Texas Instruments

TMS320BC51PZ57 - 57MHz 16-Bit Fixed-Point DSP | Texas Instruments

MPN: TMS320BC51PZ57 ✓ 啟用中
100-pin LQFP (14 x 14 mm) Package 57 MHz Speed
MOQ: 1 |

TMS320BC51PZ57 概覽

The Texas Instruments TMS320BC51PZ57 is a 16-bit fixed-point digital signal processor (DSP) clocked at 57 MHz with 28.5 MIPS of instruction throughput, supplied in a 100-pin LQFP (14 x 14 mm) gull-wing package.

A fixed-point DSP is a microprocessor optimised for arithmetic on integer values, typically using a multiply-accumulate as its core operation. In the product hierarchy it sits at the level of digital signal processor, a specialised microprocessor within the broader semiconductor family, and it differs from a general-purpose microcontroller mainly in deterministic single-cycle execution of its arithmetic kernel, which makes loop-bound filtering and control loops predictable in real time.

Key characteristics of the TMS320BC51 include the 16-bit TMS320C5x CPU core with single-cycle 16-bit multiply/add, single-cycle instruction execution times of 25 ns, 35 ns and 50 ns for 5-V operation and 25 ns, 40 ns and 50 ns for 3-V operation, a 16-bit maximum addressable word, and a commercial temperature grade. The Z57 speed grade corresponds to the 57 MHz / 28.5 MIPS operating point.

Architecturally, the C5x generation separates program and data paths so that coefficient fetch and data movement do not stall the multiply-accumulate pipeline. Single-cycle multiply/add with no separate overhead instruction means a biquad section or FIR tap update completes in a fixed, known number of cycles, which simplifies scheduling real-time control and signal-processing tasks.

Typical uses include communications and speech-processing terminals, audio and control path processing, industrial instrumentation, and embedded motor-control loops where a deterministic 16-bit arithmetic engine is preferred over a general-purpose MCU.

When designing around this device, treat the supply rail carefully: the 5-V and 3-V timing figures in the datasheet differ, so clocking, memory interfaces and peripheral timing must be budgeted against the voltage actually present. Place bulk and high-frequency decoupling capacitors close to the supply pins and route the clock with short, clean traces.

This page consolidates package, clock, and MIPS data alongside pin-compatible alternatives and practical design notes that are not collected in a single place on the manufacturer datasheet.

直接替換替代品,適用於 TMS320BC51PZ57 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TMS320BC51PZ57 (相同外形與佔位) — 差異在於 Package.

Texas Instruments
Package: 100-pin PQFP
比較對象 TMS320BC51PZ57 →

TMS320BC51PZ50

✅ 直接替換 ⚠️ 規格未經驗證
📦 LQFP-100 (14 x 14 mm)
Clock 50 MHz vs 57 MHz (-12%), throughput roughly 25 MIPS vs 28.5 MIPS; identical 100-pin LQFP footprint and C5x pinout

📋 參考替代品(不在目錄中)

TMS320BC51PZ40

✅ 直接替換 ⚠️ 規格未經驗證
📦 LQFP-100 (14 x 14 mm)
Clock 40 MHz vs 57 MHz (-30%), throughput about 20 MIPS vs 28.5 MIPS; identical 100-pin LQFP footprint and pinout

📋 參考替代品(不在目錄中)

TMS320BC51PZ33

✅ 直接替換 ⚠️ 規格未經驗證
📦 LQFP-100 (14 x 14 mm)
Clock 33 MHz vs 57 MHz (-42% throughput class), outside the 30 percent drop-in floor for the key clock rating

📋 參考替代品(不在目錄中)

TMS320C51PZ57

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 LQFP-100 (14 x 14 mm)
16-bit digital signal processor (DSP) · TMS320C5x, 16-bit fixed-point · 57.14 MHz · 57 MHz · 25 ns, 35 ns, or 50 ns single-cycle · 25 ns, 40 ns, or 50 ns single-cycle · Single-cycle 16-bit multiply/add · 16 bits

聯絡詢價

查看資料表 →

TMS320C50PZ57

✅ 直接替換 ⚠️ 規格未經驗證
📦 LQFP-100 (14 x 14 mm)
First-generation C5x DSP in the same LQFP-100 package; fewer peripherals and no on-chip memory features of the BC51 grade, clock class lower

📋 參考替代品(不在目錄中)

TMS320BC51PZ57 規格

Device Type Fixed-Point Digital Signal Processor (DSP)
Architecture 16-bit TMS320C5x CPU
Clock Frequency 57 MHz
Instruction Throughput 28.5 MIPS
Word Length 16 bit
Maximum Addressable Word 16 bit
封裝 100-pin LQFP (14 x 14 mm)
Package Code LFQFP
Package Shape / Lead Form Square / Gull Wing
Number of Terminals 100
安裝類型 Surface Mount
Single-Cycle Multiply/Add 16-bit x 16-bit, single cycle
Instruction Execution Time (5-V Operation) 25 ns, 35 ns and 50 ns
Instruction Execution Time (3-V Operation) 25 ns, 40 ns and 50 ns
Temperature Grade Commercial
Datasheet Document Length 91 pages

TMS320BC51PZ57 square / gull wing 腳位配置指南

TMS320BC51PZ57(square / gull wing 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TMS320BC51PZ57 的 square / gull wing 封裝腳位圖

無詳細腳位定義資料: TMS320BC51PZ57.

請參閱 資料表 以查看完整腳位配置。

典型應用

TMS320BC51PZ57 適用於 6 應用s: Digital Audio and Voice Processing, Industrial Motor Control, Telecommunications Terminal Equipment, Industrial Instrumentation and Data Acquisition, Consumer and Building Automation Controllers, Digital Communication and Modem Baseband.

🎧

Digital Audio and Voice Processing

The TMS320BC51PZ57 suits audio and speech terminals because its 16-bit multiply/add completes in a single cycle at 57 MHz, giving 28.5 MIPS for sample-rate conversion, filtering and volume control loops. Each biquad section or FIR tap therefore consumes a predictable number of cycles, which keeps real-time deadlines simple to schedule. At 16-bit word length it aligns directly with CD-quality audio sample formats without extra conversion. The commercial temperature grade and 100-pin LQFP package suit equipment in controlled indoor enclosures.

🏭

Industrial Motor Control

For industrial motor and motion control, the TMS320BC51PZ57 delivers deterministic arithmetic at 28.5 MIPS, enough to run current and speed control loops for multi-axis drives with margin to spare. Single-cycle 16-bit multiply/add is the natural primitive for PI and PID update rates, while fixed-point arithmetic keeps the control path compact in ROM and RAM. The commercial grade covers standard factory and building automation environments, and the LQFP-100 footprint is directly manufacturable on standard surface-mount assembly lines.

🌐

Telecommunications Terminal Equipment

The TMS320BC51PZ57 fits telecom terminal and subscriber equipment where echo cancellation, framing and modulation support routines must run on a fixed schedule. At 57 MHz the processor executes 28.5 MIPS, allowing several concurrent channel-processing tasks to share one core, and the single-cycle multiply/add accelerates correlation and filtering operations that dominate modem and voice-processing workloads. The 16-bit C5x instruction set is a natural fit for legacy signalling code written for earlier TMS320 parts, easing migration from earlier platform generations.

📟

Industrial Instrumentation and Data Acquisition

Instrumentation front-ends that must condition and filter sampled data benefit from the TMS320BC51PZ57's fixed-point throughput of 28.5 MIPS. Digital filter banks, calibration routines and sensor linearisation can execute inside one core with headroom for a communications task, and the single-cycle multiply/add keeps the per-sample cost predictable for time-critical logging. The 100-pin LQFP package provides the peripheral and bus pins needed to interface parallel ADC and DAC devices, while the commercial temperature grade targets indoor measurement equipment.

🏠

Consumer and Building Automation Controllers

The TMS320BC51PZ57 works well in HVAC controllers, smart panel modules and appliance controllers where a mix of signal conditioning and control logic must share one processor. Its 28.5 MIPS of throughput handles filtering of sensor inputs, drive of output stages and serial protocol traffic in parallel, and the deterministic single-cycle execution avoids jitter on timing-critical tasks. The commercial temperature grade matches indoor consumer and building environments, and the LQFP-100 body keeps boards compact without resorting to fine-pitch BGA assembly.

📡

Digital Communication and Modem Baseband

Baseband signal paths benefit from the TMS320BC51PZ57 because correlation, symbol filtering and equalisation are all multiply/add-dominated operations, and the C5x core performs a 16-bit multiply/add in a single cycle at 57 MHz. The 28.5 MIPS budget supports several stages of a receive chain running concurrently, while fixed-point arithmetic matches the 16-bit word lengths typical of legacy modem and DTMF signalling code. The 100-pin LQFP package exposes the parallel and serial interfaces required to pair with network and line interface devices.

What is the TMS320BC51PZ57?
The TMS320BC51PZ57 is a 16-bit fixed-point digital signal processor from Texas Instruments built on the TMS320C5x CPU core. It executes at 57 MHz with 28.5 MIPS of throughput and ships in a 100-pin LQFP package measuring 14 x 14 mm. According to the Texas Instruments TMS320BC51 datasheet, the core performs a 16-bit multiply/add in a single cycle, which makes it a deterministic arithmetic engine rather than a general-purpose controller.
What is the clock speed of the TMS320BC51PZ57?
The TMS320BC51PZ57 runs at 57 MHz, corresponding to a 28.5 MIPS instruction rate at the Z57 speed grade. The TMS320BC51 datasheet describes single-cycle instruction execution times of 25 ns, 35 ns and 50 ns for 5-V operation and 25 ns, 40 ns and 50 ns for 3-V operation, so the achievable cycle count depends on the supply voltage present on the board.
What package does the TMS320BC51PZ57 come in?
The TMS320BC51PZ57 is packaged in a 100-pin LQFP (also written LFQFP) with a 14 x 14 mm body, square shape and gull-wing leads, intended for surface-mount assembly. The manufacturer datasheet shows the full 100-terminal pin description table, which is the reference to use when assigning PCB tracks and decoupling connections for this 14 x 14 mm footprint.
Where can I download the TMS320BC51PZ57 datasheet PDF?
The TMS320BC51PZ57 datasheet PDF is available from the Texas Instruments product page for the TMS320BC51 family, linked from the datasheet field on this page. The document runs 91 pages and covers the C5x CPU architecture, memory map, peripheral set, instruction timing tables and timing diagrams. Download the PDF and use its pin-description table and electrical characteristics sections when planning the board layout.
Where can I buy the TMS320BC51PZ57 online?
Use the Request a Quote form on this page to obtain current pricing, stock position and lead time for the TMS320BC51PZ57. Because this part is a legacy Texas Instruments DSP with a 100-lead LQFP footprint, supply and pricing move with market conditions, so a live quote is the only accurate way to confirm availability. The quote request can also cover reel quantities, moisture level and delivery schedule.
What is the lead time for the TMS320BC51PZ57?
Lead time for the TMS320BC51PZ57 depends on factory load and the reel quantity you commit to, so request it through the Request a Quote form on this page rather than relying on a cached figure. When you submit the request, state the required quantity per reel, the target delivery date and the shipping destination so that the confirmed schedule reflects your actual production plan.
Is the TMS320BC51PZ57 in stock?
Stock for the TMS320BC51PZ57 fluctuates by reel and by region, so confirm current availability through the Request a Quote form on this page. The part is listed by Texas Instruments as an active member of the TMS320BC51 family with a defined 100-pin LQFP package, which supports long-term sourcing for designs already built around this footprint. Volume commitments generally receive the most predictable schedule.
TMS320BC51PZ57 vs TMS320C51 - which is better for a new design?
The TMS320BC51PZ57 is the better choice for new designs that need the higher 57 MHz clock point and 28.5 MIPS throughput with the C5x-era peripheral set. The TMS320C51 is an earlier 16-bit DSP in the same LQFP-100 family with a lower clock ceiling. Because the two devices differ in memory map and peripheral availability, confirm the register and memory compatibility for your code before treating one as a substitute for the other.
What is the difference between the TMS320BC51PZ57 and the TMS320BC51PZ50?
The primary difference is the operating speed grade: the TMS320BC51PZ57 runs at 57 MHz with 28.5 MIPS, while the TMS320BC51PZ50 is the 50 MHz grade of the same TMS320BC51 family in the identical 100-pin LQFP package. Both use the 16-bit TMS320C5x CPU with single-cycle 16-bit multiply/add, so the faster grade raises throughput by roughly 14 percent while the pinout and peripheral set stay the same.
When should I choose the TMS320BC51PZ57 over the TMS320BC51PZ50?
Choose the TMS320BC51PZ57 when your sampling rate, filter length or control-loop iteration budget cannot be met at 50 MHz. At 57 MHz the device provides 28.5 MIPS against roughly 25 MIPS for the PZ50 grade, an increase of about 14 percent that directly shortens the number of iterations needed per sample. If the existing design already fits inside the 50 MHz budget, the PZ50 grade saves power without requiring a layout change.
What is the best drop-in replacement for the TMS320BC51PZ57?
The most practical drop-in replacements are other TMS320BC51 speed grades in the same 100-pin LQFP footprint, notably the TMS320BC51PZ50 and the slower 40 MHz grade, both of which keep the same 16-bit C5x core and pinout. Each lower grade reduces clock throughput by 12 to 30 percent, so choose one only after re-checking that the real-time loop budget still closes at the reduced clock rate.
What can replace the TMS320BC51PZ57 in a legacy design?
For a legacy replacement, the TMS320C51 in the same LQFP-100 family is the closest architectural option because it shares the 16-bit C5x-style DSP heritage and the identical package outline. Expect a lower clock ceiling and a different memory map and peripheral set, which means code and register-level changes rather than a pure no-touch swap. The TMS320BC51PZ50 remains the lowest-risk choice when only speed is the issue.
Is the TMS320BC51PZ57 suitable for motor control and industrial signal processing?
Yes, the TMS320BC51PZ57 is well suited to industrial motor-control and signal-processing loops because its 16-bit multiply/add executes in a single cycle at 57 MHz, giving deterministic and repeatable loop timing. Combined with 28.5 MIPS of throughput, that supports multi-axis control loops and adaptive filtering. Provide solid decoupling, a clean clock source and attention to the 3-V versus 5-V timing difference described in the manufacturer datasheet.
What are the key specifications of the TMS320BC51PZ57 that engineers should know?
The headline specifications are a 57 MHz clock, 28.5 MIPS throughput, a 16-bit TMS320C5x CPU core, single-cycle 16-bit multiply/add, 16-bit maximum addressable word, and a 100-pin LQFP (14 x 14 mm) surface-mount package in the commercial temperature grade. The Texas Instruments TMS320BC51 datasheet also lists single-cycle instruction times of 25 ns, 35 ns and 50 ns at 5 V and 25 ns, 40 ns and 50 ns at 3 V, which govern achievable loop rate.
Is there a non-Texas Instruments equivalent for the TMS320BC51PZ57?
No directly pin-compatible equivalent from another manufacturer was identified for the TMS320BC51PZ57 in the 100-pin LQFP footprint with the 16-bit C5x instruction set. The architecture, memory map and peripheral set are specific to the TMS320C5x family, so a competitor device would normally require a redesigned board and rewritten firmware. For a same-footprint path, stay within the TMS320BC51 and TMS320C51 families and confirm register compatibility with the manufacturer datasheet.

工程參考資料,適用於 TMS320BC51PZ57 — 比較、設計指引及合規資訊。

選型指南

Choose the TMS320BC51PZ57 when your real-time budget needs the 28.5 MIPS available at 57 MHz in a 100-lead LQFP package and the design already targets the TMS320BC51 peripheral set. Select the TMS320BC51PZ50 when the loop budget closes with roughly 14 percent less throughput and you want lower power consumption on the same board; the pinout is unchanged. Drop to the TMS320BC51PZ40 or PZ33 only after re-running worst-case timing, since each step removes a large share of the arithmetic budget. If you are porting from an earlier platform, the TMS320C51PZ57 and TMS320C50PZ57 fit the same package outline but differ in memory map and peripherals, so budget for firmware and register-level rework. No third-party manufacturer offers a verified pin-compatible equivalent in this footprint, so a redesign of the board is the only realistic path to a non-Texas Instruments solution.

與替代品比較

參數 本產品 TMS320BC51PZ50 TMS320BC51PZ40 TMS320BC51PZ33 TMS320C51PZ57 TMS320C50PZ57
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) - same footprint 100-pin LQFP (14 x 14 mm) - same footprint 100-pin LQFP (14 x 14 mm) - same footprint 100-pin LQFP (14 x 14 mm) - same footprint 100-pin LQFP (14 x 14 mm) - same footprint
Word Length 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
CPU Core TMS320C5x, 16-bit fixed-point TMS320C5x, 16-bit fixed-point TMS320C5x, 16-bit fixed-point TMS320C5x, 16-bit fixed-point Earlier C5x-generation DSP core First-generation C5x DSP core

主要差異化特點

  • Highest clock point in the TMS320BC51 speed-grade range (對比TMS320BC51PZ50)
  • Full BC51 peripheral and memory-map compatibility with the slower speed grades (對比TMS320C51PZ57)
  • Single-cycle 16-bit multiply/add with deterministic timing (對比TMS320C50PZ57)
  • No board change required when moving between speed grades (對比TMS320BC51PZ40)

設計說明

The manufacturer timing tables list separate single-cycle instruction times for 5-V and 3-V operation (25/35/50 ns and 25/40/50 ns respectively), so treat the supply rail as a scheduling variable, not just a power choice. Estimated: at 57 MHz the cycle period is 17.5 ns, so a 3.3-V rail leaves only a few ns of margin over the 25 ns figure if memory or peripheral stalls occur. Confirm the rail on the board and size the external bus timing accordingly before committing the clock rate.

The 100-lead LQFP on a 14 x 14 mm body has a fine 0.5 mm lead pitch, so plan solder mask and paste apertures from the manufacturer land pattern rather than from a generic LQFP footprint. Provide a solid ground plane under the device, keep the supply and ground pins on the same side of the routing as the decoupling, and reserve via-in-pad access at the corner supply pins to keep loop inductance low for the switching edges on this 57 MHz core.

At 57 MHz with single-cycle execution, clock and bus edges are fast enough for routing discipline to matter. Keep the clock trace short, match length to any synchronous memory interface, and avoid routing the clock adjacent to switching or high-current outputs such as relay drivers or motor gate drives. Because the core is a fixed-point machine, poor signal integrity shows up as sporadic arithmetic errors rather than clean timing failures, which makes it hard to debug without careful board layout.

A frequent mistake when swapping speed grades is assuming the slower part is a free downgrade: dropping from 57 MHz to 50 MHz removes about 14 percent of the 28.5 MIPS budget, and the 40 MHz and 33 MHz grades remove considerably more. Re-run the worst-case loop timing analysis for the new grade and confirm the filter and control-loop deadlines still close before signing off the substitution.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The part is listed in the commercial temperature grade in a 100-pin LQFP (LFQFP) package. RoHS, REACH, lead-free and halogen-free statements are not stated for this MPN in the technical data available, so they are recorded as unknown rather than assumed. The device is not an automotive-qualified product, so AEC-Q100 does not apply.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TMS320BC51PZ57 datasheet TMS320BC51PZ57 datasheet pdf TMS320BC51PZ57 pinout TMS320BC51PZ57 100-LQFP footprint Texas Instruments TMS320BC51PZ57 TMS320BC51 57MHz fixed point DSP TMS320BC51PZ57 replacement TMS320BC51PZ57 equivalent part TMS320BC51PZ57 vs TMS320BC51PZ50 TMS320BC51PZ57 price and stock TMS320BC51PZ57 motor control application TMS320BC51PZ57 lead time

相關元件與詞彙

Texas Instruments TMS320BC51PZ57 TMS320BC51 TMS320C5x TMS320C51 TMS320C50 fixed-point digital signal processor DSP microprocessor semiconductor multiply-accumulate 28.5 MIPS 57 MHz 16-bit CPU LQFP-100 LFQFP gull-wing lead surface mount 14 x 14 mm package commercial temperature grade single-cycle instruction execution digital signal processing motor control industrial instrumentation telecommunications terminal equipment
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情