Cirrus Logic Inc.

WM8594SEFT/V - 24-Bit 192kHz Audio Codec | Cirrus Logic

N.º de pieza: WM8594SEFT/V ✓ Activo
48-pin TQFP, 7 mm x 7 mm Package
MOQ: 1 |

WM8594SEFT/V Descripción general

Cirrus Logic WM8594SEFT/V is a high-performance 24-bit, 192kHz, multi-channel audio codec with flexible analog input and output selection, digital and analog volume control, and support for 2Vrms signals. The device is packaged in a 48-pin TQFP measuring 7mm by 7mm, making it suitable for compact consumer, communications, and multimedia audio systems.

An audio codec is an interface IC that converts between analog audio signals and a digital audio data stream. Within the product hierarchy, a codec combines an analog-to-digital converter, digital-to-analog converter, routing logic, and audio signal management into one integrated circuit. This integration allows a host processor to exchange digital audio data while the codec handles analog input selection, output routing, gain control, and signal conversion.

The WM8594SEFT/V supports 24-bit audio operation at a maximum sampling rate of 192kHz and accommodates 2Vrms multi-channel audio. Its flexible input and output selection allows multiple analog sources and destinations to be routed through the device, while digital and analog volume controls provide attenuation and gain adjustment within the audio signal chain. These features make the codec suitable for multi-zone entertainment equipment, communications terminals, recording interfaces, and other systems requiring more than a basic stereo codec.

As a mixed-signal device, the WM8594SEFT/V requires careful treatment of analog signal integrity and digital clock routing. Its multi-channel architecture can simplify board design by consolidating several audio functions, but correct grounding, decoupling, impedance control, and clock implementation remain essential. The analog and digital sections should use a controlled layout that minimizes coupling between high-gain audio paths, switching clocks, digital control buses, and external power-supply nodes.

Typical uses include powered speakers, home-audio equipment, automotive infotainment systems, telephones, personal-audio products, and multimedia appliances. The 192kHz capability is useful when the source system requires high-resolution digital audio, while the 2Vrms interface capability can reduce gain constraints in conventional line-level audio paths. External amplifiers may still be required when the codec must directly drive low-impedance speakers rather than line-level inputs.

For a new layout, follow the manufacturer datasheet for the pin-description table, recommended application circuit, decoupling network, clock requirements, and exposed routing guidance. Verify the exact input and output topology, analog signal ranges, digital audio interface format, and supported clocks before finalizing the PCB. Because this page is synthesized from the listed manufacturer and distributor resources, its main added value is a design-oriented summary of the codec's use cases, sourcing requirements, and selection considerations.

Alternativas directas para WM8594SEFT/V — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

WM8594SEFT/V Valores máximos y características eléctricas

Product Type Multi-channel audio codec
Manufacturer Cirrus Logic
Original Manufacturer Wolfson Microelectronics plc
Bit Resolution 24 bit
Maximum Sampling Rate 192 kHz
Analog Signal Level 2 Vrms
Input Selection Flexible multi-channel input selection
Output Selection Flexible multi-channel output selection
Digital Volume Control Supported
Analog Volume Control Supported
Serial Audio Interface 24-bit serial audio interface
Encapsulado 48-pin TQFP, 7 mm x 7 mm
Tipo de montaje Surface mount

Guía de configuración de pines de WM8594SEFT/V 48-pin tqfp, 7 mm x 7 mm

Configuración de pines para WM8594SEFT/V (encapsulado 48-pin tqfp, 7 mm x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 48-pin tqfp, 7 mm x 7 mm para WM8594SEFT/V

No hay datos detallados de patillaje disponibles para WM8594SEFT/V.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

WM8594SEFT/V es adecuado para 6 aplicacións: High-Resolution Home Audio, Automotive Infotainment Audio, Communications Terminal Audio, Powered Speaker and Amplifier Front End, Multichannel Recording Interface, Gaming and Multimedia Console.

🎧

High-Resolution Home Audio

The WM8594SEFT/V fits high-resolution home-audio systems that receive digital audio from a host decoder and require multiple analog line outputs. Its 24-bit operation, support for sampling rates up to 192kHz, and 2Vrms signal handling provide a suitable interface for a high-performance playback chain. Flexible output selection and analog volume control simplify channel management when the design includes multiple analog destinations. The codec should sit near the line-level input of the output amplifier, with short, shielded-when-needed analog traces and separate return paths. Verify the digital-audio format, sample-rate support, clock source, and codec gain range against the host and amplifier requirements before releasing the PCB.

🚗

Automotive Infotainment Audio

The WM8594SEFT/V can support the audio-conversion stage of an infotainment or head-unit design requiring flexible analog routing and high-resolution digital audio. Its 24-bit interface, 192kHz maximum sampling rate, and multi-channel volume control are relevant when the host processor supplies multimedia audio for several zones. Because the available product information does not establish AEC-Q100 status or temperature limits, an automotive design must verify qualification and environmental requirements for the exact ordering code. The implementation should isolate codec clocks and switching supplies from microphone, auxiliary-input, and output paths while following the manufacturer reference layout for decoupling and grounding.

📱

Communications Terminal Audio

The WM8594SEFT/V is applicable to communications terminals where a host processor handles call audio but the board also needs analog microphone, line, speaker, or headset routing. Flexible analog input and output selection can consolidate several audio paths, while digital and analog volume control permits gain adjustment within the codec domain. For voice terminals, keep microphone inputs away from clocks and power converters, use the manufacturer grounding strategy, and evaluate the complete signal chain before setting software gain. The codec processes conversion and routing but does not eliminate the need for microphone biasing, output amplifiers, ESD protection, or acoustic-system design.

🔊

Powered Speaker and Amplifier Front End

The WM8594SEFT/V can serve as the digital-to-analog and routing front end of a powered-speaker system when the device drives a line-level amplifier rather than a low-impedance speaker directly. Its 2Vrms signal capability can provide a conventional line-level interface, and its 192kHz capability supports high-resolution sources when the complete amplifier chain preserves that performance. Flexible output selection is useful for multiple speaker zones, while analog volume control permits local attenuation. External power amplifiers remain necessary for loudspeaker drive, and the designer should confirm output drive capability, DC offset behavior, and idle-noise performance from the manufacturer data before selecting the codec.

🎙️

Multichannel Recording Interface

The WM8594SEFT/V is suitable for a multichannel recording interface when the system needs synchronized conversion and flexible selection among analog input and output paths. The 24-bit, 192kHz specification provides enough resolution and bandwidth for high-quality capture or monitoring, while digital and analog volume controls support gain staging. For recording equipment, the clock architecture is critical: the host clock, codec master clock, and serial-audio timing must meet the interface requirements in the manufacturer datasheet. Input routing and gain must also be evaluated together to preserve headroom and minimize distortion across the selected channel set.

🖥️

Gaming and Multimedia Console

The WM8594SEFT/V fits gaming consoles, streaming devices, and multimedia appliances that combine digital media playback with analog line-level outputs. Its 24-bit, 192kHz conversion capability can support high-resolution audio streams, while flexible channel selection and two forms of volume control help designers manage multiple output paths. Practical implementation requires careful separation of audio traces from switching regulators, high-speed clocks, and digital control buses. Follow the manufacturer application circuit for local decoupling and grounding, and verify whether the selected digital-audio interface supports the host processor's data width, frame format, and master-clock arrangement.

What is the WM8594SEFT/V?
The WM8594SEFT/V is a high-performance, multi-channel audio codec from Cirrus Logic. According to the manufacturer documentation indexed for the WM8594SEFT/V, it supports 24-bit digital audio, operation up to 192kHz, and 2Vrms analog signals, with flexible input and output selection plus digital and analog volume control. It is packaged in a 48-pin TQFP measuring 7mm by 7mm.
What are the key specifications of WM8594SEFT/V that engineers should know?
The WM8594SEFT/V combines 24-bit resolution, a maximum sampling rate of 192kHz, and 2Vrms signal handling in a 48-pin 7mm by 7mm TQFP. The manufacturer datasheet identifies flexible analog input and output selection together with separate digital and analog volume-control functions. These features distinguish it as a multi-channel audio interface rather than a basic fixed-channel stereo codec.
Where can I download the WM8594SEFT/V datasheet PDF?
The WM8594SEFT/V datasheet can be accessed through the Wolfson Microelectronics document indexed by AllDataSheet at the datasheet URL listed on this page. The indexed document identifies the part as a 24-bit, 192kHz, 2Vrms multi-channel codec. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, application circuit, clocking information, and layout requirements.
Where can I find the WM8594SEFT/V pinout?
The authoritative WM8594SEFT/V pinout is in the manufacturer datasheet's pin-description table for the 48-pin TQFP package. Use the diagram to assign digital-audio, clock, control, analog input, analog output, power, and ground connections before routing the PCB. The package representation on this page is identified as 48-pin TQFP, but individual pin names are not published on this page.
Is the WM8594SEFT/V suitable for high-resolution audio?
Yes, the WM8594SEFT/V is suitable for high-resolution audio applications because the manufacturer documentation specifies 24-bit operation up to 192kHz. That capability is appropriate for professional or premium playback, recording, communications, and multimedia designs whose digital source supports the corresponding sample rate and interface configuration. System performance also depends on the external clocking, analog implementation, and downstream amplifier.
What can replace the WM8594SEFT/V?
A drop-in replacement for the WM8594SEFT/V must use the same 48-pin TQFP footprint and preserve pin-level analog, digital-audio, clock, control, power, and ground functions. No verified drop-in substitute is identified in the available cross-reference results. The part should therefore be treated as a device-specific selection until manufacturer pin mapping and parameter equivalence have been confirmed for a candidate.
Is the WM8594SEFT/V the same as another Cirrus Logic codec?
The WM8594SEFT/V is not interchangeable with another Cirrus Logic audio codec merely because the devices share a resolution or sample-rate rating. Its identity is defined by the exact 48-pin TQFP pinout, supported digital-audio interface, clock configuration, analog routing, register map, and control functions. Use the manufacturer pin and register information to determine whether a different codec is functionally and physically compatible.
WM8594SEFT/V versus WM8985CGEFL: which is better for a multichannel audio design?
The WM8594SEFT/V is the better starting point when a design specifically requires its documented 24-bit, 192kHz, 2Vrms multi-channel codec architecture and its exact 48-pin TQFP interface. The WM8985CGEFL belongs to a different Cirrus Logic family and cannot be assumed pin-compatible. The correct comparison must cover package pins, digital-audio format, clocking, analog signal range, routing, control registers, and power requirements.
What is the best cross-brand equivalent for the WM8594SEFT/V?
No cross-brand equivalent can be recommended as a verified drop-in replacement from the available cross-reference information. A valid equivalent would need to match the WM8594SEFT/V's 48-pin TQFP footprint and provide equivalent 24-bit, 192kHz conversion, 2Vrms analog compatibility, routing, volume control, clocking, and register-level operation. Similar headline specifications alone do not establish drop-in compatibility.
When should I choose the WM8594SEFT/V over another multi-channel audio codec?
Choose the WM8594SEFT/V when the system specification already calls for a 24-bit, 192kHz, 2Vrms multi-channel codec with flexible analog routing and both digital and analog volume control. Its 48-pin TQFP also provides a defined 7mm by 7mm surface-mount solution. Select another codec instead when its interface, power architecture, clocking, package, or functional feature set offers a better system fit.
Is the WM8594SEFT/V suitable for automotive infotainment?
The WM8594SEFT/V is functionally suitable for infotainment audio only after the design verifies its electrical limits, temperature range, clocking, and automotive qualification requirements. The available product listing does not state AEC-Q100 qualification. Use the manufacturer datasheet and the exact ordering information for the intended production configuration before treating the codec as suitable for automotive deployment.
Where can I buy the WM8594SEFT/V online?
Use the Request a Quote form on this page to request current availability, lead time, minimum order quantity, and commercial terms for the WM8594SEFT/V. The exact part is listed as a Cirrus Logic 48-pin TQFP audio codec with a 24-bit serial interface and 192kHz operation. Request the manufacturer ordering suffix and delivery packaging explicitly when submitting the inquiry.
What is the price of the WM8594SEFT/V?
Current pricing for the WM8594SEFT/V is handled through the Request a Quote form on this page because no exact-MPN quantity-break table with an explicit quantity is shown in the available product listings. The quote should specify the required quantity, delivery package, target lead time, and destination. This keeps the commercial inquiry tied to the exact WM8594SEFT/V configuration.
What is the lead time for the WM8594SEFT/V?
The current lead time and stock position for the WM8594SEFT/V should be requested through the Request a Quote form on this page. The available distributor listing indicates that the exact part is offered, but it does not provide a fixed lead-time figure or a verified quantity-break schedule. Include your required annual and prototype quantities so the supplier can confirm an appropriate supply plan.
Is the WM8594SEFT/V in stock?
The current stock status for the WM8594SEFT/V should be confirmed through the Request a Quote form on this page. Distributor and marketplace listings identify the exact part, but the available information does not state a dependable live inventory quantity for every channel. A quotation response can confirm stock, allocation, lead time, and the required delivery packaging for the intended order.
What power and thermal constraints apply when designing with the WM8594SEFT/V?
Power and thermal design must be based on the manufacturer datasheet's operating-voltage limits, supply currents, analog-output operating conditions, and package thermal data. For a linear estimate, multiply the measured supply voltage by the measured supply current to obtain input power, then subtract output power to estimate internal dissipation. Add that estimated dissipation to the calculation for junction-temperature rise using the PCB-specific thermal resistance.
How should the WM8594SEFT/V PCB layout handle analog and digital signals?
The WM8594SEFT/V layout should separate sensitive analog input and output paths from digital-audio clocks, control signals, and switching-power nodes. Follow the manufacturer application circuit for component placement, grounding, decoupling, and clock routing. Keep analog traces short, use a continuous ground reference where appropriate, and consult the pin-description table so that power, ground, signal, and exposed-package requirements are assigned correctly.

Datos de referencia de ingeniería para WM8594SEFT/V — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the WM8594SEFT/V when the design already requires a 24-bit, 192kHz, 2Vrms multi-channel codec with flexible analog routing and both digital and analog volume control. Its 48-pin 7mm by 7mm TQFP package is appropriate for compact surface-mount audio systems, but the pinout, clock architecture, and register configuration must be implemented exactly as documented. WM8985CGEFL, WM8860GEFL/V, and other codecs should be considered only for their respective architectures, not as assumed drop-in parts. If a different manufacturer is preferred, require a verified 48-pin pin mapping, compatible serial-audio interface, equivalent clocking, matching analog levels, and a documented control path. Use the Request a Quote form for current supply, lead-time, and exact-ordering-code confirmation.

Comparación con alternativas

Parámetro Este producto
Brand Cirrus Logic
Package 48-pin TQFP, 7 mm x 7 mm
Product Type Multi-channel audio codec
Bit Resolution 24 bit
Maximum Sampling Rate 192 kHz
Analog Signal Level 2 Vrms
Input Selection Flexible multi-channel selection
Output Selection Flexible multi-channel selection
Digital Volume Control Supported
Analog Volume Control Supported

Diferenciadores clave

  • High-resolution multi-channel conversion (frente a WM8985CGEFL)
  • Concurrent digital and analog gain control (frente a WM8860GEFL/V)
  • 2Vrms-oriented analog signal handling (frente a WM8963ECSN/R)

Notas de diseño

Separate sensitive analog input and output routing from the digital-audio interface, clock lines, control bus, and switching-power nodes. Use the manufacturer application circuit as the basis for placement, and keep analog traces short with a continuous return path. Place local bypass capacitors at the associated supply pins rather than distributing them along the PCB edge. This prevents codec clock and regulator-switching energy from coupling into high-gain audio channels.

Confirm the supported digital-audio format, clock polarity, data timing, and master-clock arrangement before assigning the codec's serial interface. Route clock and data as a controlled group, provide a continuous ground reference, and avoid test pads or long stubs on sensitive nets. When the board also carries high-speed digital or switching circuitry, review return-current paths to keep codec clock jitter and analog noise within the system requirements.

Estimated thermal calculation: measure input power as VIN multiplied by total supply current, subtract output power, and treat the remainder as internal dissipation before applying the PCB-specific thermal resistance to estimate junction-temperature rise. Actual results depend on channel loading, output voltage, clocking, ambient temperature, and copper area. Confirm absolute maximum and recommended operating limits in the manufacturer datasheet before selecting regulators or capacitors.

Do not treat another 24-bit, 192kHz codec as a drop-in replacement merely because the headline specifications match. Verify every pin, the digital-audio protocol, master-clock requirements, control-register map, analog input range, output-drive capability, and power sequence. Software for the WM8594SEFT/V should not be assumed to operate another codec without a documented register and timing mapping.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance and qualification claims require confirmation from the manufacturer datasheet or the exact product documentation. The available listing identifies the part and its audio-codec specifications but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status.

Búsquedas relacionadas

WM8594SEFT/V datasheet WM8594SEFT/V datasheet pdf WM8594SEFT/V pinout WM8594SEFT/V specifications WM8594SEFT/V equivalent WM8594SEFT/V replacement WM8594SEFT/V cross reference WM8594SEFT/V TQFP-48 WM8594SEFT/V price WM8594SEFT/V stock Cirrus Logic WM8594SEFT/V WM8594SEFT/V application circuit

Componentes & términos relacionados

Cirrus Logic Wolfson Microelectronics plc WM8594SEFT/V WM8594SE audio codec mixed-signal IC analog-to-digital converter digital-to-analog converter digital audio interface 24-bit audio 192kHz sampling rate 2Vrms signal level digital volume control analog volume control multi-channel routing 48-pin TQFP TQFP-48 surface mount SMD home audio automotive infotainment communications terminal multichannel recording gaming audio
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ