XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD
MPN: XC7Z020-2CLG400E ✓ 啟用中XC7Z020-2CLG400E 概覽
A Zynq SoC is an FPGA and microprocessor integrated into one semiconductor package. Its hierarchy spans system-on-chip, programmable logic device, FPGA, and embedded processor platform. This integration allows software-controlled algorithms, interfaces, and control logic to operate within one device, reducing component count and simplifying data exchange between the processor and programmable fabric.
Principal features include dual ARM Cortex-A9 MPCore processing, 85K FPGA logic cells, CoreSight debugging, and operation in the CLG400 CSPBGA package. The integrated processor runs at up to 766 MHz, while the Artix-7 fabric supports parallel logic, digital signal processing, and programmable I/O. These resources suit industrial control, communications, image processing, embedded vision, and test systems that need both deterministic hardware logic and a conventional operating system.
The architecture separates software tasks from programmable hardware. ARM software handles networking, control, and an operating environment, while FPGA logic accelerates data acquisition, filtering, protocol handling, or other timing-sensitive workloads. Direct communication between the processor and programmable logic avoids external FPGA-to-SoC interfaces while allowing parallel data paths to be implemented efficiently.
Typical deployments include camera-based inspection, industrial gateways, networked sensor controllers, programmable automation equipment, and embedded communications platforms. The 400-ball package supports dense board layouts but requires careful escape routing, multilayer PCB construction, and controlled power and ground distribution. Designers should follow the AMD package pinout files and Zynq-7000 power guidance when defining ball assignments and layer transitions.
The primary design trade-off is integration against package complexity. A Zynq SoC can replace a separate processor and FPGA while consolidating control and accelerated logic, but the CLG400 BGA footprint demands careful fanout, via planning, signal-integrity control, and assembly process control. A power design that satisfies processor, FPGA, I/O, and auxiliary supply requirements is equally essential.
This product record combines the manufacturer data-sheet identity, exact package and processor characteristics, sourcing information, same-footprint alternatives, and practical PCB guidance. It also distinguishes speed- and temperature-grade variants so engineers can assess replacement suitability without assuming that a similar suffix guarantees equivalent production requirements.
直接替換替代品,適用於 XC7Z020-2CLG400E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7Z020-2CLG400E (相同外形與佔位) — 差異在於 Device Type, Performance Grade, Package Dimensions, Package Type, FPGA Logic Cells.
XC7Z020-2CLG400I
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-3CLG400E
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-1CLG400I
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-1CLG400C
✅ 直接替換聯絡詢價
查看資料表 →XC7Z020-2CLG400C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7Z020-2CLG400E 最大額定值與電氣特性
| Device Type | Zynq-7000 SoC with Artix-7 FPGA |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 766 MHz |
| FPGA Logic Cells | 85K cells |
| FPGA Family | Artix-7 |
| Debug Capability | CoreSight |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 x 17 mm |
| Ball Count | 400 balls |
| Speed Grade | -2 grade |
| RoHS 狀態 | Compliant |
| 安裝類型 | Surface mount |
XC7Z020-2CLG400E 17 x 17 mm 腳位配置指南
XC7Z020-2CLG400E(17 x 17 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7Z020-2CLG400E.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7Z020-2CLG400E 適用於 6 應用s: Industrial Machine Vision, Embedded Communications Gateway, Programmable Automation Controller, Industrial Sensor Hub, Data Acquisition System, Secure Network Appliance.
Industrial Machine Vision
The AMD XC7Z020-2CLG400E fits machine-vision controllers that divide image processing between the dual Cortex-A9 processor and the 85K-cell Artix-7 fabric. Linux-based software can coordinate cameras, networking, and user interfaces, while programmable logic can implement pixel capture, preprocessing, and deterministic data transfer. The 766 MHz processor supports general control tasks, and the CLG400 package integrates both functions without an external processor-to-FPGA interface. Designers should use the AMD package files to route the 400-ball footprint and budget the power and thermal requirements of simultaneous processor and logic activity.
推薦
Embedded Communications Gateway
The XC7Z020-2CLG400E is suitable for gateways that combine protocol handling and operating-system services with hardware-accelerated packet processing. The dual ARM Cortex-A9 MPCore configuration can run networking software and control services, while the 85K FPGA logic cells can implement parallel interfaces, framing, filtering, or data movement. Its 766 MHz maximum processor frequency supports responsive control tasks, and the integrated architecture reduces external bus traffic. For production gateway designs, route sensitive interfaces according to the official CLG400 pinout and validate power sequencing, thermal performance, and high-speed signal integrity.
推薦
Programmable Automation Controller
The AMD XC7Z020-2CLG400E supports programmable automation systems requiring deterministic I/O logic alongside a capable embedded processor. Control software can execute motion, sequencing, diagnostics, and communications functions on the dual Cortex-A9 cores, while the Artix-7 fabric handles parallel sensor acquisition, timing, or actuator multiplexing. The 85K logic-cell count makes the device suitable for moderate custom-logic workloads, and the 766 MHz processor supports real-time operating-system tasks. The 17 x 17 mm CSPBGA package conserves board area but demands multilayer escape routing and carefully planned power delivery.
推薦
Industrial Sensor Hub
The XC7Z020-2CLG400E can consolidate sensor acquisition, local processing, and network management in a single programmable SoC. The Artix-7 fabric can acquire or condition parallel sensor data, while the dual Cortex-A9 processor runs device management, diagnostics, and communications software. Its maximum 766 MHz operating frequency provides ample headroom for protocol processing and control logic. Using the integrated processor and FPGA also reduces external component count. Designers should allocate the CLG400 package's power and ground balls according to AMD guidance and validate every high-speed interface against the selected FPGA timing grade.
推薦
Data Acquisition System
The XC7Z020-2CLG400E is appropriate for compact data-acquisition equipment that requires flexible sampling logic and embedded processing. Programmable fabric can implement counters, capture pipelines, trigger logic, and data formatting, while the dual ARM Cortex-A9 MPCore subsystem handles configuration, analysis, storage management, and host communication. The 85K-cell Artix-7 fabric provides parallel processing capacity without requiring a separate FPGA. Its 766 MHz processor supports responsive acquisition control, while CoreSight assists debugging of processor-side software. The 400-CSPBGA layout should be paired with a multilayer PCB and manufacturing process capable of handling its fine-pitch ball grid.
推薦
Secure Network Appliance
The AMD XC7Z020-2CLG400E can serve as the processing core of a compact network appliance where Linux control functions and hardware-assisted traffic handling are both required. The ARM subsystem manages applications, management interfaces, and protocol services, while the 85K-cell FPGA fabric accelerates filtering, encryption interfaces, or packet buffering. CoreSight supports processor debug during development and validation. The 766 MHz processor and integrated programmable logic offer a compact implementation, but designers must evaluate worst-case power dissipation, memory topology, I/O routing, and thermal margins under sustained network traffic.
推薦
推薦產品摘要
工程參考資料,適用於 XC7Z020-2CLG400E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7Z020-2CLG400I | XC7Z020-3CLG400E | XC7Z020-1CLG400I | XC7Z020-1CLG400C | XC7Z020-2CLG400C |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (CLG400), 17 x 17 mm | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same | 400-CSPBGA (CLG400), same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Family | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 | Zynq-7000 / XC7Z020 |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| FPGA Logic Cells | 85K cells | 85K cells | 85K cells | 85K cells | 85K cells | 85K cells |
| Speed Grade | -2 | -2 | -3 | -1 | -1 | -2 |
| Temperature-Grade Suffix | E | I | E | I | C | C |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Debug Capability | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
主要差異化特點
- Matched -2 speed grade with an industrial-temperature family option (對比XC7Z020-2CLG400I)
- Higher speed-grade option without changing the CLG400 footprint (對比XC7Z020-3CLG400E)
- Lower-speed family option for designs with reduced timing requirements (對比XC7Z020-1CLG400I)
- Extended-temperature E-grade configuration (對比XC7Z020-2CLG400C)
設計說明
Base the land pattern and ball assignments on AMD's official CLG400 package files rather than distributor pinout drawings. The XC7Z020-2CLG400E uses a 400-CSPBGA package on a 17 x 17 mm footprint, so fine-pitch escape routing, via-in-pad strategy, solder-mask design, and assembly tolerance must be coordinated with the PCB fabricator. Preserve access to all power, ground, configuration, clock, and debug balls in the mechanical layout.
Partition the power network according to the requirements in the AMD Zynq-7000 data sheet and device power guidance. The processor subsystem and Artix-7 fabric can have different load dynamics, so use the recommended decoupling values and power topology rather than treating every supply ball as one unrestricted rail. Validate steady-state and transient loading, startup sequencing, voltage tolerance, and the power budget for the selected -2 speed grade and application utilization.
Estimate worst-case junction temperature from total processor, FPGA, I/O, and auxiliary power using the package thermal model and actual PCB construction. Dense multilayer boards may outperform small test coupons, but copper planes, thermal vias, enclosure airflow, and neighboring heat sources still determine the final result. Validate with temperature probes and representative workloads because a design that is adequate for logic-only activity may not tolerate sustained maximum processor activity.
Route high-speed memory and interface signals with continuous reference planes, appropriate length matching, and the topology required by the selected device configuration. Account for the CLG400 escape-routing constraints early in board planning because changes to layer count or ball escape strategy can affect placement of the processor, DDR memory, transceivers, and clock circuitry. Perform post-layout signal-integrity analysis using the actual stack-up and verified device timing.
Do not treat CLG400 and CLG484 Zynq devices as interchangeable footprints. XC7Z020-2CLG484I has a different 484-ball package and cannot replace the target without PCB redesign. Also verify that an alternative preserves the required -1, -2, or -3 speed grade, operating-temperature range, production qualification, and supported configuration. A shared ball-grid family designation alone is not sufficient engineering evidence.
合規資訊
The exact XC7Z020-2CLG400E listing is identified as RoHS compliant. Other environmental, substance, and automotive qualification attributes are not established for this ordering code.