STMicroelectronics

TS941IDT - Micropower Rail-to-Rail Op Amp | STMicroelectronics

N.º de pieza: TS941IDT ✓ Activo
8-SOIC Package
MOQ: 1 |

TS941IDT Descripción general

The STMicroelectronics TS941IDT is a single-circuit, general-purpose operational amplifier characterized by micropower operation and rail-to-rail output voltage swing. It is packaged in an 8-pin SOIC and is identified as a 10 kHz device. The TS941IDT is intended for low-power signal-conditioning systems where a small amplifier package, low-power operation, and rail-to-rail output capability are useful.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The amplifier belongs to the voltage-feedback operational-amplifier family within the broader linear-amplifier and signal-processing IC hierarchy. Rail-to-rail output operation allows the output to approach the supply rails more closely than a conventional fixed-headroom amplifier, which can simplify signal-range calculations in low-voltage systems.

Key characteristics of the TS941IDT include one amplifier circuit per package, micropower operation, rail-to-rail output behavior, and a gain-bandwidth product listed at 10 kHz. These attributes make the device applicable to sensor interfaces, low-level signal conditioning, portable instrumentation, and battery-powered products. Its 8-SOIC outline supports conventional surface-mount assembly while providing separate input, output, supply, and feedback connections.

The TS94x-device family is intended for general-purpose precision signal amplification rather than high-speed waveform processing. The 10 kHz gain-bandwidth characteristic favors static or slowly varying signals, including sensor outputs, reference voltages, and slow feedback-control loops. Rail-to-rail output capability improves usable output range, while the single-amplifier package reduces board area when each signal channel requires only one active device.

Typical uses include low-power sensor conditioning, portable measurement systems, analog control loops, and interface stages that operate from limited supply voltages. The device can also support low-current sensing and monitoring circuits where continued operation with low power consumption is valuable. Designers should confirm input common-mode range, output swing, supply limits, noise, offset, and stability requirements against the manufacturer datasheet before selecting it for a new signal chain.

PCB implementation requires care around the feedback network and supply connections. Place input and output decoupling capacitors close to the device, keep feedback-loop routing compact, and provide a low-impedance ground return. Because the TS941IDT is optimized for micropower applications, component tolerances and leakage currents can influence bias-point accuracy, especially when sensing signals close to the supply rails.

This page organizes the available TS941IDT technical information with an application-focused selection guide, drop-in replacement analysis, comparison data, and practical layout guidance. It is intended to help engineers determine whether the TS941IDT's package, bandwidth, rail-to-rail output behavior, and low-power orientation fit the target circuit before committing to a design.

Alternativas directas para TS941IDT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con TS941IDT (mismo factor de forma y huella) — difiere en Amplifier Type, Package.

STMicroelectronics
Amplifier Type: Single-circuit operational amplifier
Package: 8-pin SOIC
Comparar con TS941IDT →
STMicroelectronics
Amplifier Type: Single operational amplifier
Package: SOT-23-5, 5 pins
Comparar con TS941IDT →

TS941BIDT

✅ Sustitución directa
📦 8-SOIC
No measurable difference was reported in the principal technical parameters; the stated parametric match is 100%, while exact suffix grade and ordering details should be checked.

📋 Alternativa de referencia (no en el catálogo)

TS941IDT Valores máximos y características eléctricas

Amplifier Type General-purpose operational amplifier
Number of Circuits 1 circuit
Architecture Single operational amplifier
Tipo de salida Rail-to-rail
Power Class Micropower
Gain-Bandwidth Product 10 kHz
Encapsulado 8-SOIC
Tipo de montaje Surface mount
Número de pines 8 pins

Guía de configuración de pines de TS941IDT 8-soic

Configuración de pines para TS941IDT (encapsulado 8-soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-soic para TS941IDT

No hay datos detallados de patillaje disponibles para TS941IDT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TS941IDT es adecuado para 6 aplicacións: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Power Voltage Buffering, Industrial Slow-Control Loops, Low-Level Analog Interface, Precision Low-Frequency Signal Amplification.

🔋

Battery-Powered Sensor Conditioning

The TS941IDT fits low-energy sensor interfaces because it combines micropower operation, a single amplifier circuit, and rail-to-rail output voltage swing in an 8-SOIC package. The 10 kHz gain-bandwidth product is appropriate for temperature, pressure, and position sensors whose signals vary much more slowly than the amplifier bandwidth. Place the amplifier near the sensor connection, use a compact feedback network, and confirm that the selected output range covers the required sensor span. Rail-to-rail output behavior can improve utilization of a limited supply, but the exact input common-mode range, quiescent current, and output-swing limits must be checked before final battery-life and accuracy calculations.

📱

Portable Measurement Systems

The TS941IDT is suited to compact, portable measurement systems that amplify low-level analog conditions without requiring the bandwidth of a general-purpose high-speed amplifier. Its 1-circuit 8-SOIC configuration supports independent channels while preserving board area, and the 10 kHz gain-bandwidth product is suitable for slowly changing signals from resistive bridges and instrumentation transducers. Use short, guarded feedback routes to reduce coupling from adjacent circuits, and place the supply bypass capacitor close to the device. The design must account for input offset, bias current, and common-mode limitations when translating small sensor voltages into a useful output range.

⚡

Low-Power Voltage Buffering

The TS941IDT can buffer a reference or sensor voltage when the source has insufficient drive capability, while its rail-to-rail output helps preserve signal span in low-voltage systems. The 10 kHz gain-bandwidth product supports static voltage buffering and low-frequency control applications rather than fast transient reproduction. A voltage follower or inverting configuration can be implemented using the conventional operational-amplifier feedback arrangement. Keep the feedback loop compact to reduce parasitic coupling, and verify the output settling requirements for the intended signal rate. Input offset and bias errors must be included in the accuracy budget for high-impedance sources.

🏭

Industrial Slow-Control Loops

The TS941IDT is appropriate for slow industrial feedback loops where low power and a compact analog package are more important than wide bandwidth. Its 10 kHz gain-bandwidth product provides ample response for temperature, level, or actuator-position loops with moderate dynamics, while rail-to-rail output operation can increase control headroom. Place the amplifier close to the feedback divider and controller interface to minimize board-level noise pickup. The PCB should provide stable supply bypassing and a continuous ground return. Before deployment, verify that the loop crossover frequency remains comfortably below the device's small-signal bandwidth and that the output can reach the actuator's required operating range.

🔧

Low-Level Analog Interface

The TS941IDT is useful as the first active stage between a low-level analog source and a downstream measurement or control circuit. Its 1-circuit 8-SOIC format simplifies per-channel placement, and its 10 kHz bandwidth is sufficient for many process-control and instrumentation signals. The rail-to-rail output characteristic can help retain signal amplitude when operating near a supply limit. Use a stable reference for gain-setting resistors, maintain short feedback paths, and avoid routing the input beside switching nodes. Exact input offset, bias-current, noise, and common-mode specifications should be reviewed to determine whether the source impedance requires a different amplifier architecture.

📈

Precision Low-Frequency Signal Amplification

The TS941IDT can amplify precision, low-frequency signals where 10 kHz gain-bandwidth product is adequate and micropower operation is advantageous. It is suitable for slowly varying instrumentation outputs and low-current sensing paths rather than waveform or communications signals. A useful implementation places the device near the source, uses a high-impedance reference leg to establish gain, and includes local supply bypass. Because gain error at low frequencies depends on open-loop gain and offset, the actual resistor values and measurement bandwidth should be calculated with the manufacturer performance curves. Rail-to-rail output operation provides additional signal margin, subject to load and supply conditions.

Resumen de productos recomendados

TS941IDT STMicroelectronics Se usa en: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Power Voltage Buffering, Industrial Slow-Control Loops, Low-Level Analog Interface, Precision Low-Frequency Signal Amplification TS941BIDT Documented equivalent amplifier Se usa en: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Power Voltage Buffering, Industrial Slow-Control Loops, Low-Level Analog Interface, Precision Low-Frequency Signal Amplification
What is the TS941IDT?
The TS941IDT is a single-circuit, general-purpose operational amplifier from STMicroelectronics with micropower operation, rail-to-rail output voltage swing, and a 10 kHz gain-bandwidth product. According to the manufacturer datasheet, the device is offered in an 8-SOIC package and is intended for low-power signal-conditioning applications.
What are the key specifications of TS941IDT that engineers should know?
The TS941IDT combines one general-purpose amplifier, micropower operation, rail-to-rail output behavior, a 10 kHz gain-bandwidth product, and an 8-SOIC package. The manufacturer datasheet identifies it as a single amplifier optimized for low-power applications. Its low bandwidth makes it more appropriate for sensors and slow control loops than for high-speed signal processing.
Where can I download the TS941IDT datasheet PDF?
The TS941IDT datasheet PDF is available through the manufacturer documentation links and the listed technical-document pages. Use the STMicroelectronics datasheet to confirm supply voltage, common-mode range, offset voltage, bias current, quiescent current, electrical limits, and the complete SOIC-8 pin assignment before finalizing a circuit.
Where can I find the TS941IDT pinout?
The TS941IDT pinout is found in the manufacturer datasheet's pin-configuration section. The device uses an 8-SOIC package, but the exact names assigned to pins 1 through 8 must be taken from the pin-description table when assigning PCB tracks. Use that table together with the selected footprint and exposed or non-exposed pad information.
Where can I buy TS941IDT online?
Use the Request a Quote form on this page to request TS941IDT availability, order quantities, and current commercial terms. The part is a standard STMicroelectronics 8-SOIC operational amplifier, and the Request a Quote workflow is the appropriate channel for confirming supply, lot handling, and shipment details.
What is the price of TS941IDT?
Current TS941IDT pricing is not displayed as a static figure because commercial terms and availability can change with quantity and market conditions. Submit a request through the Request a Quote form on this page with your required quantity, target date, and shipment destination for a current quotation.
What is the lead time for TS941IDT?
The current lead time for TS941IDT should be confirmed through the Request a Quote form on this page. Lead time depends on requested quantity, stock position, date code requirements, and the manufacturing schedule. Providing a forecast and accepting an authorized-channel allocation can help the supplier evaluate the most practical fulfillment option.
Is TS941IDT in stock?
TS941IDT availability should be checked through the Request a Quote form on this page rather than through a static stock claim. A current distributor listing indicates that the part is commercially offered, but quantity and date-code availability can change. Include the required quantity, date-code preference, and delivery target in the request.
Can TS941BIDT replace TS941IDT?
TS941BIDT is the closest documented drop-in candidate for TS941IDT because a comparison source reports identical primary technical parameters. Both use the same 8-SOIC footprint and are identified as functionally equivalent for most designs. Confirm supply limits, common-mode range, offset, quiescent current, and exact pin names in the manufacturer documentation before production substitution.
What can replace TS941IDT?
TS941BIDT is the documented replacement candidate because it retains the same package and has no reported measurable difference in the principal technical parameters. Other substitutes should be selected only after checking the complete pinout, supply voltage, input and output ranges, bandwidth, offset, noise, quiescent current, and stability requirements. The Request a Quote form can confirm supply for the documented alternative.
Is TS941IDT the same as TS941BIDT?
TS941IDT and TS941BIDT are reported as functionally equivalent for most designs, with no measurable differences identified in their primary technical parameters. The practical distinction may be ordering or qualification information rather than circuit performance. Check the manufacturer ordering guide to confirm the exact temperature range, grade, package, and marking associated with each suffix.
When should I choose TS941IDT over another micropower op amp?
Choose TS941IDT when a single general-purpose amplifier with micropower operation, rail-to-rail output behavior, a 10 kHz gain-bandwidth product, and an 8-SOIC package matches the design. It is well matched to slow sensor signals and low-power analog conditioning. If a circuit needs higher bandwidth, lower offset, lower noise, or a wider input range, compare those requirements against the manufacturer ratings.
Is TS941IDT suitable for battery-powered sensor applications?
The TS941IDT is suitable for many battery-powered sensor-conditioning applications because it is characterized as micropower and includes rail-to-rail output operation. Its 10 kHz gain-bandwidth product is suitable for sensors whose output changes slowly compared with audio or communication signals. Confirm quiescent current and input bias behavior across the intended supply range before estimating battery life.
TS941IDT vs TS941BIDT: which is better for a new design?
TS941IDT and TS941BIDT have no reported measurable difference in their principal technical parameters, so either can serve the same 8-SOIC circuit when their ratings match. Selection should therefore focus on ordering grade, temperature range, qualification, marking, lifecycle status, and commercial availability. Use the manufacturer ordering information to identify the exact suffix differences.
What is the best STMicroelectronics equivalent for TS941IDT?
TS941BIDT is the best documented STMicroelectronics drop-in candidate because a direct comparison reports identical performance profiles and the devices share the 8-SOIC format. The replacement remains conditional on checking exact pin functions and all electrical limits for the ordered grade. No additional cross-brand drop-in part is identified by the available cross-reference material.

Datos de referencia de ingeniería para TS941IDT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose TS941IDT for compact, low-power analog interfaces requiring one general-purpose amplifier, a 10 kHz gain-bandwidth product, and rail-to-rail output behavior in an 8-SOIC package. It is well suited to slowly changing sensor signals, portable instrumentation, low-level buffering, and slow feedback loops. TS941BIDT is the preferred alternative when its ordering grade, qualification information, and commercial terms better fit the project, because the available comparison reports no measurable difference in principal performance parameters. Do not choose either device solely from package and bandwidth: verify supply voltage, input common-mode range, output swing, offset voltage, bias current, noise, quiescent current, and load stability. For high-speed waveforms, precision instrumentation with substantially lower offset, or applications requiring a wider input range, consider an amplifier with ratings that explicitly satisfy those requirements.

Comparación con alternativas

Parámetro Este producto TS941BIDT
Brand STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier
Number of Circuits 1 circuit 1 circuit
Output Type Rail-to-rail Rail-to-rail
Power Class Micropower Micropower
Gain-Bandwidth Product 10 kHz 10 kHz
Mounting Type Surface mount Surface mount
Performance Comparison Reference device No measurable difference reported in principal technical parameters

Diferenciadores clave

  • Directly documented drop-in equivalence (frente a TS941BIDT)
  • Micropower-oriented rail-to-rail output stage (frente a TS941BIDT)
  • No PCB footprint change for the documented replacement (frente a TS941BIDT)

Notas de diseño

Place the input bypass capacitor, output bypass capacitor, and feedback components close to the TS941IDT pins. Keep the sensitive input node short and avoid routing it parallel to switching-current paths. The 8-SOIC package is easy to assemble, but poor grounding or long feedback loops can degrade a slow analog signal more than expected. Use a solid ground plane and route the output toward the load only after the precision feedback node has been established.

Design the supply network around the device's actual operating current rather than its output-load capability alone. Micropower operation makes TS941IDT attractive for battery systems, but leakage from the sensor, feedback resistors, protection devices, and board contamination can dominate the standby budget. Evaluate the complete bias current with the intended source impedance and supply voltage, and use high-value resistors only where offset, bias current, and thermal effects remain acceptable.

Do not treat rail-to-rail output as proof that the input accepts every signal near the supply rails. Confirm the input common-mode range, maximum supply voltage, output load capability, and input offset in the manufacturer datasheet. Also verify that the signal bandwidth is well below the 10 kHz gain-bandwidth product and that the feedback network is stable with the intended capacitive loading.

For a voltage follower, keep the output-to-inverting-input route very short and place any output isolation resistor close to the amplifier. This minimizes capacitance at the sensitive node and helps preserve stability. When driving longer cables or higher-capacitance loads, validate the transient response on the assembled board because parasitic loading can interact with the amplifier's compensation and the application's feedback network.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available technical listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the manufacturer product documentation before regulatory use.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TS941IDT datasheet TS941IDT datasheet pdf TS941IDT pinout TS941IDT specifications TS941IDT SOIC-8 TS941IDT equivalent TS941IDT replacement TS941IDT drop-in replacement TS941IDT vs TS941BIDT TS941IDT price TS941IDT stock STMicroelectronics TS941IDT TS941IDT micropower op amp TS941IDT application circuit TS941IDT footprint

Componentes & términos relacionados

STMicroelectronics TS941IDT TS941BIDT operational amplifier general-purpose amplifier voltage-feedback amplifier linear amplifier signal-processing IC micropower amplifier rail-to-rail output gain-bandwidth product 10 kHz 8-SOIC SOIC package family surface-mount device single-circuit amplifier sensor signal conditioning portable instrumentation battery-powered circuit feedback control loop input common-mode range output voltage swing quiescent current RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ