AMD

XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD

N.º da peça: XC7Z020-2CLG400E ✓ Ativo
400-CSPBGA Package 766 MHz Speed
MOQ: 1 |

XC7Z020-2CLG400E Visão geral

The AMD XC7Z020-2CLG400E is a Zynq-7000 programmable system-on-chip combining a dual-core ARM Cortex-A9 processor with an Artix-7 FPGA, 85K logic cells, and a maximum processor frequency of 766 MHz in a 400-CSPBGA package measuring 17 x 17 mm. The device integrates programmable logic with a hard processor subsystem and CoreSight debug capabilities for Linux-based embedded systems.

A Zynq SoC is an FPGA and microprocessor integrated into one semiconductor package. Its hierarchy spans system-on-chip, programmable logic device, FPGA, and embedded processor platform. This integration allows software-controlled algorithms, interfaces, and control logic to operate within one device, reducing component count and simplifying data exchange between the processor and programmable fabric.

Principal features include dual ARM Cortex-A9 MPCore processing, 85K FPGA logic cells, CoreSight debugging, and operation in the CLG400 CSPBGA package. The integrated processor runs at up to 766 MHz, while the Artix-7 fabric supports parallel logic, digital signal processing, and programmable I/O. These resources suit industrial control, communications, image processing, embedded vision, and test systems that need both deterministic hardware logic and a conventional operating system.

The architecture separates software tasks from programmable hardware. ARM software handles networking, control, and an operating environment, while FPGA logic accelerates data acquisition, filtering, protocol handling, or other timing-sensitive workloads. Direct communication between the processor and programmable logic avoids external FPGA-to-SoC interfaces while allowing parallel data paths to be implemented efficiently.

Typical deployments include camera-based inspection, industrial gateways, networked sensor controllers, programmable automation equipment, and embedded communications platforms. The 400-ball package supports dense board layouts but requires careful escape routing, multilayer PCB construction, and controlled power and ground distribution. Designers should follow the AMD package pinout files and Zynq-7000 power guidance when defining ball assignments and layer transitions.

The primary design trade-off is integration against package complexity. A Zynq SoC can replace a separate processor and FPGA while consolidating control and accelerated logic, but the CLG400 BGA footprint demands careful fanout, via planning, signal-integrity control, and assembly process control. A power design that satisfies processor, FPGA, I/O, and auxiliary supply requirements is equally essential.

This product record combines the manufacturer data-sheet identity, exact package and processor characteristics, sourcing information, same-footprint alternatives, and practical PCB guidance. It also distinguishes speed- and temperature-grade variants so engineers can assess replacement suitability without assuming that a similar suffix guarantees equivalent production requirements.

Alternativas drop-in para XC7Z020-2CLG400E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC7Z020-2CLG400E (mesmo formato e footprint) — diferindo em Device Type, Performance Grade, Package Dimensions, Package Type, FPGA Logic Cells.

AMD
Device Type: Zynq-7000 ARM Cortex-A9 and Artix-7 FPGA system-on-chip
Performance Grade: -1 speed grade
Package Dimensions: 17 mm x 17 mm
Comparar com XC7Z020-2CLG400E →
AMD
Device Type: Zynq-7000 Artix-7 FPGA system on chip
Performance Grade: -2
Package Dimensions: 17 mm x 17 mm
Comparar com XC7Z020-2CLG400E →
AMD
Device Type: Zynq-7000 adaptive system-on-chip with Arm Cortex-A9 processor and Artix-7 FPGA
Performance Grade: -3 speed grade
Package Type: 400-pin CS-BGA
Comparar com XC7Z020-2CLG400E →

XC7Z020-2CLG400I

✅ Drop-In
AMD
📦 400-CSPBGA (CLG400)
Zynq-7000 Artix-7 FPGA system on chip · Dual ARM Cortex-A9 MPCore · 766 MHz · 85K logic cells · CoreSight · Artix-7 · Zynq-7000 · Zynq-7000 SoC with ARM Cortex-A9 MPCore and programmable FPGA logic

Consulte o preço

Ver ficha técnica →

XC7Z020-3CLG400E

✅ Drop-In
AMD
📦 400-CSPBGA (CLG400)
Zynq-7000 adaptive system-on-chip with Arm Cortex-A9 processor and Artix-7 FPGA · 2 Arm Cortex-A9 MPCore cores · 866 MHz · 32-bit Thumb-2 · 85K logic cells · Artix-7 · CoreSight · Zynq-7000 adaptive SoC

Consulte o preço

Ver ficha técnica →

XC7Z020-1CLG400I

✅ Drop-In
AMD
📦 400-CSPBGA (CLG400)
Zynq-7000 system-on-chip with Artix-7 FPGA logic · Dual Arm Cortex-A9 MPCore · 667 MHz · 85K logic cells · CoreSight · 400-CSPBGA · 17 x 17 mm · 400 pins

Consulte o preço

Ver ficha técnica →

XC7Z020-1CLG400C

✅ Drop-In
AMD
📦 400-CSPBGA (CLG400)
Zynq-7000 ARM Cortex-A9 and Artix-7 FPGA system-on-chip · Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 85K logic cells · Artix-7 · 400-CSPBGA · 17 mm x 17 mm · 400 balls

Consulte o preço

Ver ficha técnica →

XC7Z020-2CLG400C

✅ Drop-In ⚠️ Especificações não verificadas
📦 400-CSPBGA (CLG400)
Temperature-grade suffix changes from E to C while the -2 speed grade and CLG400 footprint remain unchanged.

📋 Alternativa de referência (fora do catálogo)

XC7Z020-2CLG400E Classificações máximas e características elétricas

Device Type Zynq-7000 SoC with Artix-7 FPGA
Processor Core Dual ARM Cortex-A9 MPCore
Maximum Processor Frequency 766 MHz
FPGA Logic Cells 85K cells
FPGA Family Artix-7
Debug Capability CoreSight
Package Type 400-CSPBGA
Package Dimensions 17 x 17 mm
Ball Count 400 balls
Speed Grade -2 grade
Status RoHS Compliant
Tipo de montagem Surface mount

Guia de Configuração de Pinos do XC7Z020-2CLG400E 17 x 17 mm

Configuração de pinos para XC7Z020-2CLG400E (pacote 17 x 17 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 17 x 17 mm para XC7Z020-2CLG400E

Nenhum dado detalhado de pinagem disponível para XC7Z020-2CLG400E.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC7Z020-2CLG400E é adequado para 6 aplicaçãos: Industrial Machine Vision, Embedded Communications Gateway, Programmable Automation Controller, Industrial Sensor Hub, Data Acquisition System, Secure Network Appliance.

🏭

Industrial Machine Vision

The AMD XC7Z020-2CLG400E fits machine-vision controllers that divide image processing between the dual Cortex-A9 processor and the 85K-cell Artix-7 fabric. Linux-based software can coordinate cameras, networking, and user interfaces, while programmable logic can implement pixel capture, preprocessing, and deterministic data transfer. The 766 MHz processor supports general control tasks, and the CLG400 package integrates both functions without an external processor-to-FPGA interface. Designers should use the AMD package files to route the 400-ball footprint and budget the power and thermal requirements of simultaneous processor and logic activity.

🌐

Embedded Communications Gateway

The XC7Z020-2CLG400E is suitable for gateways that combine protocol handling and operating-system services with hardware-accelerated packet processing. The dual ARM Cortex-A9 MPCore configuration can run networking software and control services, while the 85K FPGA logic cells can implement parallel interfaces, framing, filtering, or data movement. Its 766 MHz maximum processor frequency supports responsive control tasks, and the integrated architecture reduces external bus traffic. For production gateway designs, route sensitive interfaces according to the official CLG400 pinout and validate power sequencing, thermal performance, and high-speed signal integrity.

🤖

Programmable Automation Controller

The AMD XC7Z020-2CLG400E supports programmable automation systems requiring deterministic I/O logic alongside a capable embedded processor. Control software can execute motion, sequencing, diagnostics, and communications functions on the dual Cortex-A9 cores, while the Artix-7 fabric handles parallel sensor acquisition, timing, or actuator multiplexing. The 85K logic-cell count makes the device suitable for moderate custom-logic workloads, and the 766 MHz processor supports real-time operating-system tasks. The 17 x 17 mm CSPBGA package conserves board area but demands multilayer escape routing and carefully planned power delivery.

🧩

Industrial Sensor Hub

The XC7Z020-2CLG400E can consolidate sensor acquisition, local processing, and network management in a single programmable SoC. The Artix-7 fabric can acquire or condition parallel sensor data, while the dual Cortex-A9 processor runs device management, diagnostics, and communications software. Its maximum 766 MHz operating frequency provides ample headroom for protocol processing and control logic. Using the integrated processor and FPGA also reduces external component count. Designers should allocate the CLG400 package's power and ground balls according to AMD guidance and validate every high-speed interface against the selected FPGA timing grade.

📟

Data Acquisition System

The XC7Z020-2CLG400E is appropriate for compact data-acquisition equipment that requires flexible sampling logic and embedded processing. Programmable fabric can implement counters, capture pipelines, trigger logic, and data formatting, while the dual ARM Cortex-A9 MPCore subsystem handles configuration, analysis, storage management, and host communication. The 85K-cell Artix-7 fabric provides parallel processing capacity without requiring a separate FPGA. Its 766 MHz processor supports responsive acquisition control, while CoreSight assists debugging of processor-side software. The 400-CSPBGA layout should be paired with a multilayer PCB and manufacturing process capable of handling its fine-pitch ball grid.

🔒

Secure Network Appliance

The AMD XC7Z020-2CLG400E can serve as the processing core of a compact network appliance where Linux control functions and hardware-assisted traffic handling are both required. The ARM subsystem manages applications, management interfaces, and protocol services, while the 85K-cell FPGA fabric accelerates filtering, encryption interfaces, or packet buffering. CoreSight supports processor debug during development and validation. The 766 MHz processor and integrated programmable logic offer a compact implementation, but designers must evaluate worst-case power dissipation, memory topology, I/O routing, and thermal margins under sustained network traffic.

What are the key specifications of XC7Z020-2CLG400E that engineers should know?
The XC7Z020-2CLG400E integrates a dual-core ARM Cortex-A9 MPCore processor, 85K Artix-7 FPGA logic cells, CoreSight debugging, and a maximum processor frequency of 766 MHz in a 400-CSPBGA package. According to the AMD Zynq-7000 data sheet, the device belongs to the XC7Z020 family and combines an embedded processor with programmable logic. Its 17 x 17 mm CSPBGA package also requires multilayer PCB routing, controlled power delivery, and assembly process management.
Where can I download the XC7Z020-2CLG400E datasheet PDF?
The XC7Z020-2CLG400E data sheet is available from the official AMD document service at https://docs.amd.com/v/u/en-US/ds187-XC7Z010-XC7Z020-Data-Sheet. The AMD document covers the XC7Z010 and XC7Z020 families, including DC and AC switching characteristics for applicable Zynq-7000 devices. Use the manufacturer document for authoritative electrical limits, timing, power, package, and pin information rather than relying on distributor summaries.
Where can I find the XC7Z020 CLG400 pinout?
The XC7Z020 CLG400 pinout is available through AMD's official Zynq-7000 package device pinout files at https://www.amd.com/en/developer/resources/adaptive-socs-and-fpgas/package-pinout-files/zynq-7000-package-device-pinout-files.html. According to that resource, the downloadable package files include ASCII pinout data in TXT format and CSV format, with the file format described in UG865. Use these files for PCB land patterns and ball assignments.
Can XC7Z020-2CLG400I replace XC7Z020-2CLG400E?
The XC7Z020-2CLG400I can be a pin-compatible alternative when its temperature grade satisfies the production environment. Both parts use the CLG400 package and the -2 speed designation, while the principal ordering-code distinction is the final temperature-grade letter. According to AMD family naming information, the I suffix identifies the industrial temperature option, whereas the E suffix identifies the extended-temperature option.
What can replace XC7Z020-2CLG400E?
A drop-in replacement must retain the XC7Z020 device, CLG400 package, and a compatible -1, -2, or -3 speed grade. XC7Z020-2CLG400I is the closest temperature-grade alternative, while XC7Z020-1CLG400I and XC7Z020-1CLG400C provide lower speed-grade options. XC7Z020-3CLG400E provides a higher speed-grade option. Confirm the required temperature range, processor frequency, FPGA timing, and production qualification before substitution.
Is XC7Z020-2CLG400E suitable for an industrial embedded control system?
The XC7Z020-2CLG400E is suitable when its exact temperature grade matches the system's environmental requirements. Its dual Cortex-A9 processor supports an operating system and control software, while the 85K-cell Artix-7 fabric handles parallel logic and time-critical functions. For installations with severe temperature exposure, verify the E-grade operating limits or select the industrial-temperature XC7Z020-2CLG400I after completing a complete operating-temperature comparison.
What is the difference between XC7Z020-2CLG400E and XC7Z020-1CLG400C?
The XC7Z020-2CLG400E and XC7Z020-1CLG400C both use the 400-CSPBGA CLG400 package and belong to the XC7Z020 family, but their ordering-code suffixes indicate different speed grades. The -2 designation is one speed-grade position above -1. According to the AMD Zynq-7000 data-sheet family coverage, both devices are supported Zynq-7000 SoC options, with the exact operating limits governed by their individual grade definitions.
XC7Z020-2CLG400E vs XC7Z020-3CLG400E: which speed grade should be selected?
The XC7Z020-3CLG400E is the higher speed-grade option, while the XC7Z020-2CLG400E is the lower speed grade. Both retain the XC7Z020 device identity and CLG400 package, making the footprint suitable for a drop-in consideration. According to AMD's Zynq-7000 data-sheet coverage, XC7Z020 is one supported device family. Final selection should follow the required timing margin and power budget rather than speed grade alone.
Is the XC7Z020-2CLG400E the same as XC7Z020-2CLG484I?
No. The XC7Z020-2CLG400E uses the 400-CSPBGA CLG400 package, whereas the XC7Z020-2CLG484I uses the 484-ball CLG484 package. Although both can provide the XC7Z020 processor and FPGA resources, the CLG484 footprint has more balls and a different PCB land pattern. The XC7Z020-2CLG484I therefore cannot replace the target without a board redesign and pin-by-pin signal reassignment.
What is the best AMD equivalent for XC7Z020-2CLG400E?
The best AMD equivalent depends on whether speed grade or temperature grade must change. XC7Z020-2CLG400I matches the -2 speed grade and CLG400 footprint, XC7Z020-1CLG400I matches the footprint with a lower speed grade, and XC7Z020-3CLG400E matches the footprint with a higher speed grade. AMD's package pinout files confirm the common CLG400 package family, but qualification and electrical constraints must still be reviewed.
Where can I buy XC7Z020-2CLG400E and check current stock?
Use the Request a Quote form on this page to ask for XC7Z020-2CLG400E pricing, current stock, minimum order quantity, and lead time. The part is identified by distributors as a 400-CSPBGA Zynq-7000 SoC with 85K logic cells and 766 MHz operation. Quote requests are preferable to static stock or price statements because allocation, lead time, and commercial conditions can change.
What is the price of XC7Z020-2CLG400E?
Current commercial pricing for XC7Z020-2CLG400E should be obtained through the Request a Quote form on this page. The available distributor listing identifies the exact MPN and reports a starting amount, but it does not provide the required explicit quantity-break table needed for a fixed tiered price. A quote also allows the exact package, quantity, delivery schedule, and supply status to be confirmed together.
What is the lead time for XC7Z020-2CLG400E?
Request the current XC7Z020-2CLG400E lead time through the Request a Quote form on this page. Lead time can vary with order quantity, allocation, and the requested CLG400 shipping configuration. The exact MPN is listed in stock by at least one distributor, but that listing alone does not guarantee a firm factory lead time for every quantity or delivery date.
Is XC7Z020-2CLG400E in stock?
The XC7Z020-2CLG400E is listed as in stock by a distributor, while distributor purchasing pages also describe immediate order and shipment availability. Because inventory is time-sensitive, use the Request a Quote form on this page to confirm the quantity currently available and the expected dispatch date. The manufacturer identifier, package, and electrical configuration should remain unchanged during that confirmation.
How should a PCB be designed around the XC7Z020-2CLG400E CLG400 package?
Design the PCB around the official AMD CLG400 package pinout and land pattern, using the downloadable Zynq-7000 package files for ball-level assignments. The 400-CSPBGA package measures 17 x 17 mm and generally requires multilayer routing for power, ground, high-speed interfaces, and escape paths. Follow AMD's Zynq-7000 power and PCB guidance for decoupling, plane geometry, via placement, and assembly-process requirements.

Dados de referência de engenharia para XC7Z020-2CLG400E — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the XC7Z020-2CLG400E when the design requires the XC7Z020 dual-Cortex-A9 and 85K-cell Artix-7 combination in the CLG400 package, with the -2 speed grade and E temperature-grade suffix matching the production environment. Select XC7Z020-2CLG400I when the system needs the same speed and package but a different temperature-grade suffix. Consider XC7Z020-1CLG400I or XC7Z020-1CLG400C when lower speed-grade demand is sufficient and the environmental limits are acceptable. XC7Z020-3CLG400E may suit timing-constrained designs that can accommodate a one-grade higher speed designation. Do not use an XC7Z020-2CLG484I as a direct replacement because CLG484 is a different package. For every candidate, verify temperature limits, timing closure, power, software-device support, qualification, and the complete CLG400 pin and land pattern before production release.

Comparação com alternativas

Parâmetro Este produto XC7Z020-2CLG400I XC7Z020-3CLG400E XC7Z020-1CLG400I XC7Z020-1CLG400C XC7Z020-2CLG400C
Package 400-CSPBGA (CLG400), 17 x 17 mm 400-CSPBGA (CLG400), same 400-CSPBGA (CLG400), same 400-CSPBGA (CLG400), same 400-CSPBGA (CLG400), same 400-CSPBGA (CLG400), same
Brand AMD AMD AMD AMD AMD AMD
Product Family Zynq-7000 / XC7Z020 Zynq-7000 / XC7Z020 Zynq-7000 / XC7Z020 Zynq-7000 / XC7Z020 Zynq-7000 / XC7Z020 Zynq-7000 / XC7Z020
Processor Core Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
FPGA Logic Cells 85K cells 85K cells 85K cells 85K cells 85K cells 85K cells
Speed Grade -2 -2 -3 -1 -1 -2
Temperature-Grade Suffix E I E I C C
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Debug Capability CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

Principais diferenciais

  • Matched -2 speed grade with an industrial-temperature family option (vs XC7Z020-2CLG400I)
  • Higher speed-grade option without changing the CLG400 footprint (vs XC7Z020-3CLG400E)
  • Lower-speed family option for designs with reduced timing requirements (vs XC7Z020-1CLG400I)
  • Extended-temperature E-grade configuration (vs XC7Z020-2CLG400C)

Notas de projeto

Base the land pattern and ball assignments on AMD's official CLG400 package files rather than distributor pinout drawings. The XC7Z020-2CLG400E uses a 400-CSPBGA package on a 17 x 17 mm footprint, so fine-pitch escape routing, via-in-pad strategy, solder-mask design, and assembly tolerance must be coordinated with the PCB fabricator. Preserve access to all power, ground, configuration, clock, and debug balls in the mechanical layout.

Partition the power network according to the requirements in the AMD Zynq-7000 data sheet and device power guidance. The processor subsystem and Artix-7 fabric can have different load dynamics, so use the recommended decoupling values and power topology rather than treating every supply ball as one unrestricted rail. Validate steady-state and transient loading, startup sequencing, voltage tolerance, and the power budget for the selected -2 speed grade and application utilization.

Estimate worst-case junction temperature from total processor, FPGA, I/O, and auxiliary power using the package thermal model and actual PCB construction. Dense multilayer boards may outperform small test coupons, but copper planes, thermal vias, enclosure airflow, and neighboring heat sources still determine the final result. Validate with temperature probes and representative workloads because a design that is adequate for logic-only activity may not tolerate sustained maximum processor activity.

Route high-speed memory and interface signals with continuous reference planes, appropriate length matching, and the topology required by the selected device configuration. Account for the CLG400 escape-routing constraints early in board planning because changes to layer count or ball escape strategy can affect placement of the processor, DDR memory, transceivers, and clock circuitry. Perform post-layout signal-integrity analysis using the actual stack-up and verified device timing.

Do not treat CLG400 and CLG484 Zynq devices as interchangeable footprints. XC7Z020-2CLG484I has a different 484-ball package and cannot replace the target without PCB redesign. Also verify that an alternative preserves the required -1, -2, or -3 speed grade, operating-temperature range, production qualification, and supported configuration. A shared ball-grid family designation alone is not sufficient engineering evidence.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact XC7Z020-2CLG400E listing is identified as RoHS compliant. Other environmental, substance, and automotive qualification attributes are not established for this ordering code.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

xc7z020 2clg400e xc7z020 datasheet xc7z020 2clg400i datasheet xc7z020 1clg400i datasheet xc7z020 1clg400c xc7z020 2clg400i xc7z020 1clg400i xc7z020 2clg400e datasheet xc7z020 2clg400e pinout xc7z020 2clg400e footprint xc7z020 2clg400e replacement amd xc7z020 2clg400e xc7z020 2clg400e price xc7z020 2clg400e stock

Componentes & termos relacionados

AMD XC7Z020-2CLG400E XC7Z020-2CLG400I XC7Z020-3CLG400E XC7Z020-1CLG400I XC7Z020-1CLG400C XC7Z020-2CLG400C Zynq-7000 XC7Z020 Artix-7 FPGA ARM Cortex-A9 MPCore system-on-chip programmable logic device embedded processor platform CoreSight RoHS 400-CSPBGA CLG400 BGA surface mount logic cells 766 MHz industrial control machine vision
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ