XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD
N.º de pieza: XC7Z020-2CLG400E ✓ ActivoXC7Z020-2CLG400E Descripción general
A Zynq SoC is an FPGA and microprocessor integrated into one semiconductor package. Its hierarchy spans system-on-chip, programmable logic device, FPGA, and embedded processor platform. This integration allows software-controlled algorithms, interfaces, and control logic to operate within one device, reducing component count and simplifying data exchange between the processor and programmable fabric.
Principal features include dual ARM Cortex-A9 MPCore processing, 85K FPGA logic cells, CoreSight debugging, and operation in the CLG400 CSPBGA package. The integrated processor runs at up to 766 MHz, while the Artix-7 fabric supports parallel logic, digital signal processing, and programmable I/O. These resources suit industrial control, communications, image processing, embedded vision, and test systems that need both deterministic hardware logic and a conventional operating system.
The architecture separates software tasks from programmable hardware. ARM software handles networking, control, and an operating environment, while FPGA logic accelerates data acquisition, filtering, protocol handling, or other timing-sensitive workloads. Direct communication between the processor and programmable logic avoids external FPGA-to-SoC interfaces while allowing parallel data paths to be implemented efficiently.
Typical deployments include camera-based inspection, industrial gateways, networked sensor controllers, programmable automation equipment, and embedded communications platforms. The 400-ball package supports dense board layouts but requires careful escape routing, multilayer PCB construction, and controlled power and ground distribution. Designers should follow the AMD package pinout files and Zynq-7000 power guidance when defining ball assignments and layer transitions.
The primary design trade-off is integration against package complexity. A Zynq SoC can replace a separate processor and FPGA while consolidating control and accelerated logic, but the CLG400 BGA footprint demands careful fanout, via planning, signal-integrity control, and assembly process control. A power design that satisfies processor, FPGA, I/O, and auxiliary supply requirements is equally essential.
This product record combines the manufacturer data-sheet identity, exact package and processor characteristics, sourcing information, same-footprint alternatives, and practical PCB guidance. It also distinguishes speed- and temperature-grade variants so engineers can assess replacement suitability without assuming that a similar suffix guarantees equivalent production requirements.
Alternativas directas para XC7Z020-2CLG400E — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC7Z020-2CLG400E (mismo factor de forma y huella) — difiere en Device Type, Performance Grade, Package Dimensions, Package Type, FPGA Logic Cells.
XC7Z020-2CLG400I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z020-3CLG400E
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z020-1CLG400I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z020-1CLG400C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z020-2CLG400C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7Z020-2CLG400E Valores máximos y características eléctricas
| Device Type | Zynq-7000 SoC with Artix-7 FPGA |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 766 MHz |
| FPGA Logic Cells | 85K cells |
| FPGA Family | Artix-7 |
| Debug Capability | CoreSight |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 x 17 mm |
| Ball Count | 400 balls |
| Speed Grade | -2 grade |
| Estado RoHS | Compliant |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de XC7Z020-2CLG400E 17 x 17 mm
Configuración de pines para XC7Z020-2CLG400E (encapsulado 17 x 17 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC7Z020-2CLG400E.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC7Z020-2CLG400E es adecuado para 6 aplicacións: Industrial Machine Vision, Embedded Communications Gateway, Programmable Automation Controller, Industrial Sensor Hub, Data Acquisition System, Secure Network Appliance.
Industrial Machine Vision
The AMD XC7Z020-2CLG400E fits machine-vision controllers that divide image processing between the dual Cortex-A9 processor and the 85K-cell Artix-7 fabric. Linux-based software can coordinate cameras, networking, and user interfaces, while programmable logic can implement pixel capture, preprocessing, and deterministic data transfer. The 766 MHz processor supports general control tasks, and the CLG400 package integrates both functions without an external processor-to-FPGA interface. Designers should use the AMD package files to route the 400-ball footprint and budget the power and thermal requirements of simultaneous processor and logic activity.
Recomendado
Embedded Communications Gateway
The XC7Z020-2CLG400E is suitable for gateways that combine protocol handling and operating-system services with hardware-accelerated packet processing. The dual ARM Cortex-A9 MPCore configuration can run networking software and control services, while the 85K FPGA logic cells can implement parallel interfaces, framing, filtering, or data movement. Its 766 MHz maximum processor frequency supports responsive control tasks, and the integrated architecture reduces external bus traffic. For production gateway designs, route sensitive interfaces according to the official CLG400 pinout and validate power sequencing, thermal performance, and high-speed signal integrity.
Recomendado
Programmable Automation Controller
The AMD XC7Z020-2CLG400E supports programmable automation systems requiring deterministic I/O logic alongside a capable embedded processor. Control software can execute motion, sequencing, diagnostics, and communications functions on the dual Cortex-A9 cores, while the Artix-7 fabric handles parallel sensor acquisition, timing, or actuator multiplexing. The 85K logic-cell count makes the device suitable for moderate custom-logic workloads, and the 766 MHz processor supports real-time operating-system tasks. The 17 x 17 mm CSPBGA package conserves board area but demands multilayer escape routing and carefully planned power delivery.
Recomendado
Industrial Sensor Hub
The XC7Z020-2CLG400E can consolidate sensor acquisition, local processing, and network management in a single programmable SoC. The Artix-7 fabric can acquire or condition parallel sensor data, while the dual Cortex-A9 processor runs device management, diagnostics, and communications software. Its maximum 766 MHz operating frequency provides ample headroom for protocol processing and control logic. Using the integrated processor and FPGA also reduces external component count. Designers should allocate the CLG400 package's power and ground balls according to AMD guidance and validate every high-speed interface against the selected FPGA timing grade.
Recomendado
Data Acquisition System
The XC7Z020-2CLG400E is appropriate for compact data-acquisition equipment that requires flexible sampling logic and embedded processing. Programmable fabric can implement counters, capture pipelines, trigger logic, and data formatting, while the dual ARM Cortex-A9 MPCore subsystem handles configuration, analysis, storage management, and host communication. The 85K-cell Artix-7 fabric provides parallel processing capacity without requiring a separate FPGA. Its 766 MHz processor supports responsive acquisition control, while CoreSight assists debugging of processor-side software. The 400-CSPBGA layout should be paired with a multilayer PCB and manufacturing process capable of handling its fine-pitch ball grid.
Recomendado
Secure Network Appliance
The AMD XC7Z020-2CLG400E can serve as the processing core of a compact network appliance where Linux control functions and hardware-assisted traffic handling are both required. The ARM subsystem manages applications, management interfaces, and protocol services, while the 85K-cell FPGA fabric accelerates filtering, encryption interfaces, or packet buffering. CoreSight supports processor debug during development and validation. The 766 MHz processor and integrated programmable logic offer a compact implementation, but designers must evaluate worst-case power dissipation, memory topology, I/O routing, and thermal margins under sustained network traffic.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC7Z020-2CLG400E — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC7Z020-2CLG400I | XC7Z020-3CLG400E | XC7Z020-1CLG400I | XC7Z020-1CLG400C | XC7Z020-2CLG400C |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (CLG400), 17 x 17 mm | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Family | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| FPGA Logic Cells | 85K cells | 85K cells | 85K cells | 85K cells | 85K cells | 85K cells |
| Speed Grade | -2 | -2 | -3 | -1 | -1 | -2 |
| Temperature-Grade Suffix | E | I | E | I | C | C |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Debug Capability | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Diferenciadores clave
- Matched -2 speed grade with an industrial-temperature family option (frente a XC7Z020-2CLG400I)
- Higher speed-grade option without changing the CLG400 footprint (frente a XC7Z020-3CLG400E)
- Lower-speed family option for designs with reduced timing requirements (frente a XC7Z020-1CLG400I)
- Extended-temperature E-grade configuration (frente a XC7Z020-2CLG400C)
Notas de diseño
Base the land pattern and ball assignments on AMD's official CLG400 package files rather than distributor pinout drawings. The XC7Z020-2CLG400E uses a 400-CSPBGA package on a 17 x 17 mm footprint, so fine-pitch escape routing, via-in-pad strategy, solder-mask design, and assembly tolerance must be coordinated with the PCB fabricator. Preserve access to all power, ground, configuration, clock, and debug balls in the mechanical layout.
Partition the power network according to the requirements in the AMD Zynq-7000 data sheet and device power guidance. The processor subsystem and Artix-7 fabric can have different load dynamics, so use the recommended decoupling values and power topology rather than treating every supply ball as one unrestricted rail. Validate steady-state and transient loading, startup sequencing, voltage tolerance, and the power budget for the selected -2 speed grade and application utilization.
Estimate worst-case junction temperature from total processor, FPGA, I/O, and auxiliary power using the package thermal model and actual PCB construction. Dense multilayer boards may outperform small test coupons, but copper planes, thermal vias, enclosure airflow, and neighboring heat sources still determine the final result. Validate with temperature probes and representative workloads because a design that is adequate for logic-only activity may not tolerate sustained maximum processor activity.
Route high-speed memory and interface signals with continuous reference planes, appropriate length matching, and the topology required by the selected device configuration. Account for the CLG400 escape-routing constraints early in board planning because changes to layer count or ball escape strategy can affect placement of the processor, DDR memory, transceivers, and clock circuitry. Perform post-layout signal-integrity analysis using the actual stack-up and verified device timing.
Do not treat CLG400 and CLG484 Zynq devices as interchangeable footprints. XC7Z020-2CLG484I has a different 484-ball package and cannot replace the target without PCB redesign. Also verify that an alternative preserves the required -1, -2, or -3 speed grade, operating-temperature range, production qualification, and supported configuration. A shared ball-grid family designation alone is not sufficient engineering evidence.
Información de cumplimiento
The exact XC7Z020-2CLG400E listing is identified as RoHS compliant. Other environmental, substance, and automotive qualification attributes are not established for this ordering code.