XC7A35T-L1FGG484I - Low-Power Artix-7 FPGA | AMD
MPN: XC7A35T-L1FGG484I ✓ 啟用中XC7A35T-L1FGG484I 概覽
An FPGA is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. Within the product hierarchy, the XC7A35T belongs to the Artix-7 family of FPGAs, which are programmable-logic devices under the broader semiconductor category. Rather than executing a fixed instruction set, the device implements application-specific datapaths, control logic, signal processing, and interface functions in parallel hardware. This makes an FPGA suitable when deterministic timing, parallel processing, flexible I/O, or field reconfiguration is more important than the simplicity of a fixed-function processor.
The principal device figures are 33,280 logic cells, 1,843,200 block RAM bits, 250 user I/O, and a 484-BBGA package. The package provides a substantial interconnect and I/O capacity for industrial control, communications, instrumentation, embedded vision, and general-purpose prototyping systems. The exact core, auxiliary, differential, and configuration pin assignments must be taken from the Artix-7 package pinout files before PCB routing.
The L1 grade differentiates this member by its low-power operating characteristics within the Artix-7 family. At VCCINT of 0.9 V, a -2L device can reduce static and dynamic power relative to operation at 1.0 V, although the specific power reduction must be evaluated against the manufacturer’s operating tables. The -1 suffix identifies the performance grade, FGG identifies the 484-ball package, and I identifies the industrial temperature option. Design tools, bitstreams, configuration requirements, and PCB constraints must be reconsidered whenever the grade, package, or device selection changes.
Typical uses include industrial automation, camera and image-processing pipelines, low-latency communications, test and measurement equipment, motor-control systems, and embedded signal-processing platforms. A design should allocate pins using the manufacturer’s package files, validate high-speed interfaces against the appropriate Artix-7 datasheet tables, and program the device with the matching device identifier in the FPGA implementation toolchain.
Power and signal-integrity planning are especially important in a 484-ball BGA. Place decoupling capacitors close to the relevant supply pins, route power and ground planes carefully, and keep high-speed interfaces away from noisy return paths. Verify the completed layout with the manufacturer’s Artix-7 package pinout files, design constraints, and PCB implementation guidance rather than relying on an inferred pin map.
直接替換替代品,適用於 XC7A35T-L1FGG484I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7A35T-L1FGG484I (相同外形與佔位) — 差異在於 Package, Block RAM, Logic Cells, Mounting Type, Process Technology.
XC7A35T-1FGG484I
✅ 直接替換聯絡詢價
查看資料表 →XC7A35T-1FGG484C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A35T-1FGG484E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A35T-2FGG484I
✅ 直接替換聯絡詢價
查看資料表 →XC7A35T-2FGG484I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A35T-3FGG484I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A35T-L1FGG484I 最大額定值與電氣特性
| Device Type | Artix-7 FPGA |
| Logic Cells | 33,280 cells |
| Block RAM | 1,843,200 bits |
| User I/O | 250 I/O |
| 封裝 | 484-BBGA FGG484 |
| 安裝類型 | Surface Mount |
| Speed Grade | -1 |
| Power Grade | L1 low-power grade |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40 °C to +100 °C |
| Programmable Logic Type | Configuration-based programmable logic |
| Core Supply Voltage at 0.9 V | 0.9 V |
| Core Supply Voltage at 1.0 V | 1.0 V |
| Package Pin Count | 484 pins |
XC7A35T-L1FGG484I 484 pins 腳位配置指南
XC7A35T-L1FGG484I(484 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7A35T-L1FGG484I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A35T-L1FGG484I 適用於 6 應用s: Industrial Automation and Control, Machine Vision and Image Processing, Industrial Communication Gateway, Test and Measurement Equipment, Motor Control and Power Systems, Embedded Signal Processing.
Industrial Automation and Control
The XC7A35T-L1FGG484I fits industrial automation controllers that combine deterministic logic, multiple communication interfaces, and extensive I/O in a single device. Its 33,280 logic cells and 250 user I/O provide capacity for control sequencing, data acquisition, and protocol handling, while the L1 grade supports power-conscious implementations. The 484-ball FGG484 package also offers ample routing options for mixed-speed control and communications. Engineers should assign every ball from the manufacturer package file, isolate noisy actuator drive from sensitive logic, and validate the final operating temperature against the device’s -40 °C to +100 °C junction range.
推薦
Machine Vision and Image Processing
The XC7A35T-L1FGG484I can implement parallel image-processing pipelines where sensor data must be filtered, thresholded, and transferred with predictable timing. Its 33,280 logic cells and 1,843,200 block RAM bits are useful for line buffers, feature extraction, and frame-processing functions, while 250 user I/O support camera interfaces, controls, and diagnostics. The L1 designation is appropriate when the FPGA is expected to remain active during continuous acquisition and thermal management is important. Use the manufacturer’s I/O standards and package pinout to assign high-speed data lanes, and keep camera clocks away from switching power and motor-control return paths.
推薦
Industrial Communication Gateway
The XC7A35T-L1FGG484I is suitable for a communications gateway that terminates multiple serial or parallel interfaces and performs protocol conversion. Its 250 user I/O allow simultaneous fieldbus, Ethernet PHY, control, and status connections, while 33,280 logic cells support framing, buffering, and protocol state machines. The industrial-temperature construction and low-power L1 grade align with continuously operating equipment. Place protection devices near external connectors, route slow control signals separately from high-speed data, and use the package pinout files to preserve the bank-specific constraints required by each I/O standard.
推薦
Test and Measurement Equipment
The XC7A35T-L1FGG484I can implement programmable timing, trigger, waveform, or protocol-analysis logic in compact test equipment. The 1,843,200 block RAM bits support acquisition buffers, while 33,280 logic cells provide parallel datapath resources and 250 user I/O connect instruments, controls, and displays. The L1 grade may reduce power when the instrument performs intermittent measurements, but thermal analysis must include FPGA activity and adjacent circuitry. Use short, controlled impedance routing for acquisition signals, provide solid return paths beneath high-speed interfaces, and follow the manufacturer’s guidance for clocking, decoupling, and configuration pins.
推薦
Motor Control and Power Systems
The XC7A35T-L1FGG484I fits embedded motor-control and power-system logic requiring parallel computation, precise sequencing, and numerous digital connections. The device can coordinate control loops, fault handling, and supervisory logic using its 33,280 logic cells, while 250 user I/O connect position sensors, gate-control signals, and status interfaces. Its -40 °C to +100 °C industrial junction range supports appropriately designed industrial equipment. Keep FPGA switching activity and sensitive timing paths separated from high-current switching nodes, validate every I/O voltage domain against the selected bank power, and include decoupling and thermal analysis in the power-converter layout.
推薦
Embedded Signal Processing
The XC7A35T-L1FGG484I supports parallel filtering, correlation, modulation, and digital front-end functions where flexible datapaths are advantageous. Its 33,280 logic cells provide programmable logic capacity, 1,843,200 block RAM bits support deeper data storage, and 250 user I/O connect converters, samplers, and control logic. The L1 grade is useful when low-power operation is important, although actual consumption must be calculated from utilization, activity, clocking, and I/O loading. Establish timing constraints for every clock domain, use supported clocking resources, and reserve FPGA configuration access so the bitstream can be loaded and monitored reliably in the finished system.
推薦
推薦產品摘要
工程參考資料,適用於 XC7A35T-L1FGG484I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A35T-1FGG484I | XC7A35T-1FGG484C | XC7A35T-1FGG484E | XC7A35T-2FGG484I | XC7A35T-3FGG484I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | FBGA-484 (FGG484) | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same |
| Series | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| Block RAM | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits |
| User I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O |
| Speed Grade | -1 | -1 | -1 | -1 | -2 | -3 |
| Temperature Designation | I industrial temperature | I industrial temperature | C commercial temperature | E extended temperature | I industrial temperature | I industrial temperature |
主要差異化特點
- Low-power Artix-7 operating option (對比XC7A35T-1FGG484I)
- Maintains the established 35T resource configuration (對比XC7A35T-2FGG484I)
- Industrial-temperature option in the same footprint (對比XC7A35T-1FGG484C)
- PCB reuse within the Artix-7 35T family (對比XC7A35T-3FGG484I)
設計說明
Assign the FGG484 footprint from the manufacturer package pinout files rather than from a generic BGA drawing. Start with the exact 484-ball land pattern, verify all power, ground, configuration, clock, and user-I/O assignments, and cross-check the PCB library against the package file before fabrication. A single incorrect high-voltage bank or configuration connection can prevent startup or damage adjacent circuitry even when the logical design is correct.
Plan each supply rail around the required core and I/O voltages, the selected bank configuration, and the device’s permitted operating limits. Place the required bypass capacitors directly at the corresponding balls, provide a low-impedance return path, and distribute high-current connections across multiple balls as specified by the package documentation. Estimate total rail power from the actual design utilization and activity rather than relying on a single nominal device figure.
Assign high-speed interfaces to banks with valid clocking resources and supported I/O standards, then apply device-specific timing constraints to every external interface. Keep clocks away from high-current switching nodes, minimize stubs and unnecessary vias, and provide continuous reference-plane returns. Validate the final routing against the manufacturer’s Artix-7 package and design guidance, including any bank-power and clocking relationships required by the selected speed grade.
Do not treat every XC7A35T suffix combination as electrically interchangeable. The L1, -1, and I identifiers affect power behavior, performance, and temperature capability, while the FGG484 suffix determines the PCB footprint. When changing devices, regenerate the tool target, review the device settings and constraints, confirm that the bitstream supports the new part, and repeat timing and power sign-off rather than reusing results from the original configuration.
合規資訊
The manufacturer’s Artix-7 package pinout resource is identified, but no explicit product-level RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact MPN.