WM8580GEFT/RV - 6-Channel Audio Codec | Cirrus Logic
N.º de pieza: WM8580GEFT/RV ✓ ActivoWM8580GEFT/RV Descripción general
An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog sound into a digital stream. The WM8580 belongs to the audio codec hierarchy within interface ICs, combining multichannel DAC and ADC functions, digital audio interfaces, clock recovery, and S/PDIF transmission or reception. This integration lets a system handle multiple playback and recording paths without implementing each converter as a separate discrete device.
Principal features include six-channel codec operation, 24-bit I2S resolution, a broad 8 kHz-to-192 kHz sampling-rate range, and support for I2C, SPI, I2S, and S/PDIF connections. Its integrated phase-locked loop supports synchronization of digital audio data, while link-status monitoring allows software to determine whether the digital link is operating correctly. These functions are useful in home theater, automotive audiovisual, DVD, and surround-sound systems.
The WM8580GEFT/RV supports digital supply operation from 2.7 V to 3.6 V and analog supply operation from 2.7 V to 5.5 V. That separation permits the digital interface and analog converter sections to use appropriate rail levels. The 48-pin TQFP construction provides external routing access for analog, digital, clock, and control signals while supporting conventional surface-mount assembly.
Typical uses include home hi-fi receivers, DVD player audio paths, surround-sound processors, automotive head units, and other audiovisual equipment requiring multiple analog channels plus S/PDIF connectivity. The integrated S/PDIF transceiver is especially useful when a design must pass digital audio between the codec, an amplifier, and external source equipment.
PCB design should keep analog and digital return currents separated and place decoupling capacitors close to the relevant supply pins. Confirm the clock topology, supported master or slave mode, and signal levels against the manufacturer datasheet before laying out the digital interface. The 7 mm by 7 mm TQFP footprint also requires adequate assembly clearance and thermal copper for reliable production handling.
This product record combines the WM8580GEFT/RV device identity, electrical and interface characteristics, sourcing information, comparison guidance, and practical integration considerations in one engineering-focused reference.
Alternativas directas para WM8580GEFT/RV — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con WM8580GEFT/RV (mismo factor de forma y huella) — difiere en Digital Audio Interface, Operating Temperature Range.
WM8580AGEFT/RV
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
WM8580GEFT/RV Valores máximos y características eléctricas
| Codec Channel Count | 6 channels |
| Audio Data Resolution | 24 bit |
| Digital Audio Interface | I2S |
| Sampling Rate Range | 8 kHz to 192 kHz |
| Digital Supply Voltage Range | 2.7 V to 3.6 V |
| Analog Supply Voltage Range | 2.7 V to 5.5 V |
| Control Interfaces | I2C, SPI, and I2S |
| Digital Audio Output | S/PDIF transceiver |
| Phase-Locked Loop | Built-in |
| Digital Gain | On-chip digital gain control |
| Mute Function | On-chip mute control |
| Link Monitoring | Link status monitoring |
| Rango de temperatura de funcionamiento | -25 °C to +85 °C |
| Encapsulado | 48-pin TQFP, 7 mm x 7 mm |
| Tipo de montaje | Surface mount |
| Process Technology | CMOS |
| Estado RoHS | Compliant |
Guía de configuración de pines de WM8580GEFT/RV 48-pin tqfp, 7 mm x 7 mm
Configuración de pines para WM8580GEFT/RV (encapsulado 48-pin tqfp, 7 mm x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para WM8580GEFT/RV.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
WM8580GEFT/RV es adecuado para 6 aplicacións: Home Theater Audio Receiver, DVD and Surround-Sound Processor, Automotive Audio Head Unit, Multichannel Amplifier Interface, Digital Audio Source Equipment, Surround-Sound Audio Processing.
Home Theater Audio Receiver
The WM8580GEFT/RV fits a home-theater receiver requiring several analog audio channels plus digital-audio connectivity. Its 6-channel codec architecture, 24-bit I2S interface, and integrated S/PDIF transceiver support playback and recording paths within one device. Sampling rates from 8 kHz to 192 kHz allow the same codec to handle low-rate surround-sound processing and high-rate digital sources. The 48-pin TQFP keeps the converter and digital interfaces in a compact surface-mount footprint. During design, place analog and digital return currents on separate paths and follow the manufacturer application circuit for decoupling, clock routing, and analog output filtering.
DVD and Surround-Sound Processor
The WM8580GEFT/RV is suitable for DVD players, surround-sound processors, and related home-hi-fi equipment that must combine multichannel conversion with S/PDIF output. Six channels provide the conversion resources needed for multiway speaker channels, while the integrated S/PDIF transceiver can distribute digital audio to amplifiers or source equipment. Its 24-bit I2S path and 192 kHz maximum sampling rate support high-resolution audio formats. The key implementation consideration is clock management: confirm whether the codec derives or accepts its audio clock, then route clock, data, and control signals according to the manufacturer datasheet to prevent synchronization errors.
Automotive Audio Head Unit
The WM8580GEFT/RV can serve in automotive audiovisual systems requiring multichannel audio conversion and an S/PDIF interface. Its 6-channel codec handles several analog channels, while 24-bit I2S and S/PDIF support digital audio links to source, amplifier, or processing circuitry. The listed operating range of -25 °C to +85 °C must be compared with the vehicle's temperature requirements and enclosure conditions. For production automotive designs, also verify the qualification status of the selected ordering variant. Grounding and decoupling require particular care because vehicle power systems introduce conducted noise and large supply transients.
Multichannel Amplifier Interface
The WM8580GEFT/RV is appropriate for a multichannel amplifier interface that requires DAC conversion, digital-audio input, and S/PDIF connectivity. The six-channel codec provides parallel analog outputs for downstream amplification, while the integrated phase-locked loop supports synchronization of digital audio streams. With sampling rates ranging from 8 kHz to 192 kHz, the device covers standard voice and broadcast rates as well as high-resolution playback. In layout, maintain short paths from the codec to output filtering and analog output stages, use a clean analog reference arrangement, and decouple supply pins locally to minimize conversion-related noise and crosstalk.
Digital Audio Source Equipment
The WM8580GEFT/RV can be used in CD players, source selectors, digital audio preamplifiers, and AV receivers that need both multichannel analog conversion and S/PDIF pass-through or output. Its integrated S/PDIF transceiver reduces the need for a separate transceiver when the system architecture includes a digital-audio link. The I2S and S/PDIF paths support 24-bit audio across an 8 kHz-to-192 kHz range, while I2C and SPI provide configuration and control options. Designers should verify master and slave clock arrangements, supported digital audio formats, and mute timing in the manufacturer datasheet before finalizing the source-routing matrix.
Surround-Sound Audio Processing
The WM8580GEFT/RV suits surround-sound processors that combine multiple audio channels with digital transmission to amplifiers or displays. Its 6-channel architecture supports the parallel analog paths commonly required by multichannel systems, and its integrated S/PDIF transceiver provides a standards-based digital output. The codec's 24-bit I2S format and wide sampling-rate range allow flexible selection between compressed-source output rates and high-resolution playback. Critical design work includes assigning the master clock coherently, controlling analog output scaling through the on-chip gain and mute functions, and checking link status so downstream firmware can identify loss of the digital-audio connection.
Datos de referencia de ingeniería para WM8580GEFT/RV — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | WM8580AGEFT/RV |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) |
| Codec Channel Count | 6 channels | 6 channels |
| Audio Interface | 24-bit I2S | I2S audio interface |
| S/PDIF Support | Integrated S/PDIF transceiver | S/PDIF support |
Diferenciadores clave
- Combines multichannel conversion with digital-audio transmission (frente a WM8580AGEFT/RV)
- Broad sampling-rate coverage in one audio converter (frente a WM8580AGEFT/RV)
- Separate digital and analog supply ranges (frente a WM8580AGEFT/RV)
Notas de diseño
Separate analog and digital return-current paths and place the analog and digital decoupling capacitors directly beside their associated supply pins. Keep the S/PDIF and I2S routes away from sensitive analog inputs, and follow the manufacturer datasheet's clock and grounding topology. The 48-pin TQFP footprint also leaves little room for long escape routes, so assign pins according to the published application circuit before finalizing placement.
Treat the audio clock as a high-priority signal. Confirm master or slave operation, supported clock ratios, and the relationship between the external system clock, S/PDIF clock, and codec sampling rate before layout. Use short, continuous clock traces, avoid unnecessary stubs, and maintain a continuous reference plane. A stable clock relationship is essential because the integrated phase-locked loop supports synchronization of the digital audio stream.
Do not power the analog and digital sections from an arbitrary rail combination. The WM8580GEFT/RV specifies 2.7 V to 3.6 V for the digital supply and 2.7 V to 5.5 V for the analog supply. Validate startup ordering, control-pin states, mute behavior, and analog-output settling against the manufacturer datasheet. Also distinguish the 7 mm by 7 mm TQFP body from its lead span and full land pattern when creating the PCB footprint.
Información de cumplimiento
The component listing identifies RoHS compliance. No automotive qualification is stated for the WM8580GEFT/RV; qualification of the WM8580AGEFT/RV must be confirmed separately.