TLV2785IN - 4-Channel 8 MHz RRIO Op Amp | Texas Instruments
부품 번호: TLV2785IN ✓ 활성TLV2785IN 개요
A rail-to-rail operational amplifier, commonly abbreviated RRIO, accepts and produces voltages close to its positive and negative supply rails. This characteristic is useful in low-voltage systems where the useful signal range extends beyond conventional input and output limits imposed by transistor-rail architectures. TLV2785IN belongs to the operational-amplifier hierarchy within analog and mixed-signal integrated circuits.
The principal features of TLV2785IN are its four amplifier channels, 8 MHz bandwidth, rail-to-rail input and output operation, low-voltage operation from 1.8 V to 3.6 V, and shutdown capability. Shutdown support helps reduce power consumption when the associated analog subsystem is not active. A 16-pin PDIP package also provides a straightforward through-hole option for prototypes, educational systems, and equipment where a surface-mount footprint is unnecessary.
Each channel can perform common analog functions such as voltage buffering, gain amplification, active filtering, cross-over shaping, and sensor-signal conditioning. The combination of four channels in one package reduces the number of components needed for multi-channel circuits. Designers should still account for channel-to-channel behavior, input and output limits, supply decoupling, output loading, and the effect of the selected gain and signal frequency when laying out the board.
Typical uses include portable instrumentation, low-voltage sensor interfaces, active audio and control paths, signal conversion, and general-purpose embedded analog systems. TLV2785IN is especially appropriate when several buffered channels share a low supply rail and the design benefits from a single shutdown-managed quad amplifier.
For reliable operation, place the supply bypass capacitor close to the device and route each channel according to the manufacturer pin configuration. Preserve output headroom under load and avoid relying on the shutdown behavior until its logic levels and timing have been confirmed from the manufacturer datasheet.
This product summary consolidates the manufacturer classification, package information, operating characteristics, sourcing context, application guidance, and design considerations needed to evaluate TLV2785IN before implementation.
드롭인 대체품: TLV2785IN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청TLV2785IN 최대 정격 & 전기적 특성
| Number of Amplifier Channels | 4 channels |
| Gain-Bandwidth Product | 8 MHz |
| Minimum Operating Supply Voltage | 1.8 V |
| Maximum Operating Supply Voltage | 3.6 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Support | Yes |
| Package Type | PDIP (N), 16 pins |
| 장착 스타일 | Through-hole |
| Product Classification | Standard general-purpose amplifier |
| Product Family | TLV278x |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | 125 °C |
TLV2785IN pdip (n), 16 pins 핀 구성 가이드
TLV2785IN(pdip (n), 16 pins 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TLV2785IN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TLV2785IN 적합 용도: 6 애플리케이션s: Portable Sensor Signal Conditioning, Industrial Low-Voltage Acquisition, Active Audio Signal Path, Control-System Buffering, Precision Active Filtering, Battery-Powered Instrumentation.
Portable Sensor Signal Conditioning
TLV2785IN fits portable sensor-conditioning systems that operate from a 1.8 V to 3.6 V supply and need more than one amplifier function. Its four channels can buffer sensor outputs, apply gain, and provide active filtering without requiring four separate packages. Rail-to-rail input and output operation is valuable when the useful signal occupies much of the low-voltage supply range. Designers should confirm the sensor’s output range and the required settling behavior at the intended gain. The 8 MHz gain-bandwidth product provides useful headroom for moderate-frequency conditioning, but higher-gain configurations require careful stability and noise review. A Request a Quote can be used to confirm availability for the exact 16-pin PDIP configuration.
Industrial Low-Voltage Acquisition
TLV2785IN can support multichannel industrial acquisition front ends built around low-voltage sensors and transducers. Four channels in one 16-pin PDIP package simplify point-to-point wiring, while rail-to-rail input capability helps preserve signal range near the supply limits. The device can buffer inputs, create gain stages, or form active filters for measurement signals. Designers must verify common-mode limits, output swing, noise, and phase margin for the selected topology. The 8 MHz bandwidth is appropriate for many low-to-moderate-frequency measurement paths, while long cable or sensor parasitic capacitance may require isolation resistors or additional filtering. Use the manufacturer pin configuration and application guidance when laying out the acquisition board.
Active Audio Signal Path
TLV2785IN is suitable for low-voltage active audio and control paths where four buffered channels are required in a compact through-hole design. Its 1.8 V minimum supply voltage supports low-power analog systems, while rail-to-rail output capability improves utilization of the available signal excursion. Each amplifier can act as a voltage follower or gain element ahead of a downstream converter or controller. Actual signal quality depends on the load impedance, gain, frequency, and required distortion performance, which must be checked against the manufacturer characteristics. Keep audio traces short, provide local supply bypassing, and avoid sharing sensitive return paths with switching currents. Shutdown support can reduce consumption when the audio subsystem is idle.
Control-System Buffering
TLV2785IN is applicable to embedded control boards that need multiple low-voltage buffers for command outputs, analog set points, or sensor interfaces. The quad organization reduces the component count compared with four single amplifiers, and the PDIP footprint simplifies through-hole prototyping. Rail-to-rail input and output behavior helps when control signals move across much of a 1.8 V to 3.6 V supply range. Because an operational amplifier is not automatically suitable for driving arbitrary loads, engineers should verify output current, capacitive-load behavior, and stability at the selected gain. Local decoupling and a quiet ground reference are especially important when the same board contains switching regulators or digital processors. Use the Request a Quote form for the exact production part number.
Precision Active Filtering
TLV2785IN can implement active low-pass, high-pass, or signal-shaping networks where multiple filters or buffered stages are needed on one board. Its 8 MHz gain-bandwidth product and rail-to-rail input and output characteristics make it relevant to low-voltage filtering tasks with moderate frequency requirements. Each channel must be assessed for closed-loop gain, phase margin, component tolerances, and output loading. At high Q or narrow-band response, practical filter performance can depend strongly on component selection and layout. Keep input and feedback components close to their associated pins, maintain short ground returns, and bypass the supply locally. The four-channel package allows several related filter sections to share the same package and supply rail.
Battery-Powered Instrumentation
TLV2785IN supports battery-powered instrumentation because it operates down to 1.8 V and combines four channels in one package. The low supply range allows the amplifier to operate directly from compact single-cell-derived rails when the signal and output excursions remain compatible. Shutdown capability is useful in instruments that alternate between measurement and standby states, although control timing must follow the manufacturer instructions. Rail-to-rail inputs and outputs increase usable signal range in compact systems. Engineers should evaluate quiescent current, shutdown behavior, noise performance, and battery-impedance interactions before finalizing the power architecture. The through-hole PDIP package is particularly convenient for prototypes and moderate-volume assembled boards.
엔지니어링 참조 데이터: TLV2785IN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | PDIP (N), 16 pins |
| Brand | Texas Instruments |
| Number of Channels | 4 |
| Gain-Bandwidth Product | 8 MHz |
| Minimum Supply Voltage | 1.8 V |
| Maximum Supply Voltage | 3.6 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Support | Yes |
| Mounting Style | Through-hole |
설계 노트
Place the recommended bypass capacitor immediately beside the TLV2785IN supply and ground pins, and keep the current loop as short as practical. Although the PDIP package has generous lead spacing, input and feedback traces should still be compact to reduce parasitic pickup and feedback from adjacent channels. Maintain a low-impedance ground reference for analog signals and keep switching-current paths away from sensitive amplifier inputs.
Design the supply path for operation across the complete 1.8 V to 3.6 V device range and confirm that every input signal remains inside the amplifier’s permitted common-mode range. Rail-to-rail input and output characteristics reduce headroom concerns, but they do not remove the need to check input magnitude, output loading, and shutdown sequencing. Confirm the exact supply limits, quiescent current, and logic thresholds from the manufacturer datasheet before finalizing the power tree.
Do not substitute a package suffix without checking the PCB footprint. TLV2785IN is the 16-pin PDIP orderable option, while TLV2785IP uses a different package. Also avoid assuming that shutdown is available on every member of the TLV278x family. Use the TLV2785IN pin diagram and datasheet to assign shutdown, supply, amplifier, and no-connect pins correctly, especially when hand wiring a prototype board.
For higher-gain or high-Q filter sections, keep the inverting-input and feedback-node traces short, isolate sensitive nodes from adjacent channels, and use a solid ground return. Capacitive loading at the output and source capacitance at the input can affect stability; verify the actual sensor, cable, and downstream-load impedances. The 8 MHz gain-bandwidth figure should be evaluated against the operating gain and required signal bandwidth rather than treated as a universal maximum operating frequency.
규정 준수 정보
The supplied manufacturer and distributor information does not explicitly state the requested compliance statuses. AEC-Q100 is not applicable because this is a general-purpose operational amplifier rather than an automotive-qualified device.