Texas Instruments

TLV2785IN - 4-Channel 8 MHz RRIO Op Amp | Texas Instruments

N.º de pieza: TLV2785IN ✓ Activo
1.8 V Vdss PDIP (N), 16 pins Package
MOQ: 1 |

TLV2785IN Descripción general

Texas Instruments TLV2785IN is a quad operational amplifier with rail-to-rail input and output capability, an 8 MHz gain-bandwidth product, and shutdown support. It operates from 1.8 V to 3.6 V and is supplied in a 16-pin PDIP package. The four independent amplifier channels make TLV2785IN suitable for compact analog signal-conditioning systems requiring multiple low-voltage operations from one package.

A rail-to-rail operational amplifier, commonly abbreviated RRIO, accepts and produces voltages close to its positive and negative supply rails. This characteristic is useful in low-voltage systems where the useful signal range extends beyond conventional input and output limits imposed by transistor-rail architectures. TLV2785IN belongs to the operational-amplifier hierarchy within analog and mixed-signal integrated circuits.

The principal features of TLV2785IN are its four amplifier channels, 8 MHz bandwidth, rail-to-rail input and output operation, low-voltage operation from 1.8 V to 3.6 V, and shutdown capability. Shutdown support helps reduce power consumption when the associated analog subsystem is not active. A 16-pin PDIP package also provides a straightforward through-hole option for prototypes, educational systems, and equipment where a surface-mount footprint is unnecessary.

Each channel can perform common analog functions such as voltage buffering, gain amplification, active filtering, cross-over shaping, and sensor-signal conditioning. The combination of four channels in one package reduces the number of components needed for multi-channel circuits. Designers should still account for channel-to-channel behavior, input and output limits, supply decoupling, output loading, and the effect of the selected gain and signal frequency when laying out the board.

Typical uses include portable instrumentation, low-voltage sensor interfaces, active audio and control paths, signal conversion, and general-purpose embedded analog systems. TLV2785IN is especially appropriate when several buffered channels share a low supply rail and the design benefits from a single shutdown-managed quad amplifier.

For reliable operation, place the supply bypass capacitor close to the device and route each channel according to the manufacturer pin configuration. Preserve output headroom under load and avoid relying on the shutdown behavior until its logic levels and timing have been confirmed from the manufacturer datasheet.

This product summary consolidates the manufacturer classification, package information, operating characteristics, sourcing context, application guidance, and design considerations needed to evaluate TLV2785IN before implementation.

Alternativas directas para TLV2785IN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

TLV2785IN Valores máximos y características eléctricas

Number of Amplifier Channels 4 channels
Gain-Bandwidth Product 8 MHz
Minimum Operating Supply Voltage 1.8 V
Maximum Operating Supply Voltage 3.6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Support Yes
Package Type PDIP (N), 16 pins
Estilo de montaje Through-hole
Product Classification Standard general-purpose amplifier
Product Family TLV278x
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 125 °C

Guía de configuración de pines de TLV2785IN pdip (n), 16 pins

Configuración de pines para TLV2785IN (encapsulado pdip (n), 16 pins). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado pdip (n), 16 pins para TLV2785IN

No hay datos detallados de patillaje disponibles para TLV2785IN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TLV2785IN es adecuado para 6 aplicacións: Portable Sensor Signal Conditioning, Industrial Low-Voltage Acquisition, Active Audio Signal Path, Control-System Buffering, Precision Active Filtering, Battery-Powered Instrumentation.

📱

Portable Sensor Signal Conditioning

TLV2785IN fits portable sensor-conditioning systems that operate from a 1.8 V to 3.6 V supply and need more than one amplifier function. Its four channels can buffer sensor outputs, apply gain, and provide active filtering without requiring four separate packages. Rail-to-rail input and output operation is valuable when the useful signal occupies much of the low-voltage supply range. Designers should confirm the sensor’s output range and the required settling behavior at the intended gain. The 8 MHz gain-bandwidth product provides useful headroom for moderate-frequency conditioning, but higher-gain configurations require careful stability and noise review. A Request a Quote can be used to confirm availability for the exact 16-pin PDIP configuration.

🏭

Industrial Low-Voltage Acquisition

TLV2785IN can support multichannel industrial acquisition front ends built around low-voltage sensors and transducers. Four channels in one 16-pin PDIP package simplify point-to-point wiring, while rail-to-rail input capability helps preserve signal range near the supply limits. The device can buffer inputs, create gain stages, or form active filters for measurement signals. Designers must verify common-mode limits, output swing, noise, and phase margin for the selected topology. The 8 MHz bandwidth is appropriate for many low-to-moderate-frequency measurement paths, while long cable or sensor parasitic capacitance may require isolation resistors or additional filtering. Use the manufacturer pin configuration and application guidance when laying out the acquisition board.

🎧

Active Audio Signal Path

TLV2785IN is suitable for low-voltage active audio and control paths where four buffered channels are required in a compact through-hole design. Its 1.8 V minimum supply voltage supports low-power analog systems, while rail-to-rail output capability improves utilization of the available signal excursion. Each amplifier can act as a voltage follower or gain element ahead of a downstream converter or controller. Actual signal quality depends on the load impedance, gain, frequency, and required distortion performance, which must be checked against the manufacturer characteristics. Keep audio traces short, provide local supply bypassing, and avoid sharing sensitive return paths with switching currents. Shutdown support can reduce consumption when the audio subsystem is idle.

🔧

Control-System Buffering

TLV2785IN is applicable to embedded control boards that need multiple low-voltage buffers for command outputs, analog set points, or sensor interfaces. The quad organization reduces the component count compared with four single amplifiers, and the PDIP footprint simplifies through-hole prototyping. Rail-to-rail input and output behavior helps when control signals move across much of a 1.8 V to 3.6 V supply range. Because an operational amplifier is not automatically suitable for driving arbitrary loads, engineers should verify output current, capacitive-load behavior, and stability at the selected gain. Local decoupling and a quiet ground reference are especially important when the same board contains switching regulators or digital processors. Use the Request a Quote form for the exact production part number.

⚡

Precision Active Filtering

TLV2785IN can implement active low-pass, high-pass, or signal-shaping networks where multiple filters or buffered stages are needed on one board. Its 8 MHz gain-bandwidth product and rail-to-rail input and output characteristics make it relevant to low-voltage filtering tasks with moderate frequency requirements. Each channel must be assessed for closed-loop gain, phase margin, component tolerances, and output loading. At high Q or narrow-band response, practical filter performance can depend strongly on component selection and layout. Keep input and feedback components close to their associated pins, maintain short ground returns, and bypass the supply locally. The four-channel package allows several related filter sections to share the same package and supply rail.

🧩

Battery-Powered Instrumentation

TLV2785IN supports battery-powered instrumentation because it operates down to 1.8 V and combines four channels in one package. The low supply range allows the amplifier to operate directly from compact single-cell-derived rails when the signal and output excursions remain compatible. Shutdown capability is useful in instruments that alternate between measurement and standby states, although control timing must follow the manufacturer instructions. Rail-to-rail inputs and outputs increase usable signal range in compact systems. Engineers should evaluate quiescent current, shutdown behavior, noise performance, and battery-impedance interactions before finalizing the power architecture. The through-hole PDIP package is particularly convenient for prototypes and moderate-volume assembled boards.

What is TLV2785IN?
TLV2785IN is a Texas Instruments quad operational amplifier with an 8 MHz gain-bandwidth product, rail-to-rail input and output capability, shutdown support, and operation from 1.8 V to 3.6 V. According to the manufacturer product page, the device is packaged as a 16-pin PDIP. It is intended for low-voltage analog systems requiring four amplifier channels in one through-hole package.
What are the key specifications of TLV2785IN that engineers should know?
TLV2785IN combines four amplifier channels with an 8 MHz gain-bandwidth product in a 16-pin PDIP package. According to the Texas Instruments product page, it supports rail-to-rail input and output operation, shutdown, and a 1.8 V to 3.6 V supply range. These characteristics make it useful for buffering, gain stages, filtering, and multi-channel sensor-conditioning circuits operating from a low-voltage supply.
Where can I download the TLV2785IN datasheet PDF?
The official TLV2785 product page at Texas Instruments provides product information, support resources, and access to the family datasheet. Use the datasheet for the authoritative pin configuration, electrical characteristics, recommended operating conditions, shutdown logic, and application details. The manufacturer landing page is https://www.ti.com/product/TLV2785, while the exact TLV2785IN ordering information is linked from its part-details page.
Where is the TLV2785IN pinout located?
The TLV2785IN pinout is documented in the pin-configuration section of the manufacturer datasheet for the TLV278x family. The exact device is a 16-pin PDIP, so its through-hole pin numbering should be taken directly from that diagram rather than inferred from another package variant. Review power, ground, amplifier-channel, shutdown, and no-connect assignments before constructing the PCB.
Is TLV2785IN suitable for low-voltage sensor conditioning?
TLV2785IN is suitable for many low-voltage sensor-conditioning applications because it operates from 1.8 V to 3.6 V and supports rail-to-rail input and output operation. Its four channels can buffer sensor outputs or implement gain and filtering stages. The final design must still verify that the sensor output, common-mode voltage, required accuracy, and settling performance remain within the device's datasheet limits.
What can replace TLV2785IN?
No pin-to-pin replacement for TLV2785IN is established by the available manufacturer and cross-reference information. A valid replacement would need the same 16-pin PDIP footprint, matching pin functions, four amplifier channels, shutdown capability, and compatible 1.8 V to 3.6 V electrical characteristics. TLV2785IP is a different package option and therefore cannot replace TLV2785IN without a PCB change.
Is TLV2785IN the same as TLV2785IP?
No. TLV2785IN and TLV2785IP identify different package options within the TLV2785 family. TLV2785IN uses a 16-pin PDIP package, while TLV2785IP uses a different surface-mount package. Although the amplifier family may share core electrical characteristics, changing package suffix changes the footprint and prevents TLV2785IP from serving as a physical drop-in replacement for TLV2785IN.
TLV2785IN vs TLV2785IP: which package should I choose?
Choose TLV2785IN when the PCB is designed around a 16-pin PDIP footprint or when through-hole assembly and prototyping are priorities. Choose TLV2785IP when the PCB uses its compatible surface-mount footprint and production assembly favors a land pattern with shorter electrical connections. The package distinction is the primary practical difference relevant to a direct board-design decision.
When should I choose TLV2785IN over another low-voltage quad amplifier?
Choose TLV2785IN when the design requires four channels, an 8 MHz gain-bandwidth product, rail-to-rail input and output behavior, shutdown support, operation from 1.8 V to 3.6 V, and a 16-pin PDIP footprint. Select another amplifier only when its documented characteristics improve a specific requirement, such as accuracy, noise, distortion, output drive, shutdown timing, or packaging, without preventing PCB reuse.
What is the best cross-brand equivalent for TLV2785IN?
The available information does not establish a cross-brand, pin-to-pin equivalent for TLV2785IN. A candidate must match the 16-pin PDIP footprint, all amplifier and shutdown pin functions, and the principal electrical characteristics of this quad, 8 MHz, rail-to-rail, low-voltage device. Use the manufacturer cross-reference resources and compare the complete datasheets before treating any part as a replacement.
How do I buy TLV2785IN online?
Use the Request a Quote form on this page to request current TLV2785IN availability, quantity, and lead time for the exact 16-pin PDIP ordering code. This avoids relying on stale inventory information and ensures that the requested package and manufacturer part number are matched correctly. The manufacturer identifies TLV2785IN as a quad, 3.6 V, 8 MHz operational amplifier with shutdown in a 16-pin PDIP package.
What is the price of TLV2785IN?
Current TLV2785IN pricing is handled through the Request a Quote form on this page. The form supports an inquiry for the exact manufacturer part number, package, and required quantity, allowing the order to reflect current component availability rather than a historical or generic amplifier price. Specify the 16-pin PDIP option when submitting the request.
What is the lead time for TLV2785IN?
Current lead time for TLV2785IN should be confirmed through the Request a Quote form on this page by stating the required quantity and target delivery date. Lead time can change with manufacturer inventory, production conditions, and order quantity, so it should not be inferred from general marketplace listings. The quote request is the appropriate channel for a component-specific commitment.
Is TLV2785IN in stock?
Current TLV2785IN stock should be checked through the Request a Quote form on this page. Include the required quantity, shipment destination, and target date so the response can distinguish available production material from lead-time supply. The exact orderable configuration is the Texas Instruments 16-pin PDIP version identified by the suffix IN.
How should TLV2785IN be decoupled and laid out?
Place the recommended supply-bypass capacitor close to the device power pins and keep the return path short and low impedance. Route each amplifier channel according to the manufacturer pin diagram, and avoid placing high-current switching paths near sensitive input traces. The 16-pin PDIP format allows through-hole assembly, but signal routing still requires a low-loop-area ground and controlled input impedance.

Datos de referencia de ingeniería para TLV2785IN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose TLV2785IN for low-voltage analog designs that require four amplifier channels, rail-to-rail input and output operation, an 8 MHz gain-bandwidth product, shutdown support, and a 16-pin PDIP footprint. It is particularly useful for prototypes, sensor-conditioning boards, active filters, and instrumentation assembled with through-hole components. Before selecting it, verify the required offset, noise, slew rate, output-current capability, and stability under the actual load. If a surface-mount assembly is mandatory, TLV2785IP may be considered as a family option, but it requires a different footprint and is not a drop-in replacement. No cross-brand alternative is recommended without a complete pin and electrical comparison against the TLV2785IN datasheet.

Comparación con alternativas

Parámetro Este producto
Package PDIP (N), 16 pins
Brand Texas Instruments
Number of Channels 4
Gain-Bandwidth Product 8 MHz
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 3.6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Support Yes
Mounting Style Through-hole

Notas de diseño

Place the recommended bypass capacitor immediately beside the TLV2785IN supply and ground pins, and keep the current loop as short as practical. Although the PDIP package has generous lead spacing, input and feedback traces should still be compact to reduce parasitic pickup and feedback from adjacent channels. Maintain a low-impedance ground reference for analog signals and keep switching-current paths away from sensitive amplifier inputs.

Design the supply path for operation across the complete 1.8 V to 3.6 V device range and confirm that every input signal remains inside the amplifier’s permitted common-mode range. Rail-to-rail input and output characteristics reduce headroom concerns, but they do not remove the need to check input magnitude, output loading, and shutdown sequencing. Confirm the exact supply limits, quiescent current, and logic thresholds from the manufacturer datasheet before finalizing the power tree.

Do not substitute a package suffix without checking the PCB footprint. TLV2785IN is the 16-pin PDIP orderable option, while TLV2785IP uses a different package. Also avoid assuming that shutdown is available on every member of the TLV278x family. Use the TLV2785IN pin diagram and datasheet to assign shutdown, supply, amplifier, and no-connect pins correctly, especially when hand wiring a prototype board.

For higher-gain or high-Q filter sections, keep the inverting-input and feedback-node traces short, isolate sensitive nodes from adjacent channels, and use a solid ground return. Capacitive loading at the output and source capacitance at the input can affect stability; verify the actual sensor, cable, and downstream-load impedances. The 8 MHz gain-bandwidth figure should be evaluated against the operating gain and required signal bandwidth rather than treated as a universal maximum operating frequency.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The supplied manufacturer and distributor information does not explicitly state the requested compliance statuses. AEC-Q100 is not applicable because this is a general-purpose operational amplifier rather than an automotive-qualified device.

Búsquedas relacionadas

TLV2785IN datasheet TLV2785IN datasheet pdf TLV2785IN pinout TLV2785IN schematic TLV2785IN equivalent TLV2785IN replacement TLV2785IN cross reference TLV2785IN vs TLV2785IP TLV2785IN footprint TLV2785IN price TLV2785IN stock Texas Instruments TLV2785IN

Componentes & términos relacionados

Texas Instruments TLV2785IN TLV2785 TLV278x TLV2785IP quad operational amplifier operational amplifier analog integrated circuit mixed-signal integrated circuit RRIO rail-to-rail input rail-to-rail output gain-bandwidth product shutdown PDIP-16 through-hole package low-voltage operation sensor conditioning active filter signal buffering industrial instrumentation portable electronics battery-powered instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ