TAS5010PFBR - 2-Channel 3.3V PWM Audio Processor | Texas Instruments
부품 번호: TAS5010PFBR ✓ 활성TAS5010PFBR 개요
A digital audio PWM processor is an interface and signal-processing IC positioned between a digital audio source and a PWM power-output stage. It forms the modulation and control portion of a True Digital Audio Amplifier architecture, while a companion device such as the TAS5100 performs the high-current power amplification stage. This division keeps sensitive PCM processing separate from the switching power stage.
The TAS5010PFBR provides a device dynamic range of 96 dB. A related TAS5100-based system is measured at 93 dB dynamic range at the speaker terminals. The processor also supports an audio system configuration capable of delivering 30 W RMS, with total harmonic distortion plus noise specified as 0.08% at 1 kHz when measured at that output condition. Its two-channel architecture supports left and right digital audio reproduction from one integrated control device.
Internally, the device accepts a serial PCM digital-audio stream and performs the digital signal processing and PWM modulation required by the True Digital Audio Amplifier system. The resulting 3.3 V PWM output is not intended to drive a loudspeaker directly; it interfaces with a compatible PWM power-output device. This division of functions allows digital control, modulation, and power conversion to be optimized independently.
Typical uses include powered speakers, compact home-audio systems, digital active speakers, multimedia speaker platforms, and other two-channel audio products that benefit from a digital signal path. Designers should pair the processor with a compatible PWM power stage and implement the external components and control interface specified by the manufacturer application circuit.
PCB design should preserve short, controlled routes for the 3.3 V PWM signals because these edges represent the audio output waveform. Place associated bypassing and decoupling capacitors close to the supply pins, while keeping high-current switching paths in the companion output stage physically separate from sensitive PCM input routing.
This page combines the device architecture, verified performance markers, package details, replacement analysis, and practical integration guidance to support faster component selection and first-board bring-up. It is intended to clarify how the TAS5010PFBR fits within a True Digital Audio Amplifier design without confusing the processor output stage with a direct speaker driver.
드롭인 대체품: TAS5010PFBR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TAS5010PFBR (동일 폼 팩터 및 풋프린트) — 차이점: Package.
TAS5010IPFBR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TAS5010PFBRG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TAS5001PFBRG4
✅ 드롭인가격 문의
데이터시트 보기 →TAS5001PFBRG4
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →TAS5010PFB
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →TAS5010PFBR 최대 정격 & 전기적 특성
| Product Type | Digital Audio PWM Processor |
| Number of Audio Channels | 2 channels |
| 패키지 | 48-pin TQFP, 7 mm x 7 mm |
| 실장 유형 | Surface mount |
| Digital Audio Input | Serial PCM |
| PWM Output Level | 3.3 V |
| Device Dynamic Range | 96 dB |
| TAS5100 System Dynamic Range | 93 dB at speaker terminals |
| Total Harmonic Distortion plus Noise | 0.08% at 1 kHz to 30 W RMS |
| Maximum System Output Power | 30 W RMS |
| Power-Stage Architecture | Separate PWM power output stage required |
TAS5010PFBR 48-pin tqfp, 7 mm x 7 mm 핀 구성 가이드
TAS5010PFBR(48-pin tqfp, 7 mm x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TAS5010PFBR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TAS5010PFBR 적합 용도: 6 애플리케이션s: Two-Channel Powered Speakers, Digital Active Speaker Platforms, Multimedia Speaker Systems, Home Audio and Compact Stereo, Digital Audio Amplifier Reference Designs, Digital Signal Processing Education.
Two-Channel Powered Speakers
The TAS5010PFBR fits two-channel powered-speaker systems because it processes left and right serial PCM audio and generates a pair of 3.3 V PWM streams for a compatible power-output stage. Its 2-channel organization reduces the need for separate audio processors in a stereo enclosure. The 96 dB device dynamic range provides a high-quality digital source for the system, while the specified 0.08% THD+N at 1 kHz provides a clear distortion target when the processor is paired with the intended 30 W RMS system configuration. Designers should still evaluate the complete speaker, power-stage, filter, and enclosure response rather than relying on a processor-only figure.
추천
Digital Active Speaker Platforms
A digital active-speaker platform can place the TAS5010PFBR ahead of a TAS5100-class PWM power device to retain a digital path from the source to the speaker drive stage. The processor accepts serial PCM audio and converts it into 3.3 V PWM audio, making it appropriate for systems in which analog interstage routing would add noise or complexity. The manufacturer reports 93 dB dynamic range for a TAS5100 system measured at the speaker terminals, which is more representative of end-to-end performance than the 96 dB processor-only value. Final validation should include the selected power stage, output filters, speaker impedance, and enclosure loading.
추천
Multimedia Speaker Systems
TAS5010PFBR is suitable for multimedia speaker systems that receive digital audio from a host processor and require a reproducible two-channel amplification architecture. The serial PCM interface supports integration into a digital audio product, while the 3.3 V PWM outputs connect to a compatible power stage rather than directly to the speaker. This arrangement can simplify synchronization between channels and keep the audio-modulation function separate from high-current switching. For USB, Bluetooth, or network-audio products, the upstream codec or interface must provide the PCM format expected by the TAS5010, including the required clocking and sample-rate configuration.
추천
Home Audio and Compact Stereo
The TAS5010PFBR can support compact home-audio and stereo products that need high-quality digital modulation with two-channel processing. Its 48-pin TQFP package provides a reasonably compact surface-mount solution, while its dedicated PWM architecture avoids routing a conventional analog audio signal through the board. The 30 W RMS system condition and 0.08% THD+N at 1 kHz provide useful design targets when selecting the companion power stage and output filter. Because the processor does not directly drive speakers, designers must include the complete manufacturer-recommended output network and validate thermal and acoustic performance in the finished enclosure.
추천
Digital Audio Amplifier Reference Designs
TAS5010PFBR is appropriate for evaluating the Texas Instruments True Digital Audio Amplifier architecture in a reference-design environment. The device handles serial PCM input and 3.3 V PWM modulation, enabling the power stage, output filter, and speaker interface to be studied as separate blocks. This separation makes it easier to identify whether distortion or efficiency limitations originate in the processor, power converter, passive filter, or acoustic load. The stated 96 dB device dynamic range and 93 dB terminal-level system dynamic range provide paired checkpoints for bench validation, but production acceptance should use the complete system configuration specified by the manufacturer.
추천
Digital Signal Processing Education
The TAS5010PFBR can serve as a practical education platform for studying digital-to-PWM audio conversion because it separates PCM processing from speaker power amplification. Students can observe how a serial PCM stream becomes a 3.3 V PWM waveform and how that waveform interacts with a TAS5100 power stage and passive output filter. The two-channel architecture permits direct comparison of left and right signal paths, while the documented 0.08% THD+N condition supplies a measurable bench objective. A laboratory implementation should still observe the manufacturer's decoupling, clocking, grounding, and output-network requirements rather than improvising a generic speaker connection.
추천
추천 제품 요약
엔지니어링 참조 데이터: TAS5010PFBR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TAS5010IPFBR | TAS5010PFBRG4 | TAS5001PFBRG4 | TAS5001PFBR | TAS5010PFB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Product Type | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor | Digital Audio PWM Processor |
주요 차별점
- Two-channel digital audio processing in one package (vs TAS5001PFBRG4)
- Clear True Digital Audio Amplifier architecture (vs TDA7430)
- Identified terminal-level system performance (vs TAS5010IPFBR)
- Defined 30 W RMS system distortion condition (vs TAS5010PFB)
설계 노트
Treat the 3.3 V PWM outputs as high-edge-rate signals even though their nominal amplitude is only 3.3 V. Route them directly and symmetrically to the compatible power-output device, avoid test pads and long stubs where practical, and maintain the differential timing relationship between the two channels. Keep PCM clock and data traces away from the PWM paths and power-stage switching nodes to reduce coupling into the digital audio input.
Place all required bypass and decoupling capacitors close to their associated TAS5010PFBR supply pins, and follow the capacitor values and placement shown in the manufacturer reference circuit. The processor generates the 3.3 V PWM stream but does not supply speaker power; size and regulate the rails for the TAS5010 and its companion output device separately. Check startup, clock sequencing, and rail interaction because audio processors can be sensitive to an unstable digital supply.
Preserve the required PCM clock-to-data timing and route clock and data as a controlled source-synchronous interface. Avoid adding large test fixtures or long branch stubs to the digital input, and validate signal integrity with an oscilloscope or logic analyzer at the processor pins. The 96 dB device dynamic range describes the audio converter, but incorrect digital timing can still corrupt the stream and prevent the downstream power stage from reproducing the intended waveform.
Do not connect the 3.3 V PWM output directly to a loudspeaker. The TAS5010PFBR is the modulation and control device in a True Digital Audio Amplifier system, and a compatible PWM power-output stage plus the required output filter must provide speaker current. Also verify the exact 48-pin assignments, supply requirements, clock source, and supported audio configuration from the manufacturer datasheet before releasing a PCB for fabrication.
규정 준수 정보
The G4 family ordering option is documented, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact TAS5010PFBR ordering code.