TMS320BC51PZ57 - 57MHz 16-Bit Fixed-Point DSP | Texas Instruments
N.º de pieza: TMS320BC51PZ57 ✓ ActivoTMS320BC51PZ57 Descripción general
A fixed-point DSP is a microprocessor optimised for arithmetic on integer values, typically using a multiply-accumulate as its core operation. In the product hierarchy it sits at the level of digital signal processor, a specialised microprocessor within the broader semiconductor family, and it differs from a general-purpose microcontroller mainly in deterministic single-cycle execution of its arithmetic kernel, which makes loop-bound filtering and control loops predictable in real time.
Key characteristics of the TMS320BC51 include the 16-bit TMS320C5x CPU core with single-cycle 16-bit multiply/add, single-cycle instruction execution times of 25 ns, 35 ns and 50 ns for 5-V operation and 25 ns, 40 ns and 50 ns for 3-V operation, a 16-bit maximum addressable word, and a commercial temperature grade. The Z57 speed grade corresponds to the 57 MHz / 28.5 MIPS operating point.
Architecturally, the C5x generation separates program and data paths so that coefficient fetch and data movement do not stall the multiply-accumulate pipeline. Single-cycle multiply/add with no separate overhead instruction means a biquad section or FIR tap update completes in a fixed, known number of cycles, which simplifies scheduling real-time control and signal-processing tasks.
Typical uses include communications and speech-processing terminals, audio and control path processing, industrial instrumentation, and embedded motor-control loops where a deterministic 16-bit arithmetic engine is preferred over a general-purpose MCU.
When designing around this device, treat the supply rail carefully: the 5-V and 3-V timing figures in the datasheet differ, so clocking, memory interfaces and peripheral timing must be budgeted against the voltage actually present. Place bulk and high-frequency decoupling capacitors close to the supply pins and route the clock with short, clean traces.
This page consolidates package, clock, and MIPS data alongside pin-compatible alternatives and practical design notes that are not collected in a single place on the manufacturer datasheet.
Alternativas directas para TMS320BC51PZ57 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TMS320BC51PZ57 (mismo factor de forma y huella) — difiere en Package.
TMS320BC51PZ50
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
TMS320BC51PZ40
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
TMS320BC51PZ33
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
TMS320C51PZ57
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →TMS320C50PZ57
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
TMS320BC51PZ57 Especificaciones
| Device Type | Fixed-Point Digital Signal Processor (DSP) |
| Architecture | 16-bit TMS320C5x CPU |
| Clock Frequency | 57 MHz |
| Instruction Throughput | 28.5 MIPS |
| Word Length | 16 bit |
| Maximum Addressable Word | 16 bit |
| Encapsulado | 100-pin LQFP (14 x 14 mm) |
| Package Code | LFQFP |
| Package Shape / Lead Form | Square / Gull Wing |
| Number of Terminals | 100 |
| Tipo de montaje | Surface Mount |
| Single-Cycle Multiply/Add | 16-bit x 16-bit, single cycle |
| Instruction Execution Time (5-V Operation) | 25 ns, 35 ns and 50 ns |
| Instruction Execution Time (3-V Operation) | 25 ns, 40 ns and 50 ns |
| Temperature Grade | Commercial |
| Datasheet Document Length | 91 pages |
Guía de configuración de pines de TMS320BC51PZ57 square / gull wing
Configuración de pines para TMS320BC51PZ57 (encapsulado square / gull wing). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para TMS320BC51PZ57.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TMS320BC51PZ57 es adecuado para 6 aplicacións: Digital Audio and Voice Processing, Industrial Motor Control, Telecommunications Terminal Equipment, Industrial Instrumentation and Data Acquisition, Consumer and Building Automation Controllers, Digital Communication and Modem Baseband.
Digital Audio and Voice Processing
The TMS320BC51PZ57 suits audio and speech terminals because its 16-bit multiply/add completes in a single cycle at 57 MHz, giving 28.5 MIPS for sample-rate conversion, filtering and volume control loops. Each biquad section or FIR tap therefore consumes a predictable number of cycles, which keeps real-time deadlines simple to schedule. At 16-bit word length it aligns directly with CD-quality audio sample formats without extra conversion. The commercial temperature grade and 100-pin LQFP package suit equipment in controlled indoor enclosures.
Recomendado
Industrial Motor Control
For industrial motor and motion control, the TMS320BC51PZ57 delivers deterministic arithmetic at 28.5 MIPS, enough to run current and speed control loops for multi-axis drives with margin to spare. Single-cycle 16-bit multiply/add is the natural primitive for PI and PID update rates, while fixed-point arithmetic keeps the control path compact in ROM and RAM. The commercial grade covers standard factory and building automation environments, and the LQFP-100 footprint is directly manufacturable on standard surface-mount assembly lines.
Recomendado
Telecommunications Terminal Equipment
The TMS320BC51PZ57 fits telecom terminal and subscriber equipment where echo cancellation, framing and modulation support routines must run on a fixed schedule. At 57 MHz the processor executes 28.5 MIPS, allowing several concurrent channel-processing tasks to share one core, and the single-cycle multiply/add accelerates correlation and filtering operations that dominate modem and voice-processing workloads. The 16-bit C5x instruction set is a natural fit for legacy signalling code written for earlier TMS320 parts, easing migration from earlier platform generations.
Recomendado
Industrial Instrumentation and Data Acquisition
Instrumentation front-ends that must condition and filter sampled data benefit from the TMS320BC51PZ57's fixed-point throughput of 28.5 MIPS. Digital filter banks, calibration routines and sensor linearisation can execute inside one core with headroom for a communications task, and the single-cycle multiply/add keeps the per-sample cost predictable for time-critical logging. The 100-pin LQFP package provides the peripheral and bus pins needed to interface parallel ADC and DAC devices, while the commercial temperature grade targets indoor measurement equipment.
Recomendado
Consumer and Building Automation Controllers
The TMS320BC51PZ57 works well in HVAC controllers, smart panel modules and appliance controllers where a mix of signal conditioning and control logic must share one processor. Its 28.5 MIPS of throughput handles filtering of sensor inputs, drive of output stages and serial protocol traffic in parallel, and the deterministic single-cycle execution avoids jitter on timing-critical tasks. The commercial temperature grade matches indoor consumer and building environments, and the LQFP-100 body keeps boards compact without resorting to fine-pitch BGA assembly.
Recomendado
Digital Communication and Modem Baseband
Baseband signal paths benefit from the TMS320BC51PZ57 because correlation, symbol filtering and equalisation are all multiply/add-dominated operations, and the C5x core performs a 16-bit multiply/add in a single cycle at 57 MHz. The 28.5 MIPS budget supports several stages of a receive chain running concurrently, while fixed-point arithmetic matches the 16-bit word lengths typical of legacy modem and DTMF signalling code. The 100-pin LQFP package exposes the parallel and serial interfaces required to pair with network and line interface devices.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TMS320BC51PZ57 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TMS320BC51PZ50 | TMS320BC51PZ40 | TMS320BC51PZ33 | TMS320C51PZ57 | TMS320C50PZ57 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint |
| Word Length | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| CPU Core | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | Earlier C5x-generation DSP core | First-generation C5x DSP core |
Diferenciadores clave
- Highest clock point in the TMS320BC51 speed-grade range (frente a TMS320BC51PZ50)
- Full BC51 peripheral and memory-map compatibility with the slower speed grades (frente a TMS320C51PZ57)
- Single-cycle 16-bit multiply/add with deterministic timing (frente a TMS320C50PZ57)
- No board change required when moving between speed grades (frente a TMS320BC51PZ40)
Notas de diseño
The manufacturer timing tables list separate single-cycle instruction times for 5-V and 3-V operation (25/35/50 ns and 25/40/50 ns respectively), so treat the supply rail as a scheduling variable, not just a power choice. Estimated: at 57 MHz the cycle period is 17.5 ns, so a 3.3-V rail leaves only a few ns of margin over the 25 ns figure if memory or peripheral stalls occur. Confirm the rail on the board and size the external bus timing accordingly before committing the clock rate.
The 100-lead LQFP on a 14 x 14 mm body has a fine 0.5 mm lead pitch, so plan solder mask and paste apertures from the manufacturer land pattern rather than from a generic LQFP footprint. Provide a solid ground plane under the device, keep the supply and ground pins on the same side of the routing as the decoupling, and reserve via-in-pad access at the corner supply pins to keep loop inductance low for the switching edges on this 57 MHz core.
At 57 MHz with single-cycle execution, clock and bus edges are fast enough for routing discipline to matter. Keep the clock trace short, match length to any synchronous memory interface, and avoid routing the clock adjacent to switching or high-current outputs such as relay drivers or motor gate drives. Because the core is a fixed-point machine, poor signal integrity shows up as sporadic arithmetic errors rather than clean timing failures, which makes it hard to debug without careful board layout.
A frequent mistake when swapping speed grades is assuming the slower part is a free downgrade: dropping from 57 MHz to 50 MHz removes about 14 percent of the 28.5 MIPS budget, and the 40 MHz and 33 MHz grades remove considerably more. Re-run the worst-case loop timing analysis for the new grade and confirm the filter and control-loop deadlines still close before signing off the substitution.
Información de cumplimiento
The part is listed in the commercial temperature grade in a 100-pin LQFP (LFQFP) package. RoHS, REACH, lead-free and halogen-free statements are not stated for this MPN in the technical data available, so they are recorded as unknown rather than assumed. The device is not an automotive-qualified product, so AEC-Q100 does not apply.