XC7A35T-L1FGG484I - Low-Power Artix-7 FPGA | AMD
N.º de pieza: XC7A35T-L1FGG484I ✓ ActivoXC7A35T-L1FGG484I Descripción general
An FPGA is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. Within the product hierarchy, the XC7A35T belongs to the Artix-7 family of FPGAs, which are programmable-logic devices under the broader semiconductor category. Rather than executing a fixed instruction set, the device implements application-specific datapaths, control logic, signal processing, and interface functions in parallel hardware. This makes an FPGA suitable when deterministic timing, parallel processing, flexible I/O, or field reconfiguration is more important than the simplicity of a fixed-function processor.
The principal device figures are 33,280 logic cells, 1,843,200 block RAM bits, 250 user I/O, and a 484-BBGA package. The package provides a substantial interconnect and I/O capacity for industrial control, communications, instrumentation, embedded vision, and general-purpose prototyping systems. The exact core, auxiliary, differential, and configuration pin assignments must be taken from the Artix-7 package pinout files before PCB routing.
The L1 grade differentiates this member by its low-power operating characteristics within the Artix-7 family. At VCCINT of 0.9 V, a -2L device can reduce static and dynamic power relative to operation at 1.0 V, although the specific power reduction must be evaluated against the manufacturer’s operating tables. The -1 suffix identifies the performance grade, FGG identifies the 484-ball package, and I identifies the industrial temperature option. Design tools, bitstreams, configuration requirements, and PCB constraints must be reconsidered whenever the grade, package, or device selection changes.
Typical uses include industrial automation, camera and image-processing pipelines, low-latency communications, test and measurement equipment, motor-control systems, and embedded signal-processing platforms. A design should allocate pins using the manufacturer’s package files, validate high-speed interfaces against the appropriate Artix-7 datasheet tables, and program the device with the matching device identifier in the FPGA implementation toolchain.
Power and signal-integrity planning are especially important in a 484-ball BGA. Place decoupling capacitors close to the relevant supply pins, route power and ground planes carefully, and keep high-speed interfaces away from noisy return paths. Verify the completed layout with the manufacturer’s Artix-7 package pinout files, design constraints, and PCB implementation guidance rather than relying on an inferred pin map.
Alternativas directas para XC7A35T-L1FGG484I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC7A35T-L1FGG484I (mismo factor de forma y huella) — difiere en Package, Block RAM, Logic Cells, Mounting Type, Process Technology.
XC7A35T-1FGG484I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7A35T-1FGG484C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7A35T-1FGG484E
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7A35T-2FGG484I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7A35T-2FGG484I
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC7A35T-3FGG484I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7A35T-L1FGG484I Valores máximos y características eléctricas
| Device Type | Artix-7 FPGA |
| Logic Cells | 33,280 cells |
| Block RAM | 1,843,200 bits |
| User I/O | 250 I/O |
| Encapsulado | 484-BBGA FGG484 |
| Tipo de montaje | Surface Mount |
| Speed Grade | -1 |
| Power Grade | L1 low-power grade |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40 °C to +100 °C |
| Programmable Logic Type | Configuration-based programmable logic |
| Core Supply Voltage at 0.9 V | 0.9 V |
| Core Supply Voltage at 1.0 V | 1.0 V |
| Package Pin Count | 484 pins |
Guía de configuración de pines de XC7A35T-L1FGG484I 484 pins
Configuración de pines para XC7A35T-L1FGG484I (encapsulado 484 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC7A35T-L1FGG484I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC7A35T-L1FGG484I es adecuado para 6 aplicacións: Industrial Automation and Control, Machine Vision and Image Processing, Industrial Communication Gateway, Test and Measurement Equipment, Motor Control and Power Systems, Embedded Signal Processing.
Industrial Automation and Control
The XC7A35T-L1FGG484I fits industrial automation controllers that combine deterministic logic, multiple communication interfaces, and extensive I/O in a single device. Its 33,280 logic cells and 250 user I/O provide capacity for control sequencing, data acquisition, and protocol handling, while the L1 grade supports power-conscious implementations. The 484-ball FGG484 package also offers ample routing options for mixed-speed control and communications. Engineers should assign every ball from the manufacturer package file, isolate noisy actuator drive from sensitive logic, and validate the final operating temperature against the device’s -40 °C to +100 °C junction range.
Recomendado
Machine Vision and Image Processing
The XC7A35T-L1FGG484I can implement parallel image-processing pipelines where sensor data must be filtered, thresholded, and transferred with predictable timing. Its 33,280 logic cells and 1,843,200 block RAM bits are useful for line buffers, feature extraction, and frame-processing functions, while 250 user I/O support camera interfaces, controls, and diagnostics. The L1 designation is appropriate when the FPGA is expected to remain active during continuous acquisition and thermal management is important. Use the manufacturer’s I/O standards and package pinout to assign high-speed data lanes, and keep camera clocks away from switching power and motor-control return paths.
Recomendado
Industrial Communication Gateway
The XC7A35T-L1FGG484I is suitable for a communications gateway that terminates multiple serial or parallel interfaces and performs protocol conversion. Its 250 user I/O allow simultaneous fieldbus, Ethernet PHY, control, and status connections, while 33,280 logic cells support framing, buffering, and protocol state machines. The industrial-temperature construction and low-power L1 grade align with continuously operating equipment. Place protection devices near external connectors, route slow control signals separately from high-speed data, and use the package pinout files to preserve the bank-specific constraints required by each I/O standard.
Recomendado
Test and Measurement Equipment
The XC7A35T-L1FGG484I can implement programmable timing, trigger, waveform, or protocol-analysis logic in compact test equipment. The 1,843,200 block RAM bits support acquisition buffers, while 33,280 logic cells provide parallel datapath resources and 250 user I/O connect instruments, controls, and displays. The L1 grade may reduce power when the instrument performs intermittent measurements, but thermal analysis must include FPGA activity and adjacent circuitry. Use short, controlled impedance routing for acquisition signals, provide solid return paths beneath high-speed interfaces, and follow the manufacturer’s guidance for clocking, decoupling, and configuration pins.
Recomendado
Motor Control and Power Systems
The XC7A35T-L1FGG484I fits embedded motor-control and power-system logic requiring parallel computation, precise sequencing, and numerous digital connections. The device can coordinate control loops, fault handling, and supervisory logic using its 33,280 logic cells, while 250 user I/O connect position sensors, gate-control signals, and status interfaces. Its -40 °C to +100 °C industrial junction range supports appropriately designed industrial equipment. Keep FPGA switching activity and sensitive timing paths separated from high-current switching nodes, validate every I/O voltage domain against the selected bank power, and include decoupling and thermal analysis in the power-converter layout.
Recomendado
Embedded Signal Processing
The XC7A35T-L1FGG484I supports parallel filtering, correlation, modulation, and digital front-end functions where flexible datapaths are advantageous. Its 33,280 logic cells provide programmable logic capacity, 1,843,200 block RAM bits support deeper data storage, and 250 user I/O connect converters, samplers, and control logic. The L1 grade is useful when low-power operation is important, although actual consumption must be calculated from utilization, activity, clocking, and I/O loading. Establish timing constraints for every clock domain, use supported clocking resources, and reserve FPGA configuration access so the bitstream can be loaded and monitored reliably in the finished system.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC7A35T-L1FGG484I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC7A35T-1FGG484I | XC7A35T-1FGG484C | XC7A35T-1FGG484E | XC7A35T-2FGG484I | XC7A35T-3FGG484I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | FBGA-484 (FGG484) | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same |
| Series | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| Block RAM | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits |
| User I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O |
| Speed Grade | -1 | -1 | -1 | -1 | -2 | -3 |
| Temperature Designation | I industrial temperature | I industrial temperature | C commercial temperature | E extended temperature | I industrial temperature | I industrial temperature |
Diferenciadores clave
- Low-power Artix-7 operating option (frente a XC7A35T-1FGG484I)
- Maintains the established 35T resource configuration (frente a XC7A35T-2FGG484I)
- Industrial-temperature option in the same footprint (frente a XC7A35T-1FGG484C)
- PCB reuse within the Artix-7 35T family (frente a XC7A35T-3FGG484I)
Notas de diseño
Assign the FGG484 footprint from the manufacturer package pinout files rather than from a generic BGA drawing. Start with the exact 484-ball land pattern, verify all power, ground, configuration, clock, and user-I/O assignments, and cross-check the PCB library against the package file before fabrication. A single incorrect high-voltage bank or configuration connection can prevent startup or damage adjacent circuitry even when the logical design is correct.
Plan each supply rail around the required core and I/O voltages, the selected bank configuration, and the device’s permitted operating limits. Place the required bypass capacitors directly at the corresponding balls, provide a low-impedance return path, and distribute high-current connections across multiple balls as specified by the package documentation. Estimate total rail power from the actual design utilization and activity rather than relying on a single nominal device figure.
Assign high-speed interfaces to banks with valid clocking resources and supported I/O standards, then apply device-specific timing constraints to every external interface. Keep clocks away from high-current switching nodes, minimize stubs and unnecessary vias, and provide continuous reference-plane returns. Validate the final routing against the manufacturer’s Artix-7 package and design guidance, including any bank-power and clocking relationships required by the selected speed grade.
Do not treat every XC7A35T suffix combination as electrically interchangeable. The L1, -1, and I identifiers affect power behavior, performance, and temperature capability, while the FGG484 suffix determines the PCB footprint. When changing devices, regenerate the tool target, review the device settings and constraints, confirm that the bitstream supports the new part, and repeat timing and power sign-off rather than reusing results from the original configuration.
Información de cumplimiento
The manufacturer’s Artix-7 package pinout resource is identified, but no explicit product-level RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact MPN.