integration into a digital audio product, while the 3.3 V PWM outputs connect to a compatible power stage rather than directly to the speaker. This arrangement can simplify synchronization between channels and keep the audio-modulation function separate from high-current switching. For USB, Bluetooth, or network-audio products, the upstream codec or interface must provide the PCM format expected by the TAS5010, including the required clocking and sample-rate configuration.

🏠

Home Audio and Compact Stereo

The TAS5010PFBR can support compact home-audio and stereo products that need high-quality digital modulation with two-channel processing. Its 48-pin TQFP package provides a reasonably compact surface-mount solution, while its dedicated PWM architecture avoids routing a conventional analog audio signal through the board. The 30 W RMS system condition and 0.08% THD+N at 1 kHz provide useful design targets when selecting the companion power stage and output filter. Because the processor does not directly drive speakers, designers must include the complete manufacturer-recommended output network and validate thermal and acoustic performance in the finished enclosure.

🔬

Digital Audio Amplifier Reference Designs

TAS5010PFBR is appropriate for evaluating the Texas Instruments True Digital Audio Amplifier architecture in a reference-design environment. The device handles serial PCM input and 3.3 V PWM modulation, enabling the power stage, output filter, and speaker interface to be studied as separate blocks. This separation makes it easier to identify whether distortion or efficiency limitations originate in the processor, power converter, passive filter, or acoustic load. The stated 96 dB device dynamic range and 93 dB terminal-level system dynamic range provide paired checkpoints for bench validation, but production acceptance should use the complete system configuration specified by the manufacturer.

🧑‍🏫

Digital Signal Processing Education

The TAS5010PFBR can serve as a practical education platform for studying digital-to-PWM audio conversion because it separates PCM processing from speaker power amplification. Students can observe how a serial PCM stream becomes a 3.3 V PWM waveform and how that waveform interacts with a TAS5100 power stage and passive output filter. The two-channel architecture permits direct comparison of left and right signal paths, while the documented 0.08% THD+N condition supplies a measurable bench objective. A laboratory implementation should still observe the manufacturer's decoupling, clocking, grounding, and output-network requirements rather than improvising a generic speaker connection.

סיכום מוצרים מומלצים

TAS5100 Compatible PWM power-output stage בשימוש ב-: Two-Channel Powered Speakers, Digital Active Speaker Platforms, Multimedia Speaker Systems, Home Audio and Compact Stereo, Digital Audio Amplifier Reference Designs, Digital Signal Processing Education TAS5010IPFBR Same-family processor option בשימוש ב-: Two-Channel Powered Speakers, Home Audio and Compact Stereo TAS5010PFBRG4 Same-family processor variant בשימוש ב-: Digital Active Speaker Platforms TAS5001PFBRG4 Texas Instruments בשימוש ב-: Multimedia Speaker Systems TAS5010PFB Texas Instruments בשימוש ב-: Digital Audio Amplifier Reference Designs TAS5001PFBR Texas Instruments בשימוש ב-: Digital Signal Processing Education
What is the Texas Instruments TAS5010PFBR?
The Texas Instruments TAS5010PFBR is a 2-channel digital audio PWM processor in a 48-pin TQFP package. It accepts a serial PCM digital-audio stream and converts it into a 3.3 V PWM audio stream for a compatible True Digital Audio Amplifier power stage. According to the manufacturer datasheet, the processor is not a direct speaker driver; it performs the digital modulation and control functions ahead of a separate PWM output device.
What are the key specifications of TAS5010PFBR that engineers should know?
The TAS5010PFBR combines two audio channels, serial PCM input, 3.3 V PWM output, 96 dB device dynamic range, and a 48-pin 7 mm by 7 mm TQFP package. The manufacturer datasheet also identifies 0.08% THD+N at 1 kHz for a 30 W RMS system condition and reports 93 dB dynamic range for a TAS5100-based system at the speaker terminals. These figures describe the processor and its intended system architecture rather than a stand-alone speaker output.
Can TAS5010PFBR drive a speaker directly?
No, the TAS5010PFBR is designed to drive a separate PWM power-output stage rather than a loudspeaker directly. It converts serial PCM audio into a 3.3 V PWM audio stream, and a companion device such as the TAS5100 performs the high-current amplification stage. The manufacturer datasheet identifies this arrangement as a True Digital Audio Amplifier system. Designing a direct speaker connection around the processor would therefore be incorrect.
Where can I download the TAS5010PFBR datasheet PDF?
The TAS5010PFBR datasheet PDF can be obtained through the manufacturer documentation identified for the TAS5010 device or through the linked datasheet record on this page. The document describes the True Digital Audio Amplifier architecture, PCM input interface, 3.3 V PWM output, 96 dB device dynamic range, 93 dB measured system dynamic range, and 0.08% THD+N at the stated 30 W RMS test condition.
Where is the pinout for the 48-pin TAS5010PFBR?
The authoritative pinout is in the pin-description and package diagrams of the Texas Instruments TAS5010 manufacturer datasheet. The TAS5010PFBR uses a 48-pin TQFP package, so assignments should be transcribed from that document before assigning PCB nets. Use the exact signal names and exposed-pad or supply instructions shown there rather than inferring connectivity from a generic 48-pin package drawing.
TAS5010PFBR vs TAS5010IPFBR - which is better?
The choice between TAS5010PFBR and TAS5010IPFBR depends on the required environmental grade and the operating conditions stated for each ordering option. Both appear in the same Texas Instruments TAS5010 family and use the 48-pin TQFP format, making the family relationship useful for PCB planning. Confirm the manufacturer temperature grade, production status, and complete electrical limits before treating either ordering code as an interchangeable replacement.
When should I choose TAS5010PFBR instead of TAS5001PFBRG4?
Choose the TAS5010PFBR when the design specifically targets the TAS5010 True Digital Audio Amplifier signal chain and its associated configuration requirements. The cross-reference information identifies TAS5001PFBRG4 as a related comparison part, but the two devices belong to different positions in the broader TAS5000 family and may differ in supported channels, filtering, modulation behavior, and system configuration. Confirm the complete pin and functional tables before selecting a substitute.
What is the best drop-in replacement for TAS5010PFBR?
The closest family drop-in candidates identified for the TAS5010PFBR are same-package Texas Instruments ordering variants such as TAS5010IPFBR and TAS5010PFBRG4, subject to the applicable temperature-grade and production-status requirements. No cross-brand drop-in replacement was established by the manufacturer cross-reference information. Because digital audio processors also require matching configuration, firmware, and interface behavior, verify every pin and control function before approving a replacement.
Is TAS5010PFBR the same as TAS5001PFBRG4?
No, the TAS5010PFBR and TAS5001PFBRG4 are related Texas Instruments audio processors but should not be treated as identical without a full compatibility review. Both are listed in 48-pin TQFP packages, but family position alone does not guarantee pin-to-pin functional equivalence. The manufacturer documentation should be compared for channel count, PCM input, PWM output behavior, filtering, control registers, clocking, and external circuitry before using one as a replacement.
What is the difference between TAS5010PFBR and TDA7430?
The TAS5010PFBR is a True Digital Audio Amplifier digital audio PWM processor, while the TDA7430 appears in comparison listings as a separate audio signal-processing product. The TDA7430 is not a verified 48-pin pin-to-pin substitute for the TAS5010PFBR in the available cross-reference information. Use the manufacturer data for each device to determine whether the required signal path is digital PCM-to-PWM or an analog audio-control architecture.
How should PWM routing be handled on a TAS5010PFBR PCB?
Route the 3.3 V PWM signals as short and controlled as practical because their sharp edges form the audio output waveform. Place supply bypassing close to the relevant device pins and separate sensitive PCM input traces from PWM and power-stage switching paths. The principal layout constraint is to preserve signal timing and margin between the processor and its compatible PWM output device while avoiding unintended coupling into the digital input.
How much dynamic range does the TAS5010PFBR audio system provide?
The TAS5010PFBR device is specified at 96 dB dynamic range, while the manufacturer datasheet reports 93 dB dynamic range for a TAS5100 system measured at the speaker terminals. The two values describe different measurement boundaries: the first refers to the processor device, and the second includes the complete output system. System designers should use the terminal-level figure when assessing audible system performance.
What power and distortion performance is associated with TAS5010PFBR?
The manufacturer datasheet specifies 0.08% THD+N at 1 kHz for an output condition up to 30 W RMS in the intended system. That value depends on the complete signal chain, including the compatible PWM power stage and its operating configuration. It should not be interpreted as an intrinsic 30 W capability of the TAS5010PFBR package, because the processor itself produces a 3.3 V PWM stream rather than directly delivering speaker power.
Where can I request a quote and current lead time for TAS5010PFBR?
Use the Request a Quote form on this page to request current commercial terms, quantity availability, and lead time for TAS5010PFBR. The form is the appropriate route for a quote-first purchase of this catalog component and for confirming the exact package, reel quantity, and production status needed for the target build. Engineering samples and production quantities can be specified in the same request.
Is TAS5010PFBR suitable for powered speakers and digital active speakers?
Yes, TAS5010PFBR is suitable for two-channel powered-speaker and digital active-speaker architectures that use a True Digital Audio Amplifier signal chain. Its serial PCM input, 3.3 V PWM output, and 96 dB device dynamic range support digital audio reproduction, while a separate PWM power device provides the speaker current. The design must follow the manufacturer reference configuration and use a compatible output-stage component.

נתוני עזר הנדסיים עבור TAS5010PFBR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose TAS5010PFBR when the design needs a 2-channel serial-PCM-to-PWM processor for a True Digital Audio Amplifier architecture. It is especially appropriate when the system will use a compatible TAS5100-class power stage and the design goals include 96 dB processor dynamic range and a documented 0.08% THD+N system condition. TAS5010IPFBR or TAS5010PFBRG4 may fit the same physical design when their environmental grade or finish designation better matches the product requirements. TAS5001PFBRG4 is reasonable only after its filtering, control, and configuration behavior has been checked against the intended system. The TDA7430 belongs to a different audio-processing approach and should not be treated as a direct drop-in choice. In every case, verify the 48-pin assignment, digital timing, supply requirements, firmware configuration, and compatibility with the chosen PWM output stage.

השוואה עם חלופות

פרמטר מוצר זה TAS5010IPFBR TAS5010PFBRG4 TAS5001PFBRG4 TAS5001PFBR TAS5010PFB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 48-TQFP (7x7) 48-TQFP (7x7) - same 48-TQFP (7x7) - same 48-TQFP (7x7) - same 48-TQFP (7x7) - same 48-TQFP (7x7) - same
Product Type Digital Audio PWM Processor Digital Audio PWM Processor Digital Audio PWM Processor Digital Audio PWM Processor Digital Audio PWM Processor Digital Audio PWM Processor

מבדילים עיקריים

  • Two-channel digital audio processing in one package (לעומתTAS5001PFBRG4)
  • Clear True Digital Audio Amplifier architecture (לעומתTDA7430)
  • Identified terminal-level system performance (לעומתTAS5010IPFBR)
  • Defined 30 W RMS system distortion condition (לעומתTAS5010PFB)

הערות תכנון

Treat the 3.3 V PWM outputs as high-edge-rate signals even though their nominal amplitude is only 3.3 V. Route them directly and symmetrically to the compatible power-output device, avoid test pads and long stubs where practical, and maintain the differential timing relationship between the two channels. Keep PCM clock and data traces away from the PWM paths and power-stage switching nodes to reduce coupling into the digital audio input.

Place all required bypass and decoupling capacitors close to their associated TAS5010PFBR supply pins, and follow the capacitor values and placement shown in the manufacturer reference circuit. The processor generates the 3.3 V PWM stream but does not supply speaker power; size and regulate the rails for the TAS5010 and its companion output device separately. Check startup, clock sequencing, and rail interaction because audio processors can be sensitive to an unstable digital supply.

Preserve the required PCM clock-to-data timing and route clock and data as a controlled source-synchronous interface. Avoid adding large test fixtures or long branch stubs to the digital input, and validate signal integrity with an oscilloscope or logic analyzer at the processor pins. The 96 dB device dynamic range describes the audio converter, but incorrect digital timing can still corrupt the stream and prevent the downstream power stage from reproducing the intended waveform.

Do not connect the 3.3 V PWM output directly to a loudspeaker. The TAS5010PFBR is the modulation and control device in a True Digital Audio Amplifier system, and a compatible PWM power-output stage plus the required output filter must provide speaker current. Also verify the exact 48-pin assignments, supply requirements, clock source, and supported audio configuration from the manufacturer datasheet before releasing a PCB for fabrication.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The G4 family ordering option is documented, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact TAS5010PFBR ordering code.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TAS5010PFBR datasheet TAS5010PFBR datasheet pdf TAS5010PFBR pinout TAS5010PFBR schematic TAS5010PFBR equivalent TAS5010PFBR replacement TAS5010PFBR cross reference TAS5010PFBR vs TAS5010IPFBR TAS5010PFBR 48 TQFP pinout TAS5010 3.3V PWM audio processor TAS5010 powered speaker application TAS5010PFBR price TAS5010PFBR stock Texas Instruments TAS5010PFBR TAS5010PFBR replacement request quote

רכיבים ומונחים קשורים

Texas Instruments TAS5010PFBR TAS5010IPFBR TAS5010PFBRG4 TAS5001PFBRG4 TAS5001PFBR TAS5010PFB TAS5100 TDA7430 Digital Audio PWM Processor True Digital Audio Amplifier PCM PWM Audio DSP 48-TQFP TQFP package family Surface mount Stereo audio Digital active speaker 96 dB dynamic range 3.3 V PWM output 0.08% THD+N Powered speaker RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר