TMS320BC51PZ57 - 57MHz 16-Bit Fixed-Point DSP | Texas Instruments
料号: TMS320BC51PZ57 ✓ 量产中TMS320BC51PZ57 概述
A fixed-point DSP is a microprocessor optimised for arithmetic on integer values, typically using a multiply-accumulate as its core operation. In the product hierarchy it sits at the level of digital signal processor, a specialised microprocessor within the broader semiconductor family, and it differs from a general-purpose microcontroller mainly in deterministic single-cycle execution of its arithmetic kernel, which makes loop-bound filtering and control loops predictable in real time.
Key characteristics of the TMS320BC51 include the 16-bit TMS320C5x CPU core with single-cycle 16-bit multiply/add, single-cycle instruction execution times of 25 ns, 35 ns and 50 ns for 5-V operation and 25 ns, 40 ns and 50 ns for 3-V operation, a 16-bit maximum addressable word, and a commercial temperature grade. The Z57 speed grade corresponds to the 57 MHz / 28.5 MIPS operating point.
Architecturally, the C5x generation separates program and data paths so that coefficient fetch and data movement do not stall the multiply-accumulate pipeline. Single-cycle multiply/add with no separate overhead instruction means a biquad section or FIR tap update completes in a fixed, known number of cycles, which simplifies scheduling real-time control and signal-processing tasks.
Typical uses include communications and speech-processing terminals, audio and control path processing, industrial instrumentation, and embedded motor-control loops where a deterministic 16-bit arithmetic engine is preferred over a general-purpose MCU.
When designing around this device, treat the supply rail carefully: the 5-V and 3-V timing figures in the datasheet differ, so clocking, memory interfaces and peripheral timing must be budgeted against the voltage actually present. Place bulk and high-frequency decoupling capacitors close to the supply pins and route the clock with short, clean traces.
This page consolidates package, clock, and MIPS data alongside pin-compatible alternatives and practical design notes that are not collected in a single place on the manufacturer datasheet.
直接替换替代料: TMS320BC51PZ57 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TMS320BC51PZ57 (相同外形与封装尺寸) ——差异在于 Package.
TMS320BC51PZ50
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320BC51PZ40
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320BC51PZ33
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320C51PZ57
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →TMS320C50PZ57
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
TMS320BC51PZ57 规格参数
| Device Type | Fixed-Point Digital Signal Processor (DSP) |
| Architecture | 16-bit TMS320C5x CPU |
| Clock Frequency | 57 MHz |
| Instruction Throughput | 28.5 MIPS |
| Word Length | 16 bit |
| Maximum Addressable Word | 16 bit |
| 封装 | 100-pin LQFP (14 x 14 mm) |
| Package Code | LFQFP |
| Package Shape / Lead Form | Square / Gull Wing |
| Number of Terminals | 100 |
| 安装类型 | Surface Mount |
| Single-Cycle Multiply/Add | 16-bit x 16-bit, single cycle |
| Instruction Execution Time (5-V Operation) | 25 ns, 35 ns and 50 ns |
| Instruction Execution Time (3-V Operation) | 25 ns, 40 ns and 50 ns |
| Temperature Grade | Commercial |
| Datasheet Document Length | 91 pages |
TMS320BC51PZ57 square / gull wing 引脚配置指南
TMS320BC51PZ57(square / gull wing 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TMS320BC51PZ57.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TMS320BC51PZ57 适用于 6 应用s: Digital Audio and Voice Processing, Industrial Motor Control, Telecommunications Terminal Equipment, Industrial Instrumentation and Data Acquisition, Consumer and Building Automation Controllers, Digital Communication and Modem Baseband.
Digital Audio and Voice Processing
The TMS320BC51PZ57 suits audio and speech terminals because its 16-bit multiply/add completes in a single cycle at 57 MHz, giving 28.5 MIPS for sample-rate conversion, filtering and volume control loops. Each biquad section or FIR tap therefore consumes a predictable number of cycles, which keeps real-time deadlines simple to schedule. At 16-bit word length it aligns directly with CD-quality audio sample formats without extra conversion. The commercial temperature grade and 100-pin LQFP package suit equipment in controlled indoor enclosures.
推荐
Industrial Motor Control
For industrial motor and motion control, the TMS320BC51PZ57 delivers deterministic arithmetic at 28.5 MIPS, enough to run current and speed control loops for multi-axis drives with margin to spare. Single-cycle 16-bit multiply/add is the natural primitive for PI and PID update rates, while fixed-point arithmetic keeps the control path compact in ROM and RAM. The commercial grade covers standard factory and building automation environments, and the LQFP-100 footprint is directly manufacturable on standard surface-mount assembly lines.
推荐
Telecommunications Terminal Equipment
The TMS320BC51PZ57 fits telecom terminal and subscriber equipment where echo cancellation, framing and modulation support routines must run on a fixed schedule. At 57 MHz the processor executes 28.5 MIPS, allowing several concurrent channel-processing tasks to share one core, and the single-cycle multiply/add accelerates correlation and filtering operations that dominate modem and voice-processing workloads. The 16-bit C5x instruction set is a natural fit for legacy signalling code written for earlier TMS320 parts, easing migration from earlier platform generations.
推荐
Industrial Instrumentation and Data Acquisition
Instrumentation front-ends that must condition and filter sampled data benefit from the TMS320BC51PZ57's fixed-point throughput of 28.5 MIPS. Digital filter banks, calibration routines and sensor linearisation can execute inside one core with headroom for a communications task, and the single-cycle multiply/add keeps the per-sample cost predictable for time-critical logging. The 100-pin LQFP package provides the peripheral and bus pins needed to interface parallel ADC and DAC devices, while the commercial temperature grade targets indoor measurement equipment.
推荐
Consumer and Building Automation Controllers
The TMS320BC51PZ57 works well in HVAC controllers, smart panel modules and appliance controllers where a mix of signal conditioning and control logic must share one processor. Its 28.5 MIPS of throughput handles filtering of sensor inputs, drive of output stages and serial protocol traffic in parallel, and the deterministic single-cycle execution avoids jitter on timing-critical tasks. The commercial temperature grade matches indoor consumer and building environments, and the LQFP-100 body keeps boards compact without resorting to fine-pitch BGA assembly.
推荐
Digital Communication and Modem Baseband
Baseband signal paths benefit from the TMS320BC51PZ57 because correlation, symbol filtering and equalisation are all multiply/add-dominated operations, and the C5x core performs a 16-bit multiply/add in a single cycle at 57 MHz. The 28.5 MIPS budget supports several stages of a receive chain running concurrently, while fixed-point arithmetic matches the 16-bit word lengths typical of legacy modem and DTMF signalling code. The 100-pin LQFP package exposes the parallel and serial interfaces required to pair with network and line interface devices.
推荐
推荐产品汇总
工程参考数据: TMS320BC51PZ57 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TMS320BC51PZ50 | TMS320BC51PZ40 | TMS320BC51PZ33 | TMS320C51PZ57 | TMS320C50PZ57 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint | 100-pin LQFP (14 x 14 mm) - same footprint |
| Word Length | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| CPU Core | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | TMS320C5x, 16-bit fixed-point | Earlier C5x-generation DSP core | First-generation C5x DSP core |
关键差异点
- Highest clock point in the TMS320BC51 speed-grade range (对比 TMS320BC51PZ50)
- Full BC51 peripheral and memory-map compatibility with the slower speed grades (对比 TMS320C51PZ57)
- Single-cycle 16-bit multiply/add with deterministic timing (对比 TMS320C50PZ57)
- No board change required when moving between speed grades (对比 TMS320BC51PZ40)
设计说明
The manufacturer timing tables list separate single-cycle instruction times for 5-V and 3-V operation (25/35/50 ns and 25/40/50 ns respectively), so treat the supply rail as a scheduling variable, not just a power choice. Estimated: at 57 MHz the cycle period is 17.5 ns, so a 3.3-V rail leaves only a few ns of margin over the 25 ns figure if memory or peripheral stalls occur. Confirm the rail on the board and size the external bus timing accordingly before committing the clock rate.
The 100-lead LQFP on a 14 x 14 mm body has a fine 0.5 mm lead pitch, so plan solder mask and paste apertures from the manufacturer land pattern rather than from a generic LQFP footprint. Provide a solid ground plane under the device, keep the supply and ground pins on the same side of the routing as the decoupling, and reserve via-in-pad access at the corner supply pins to keep loop inductance low for the switching edges on this 57 MHz core.
At 57 MHz with single-cycle execution, clock and bus edges are fast enough for routing discipline to matter. Keep the clock trace short, match length to any synchronous memory interface, and avoid routing the clock adjacent to switching or high-current outputs such as relay drivers or motor gate drives. Because the core is a fixed-point machine, poor signal integrity shows up as sporadic arithmetic errors rather than clean timing failures, which makes it hard to debug without careful board layout.
A frequent mistake when swapping speed grades is assuming the slower part is a free downgrade: dropping from 57 MHz to 50 MHz removes about 14 percent of the 28.5 MIPS budget, and the 40 MHz and 33 MHz grades remove considerably more. Re-run the worst-case loop timing analysis for the new grade and confirm the filter and control-loop deadlines still close before signing off the substitution.
合规信息
The part is listed in the commercial temperature grade in a 100-pin LQFP (LFQFP) package. RoHS, REACH, lead-free and halogen-free statements are not stated for this MPN in the technical data available, so they are recorded as unknown rather than assumed. The device is not an automotive-qualified product, so AEC-Q100 does not apply.