Zilog

Z86E0812PEC - 8-Bit 12MHz OTP Microcontroller | Zilog

N.º de pieza: Z86E0812PEC ✓ Activo
18-pin PDIP Package 12 MHz Speed One-time-programmable (OTP) Memory
MOQ: 1 |

Z86E0812PEC Descripción general

Zilog Z86E0812PEC is an 8-bit Z8 CMOS OTP microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory organized as 2K x 8. The device is packaged in an 18-pin PDIP format and is identified as an industrial-temperature grade. Its combination of a compact 8-bit architecture, embedded program memory, and a 12 MHz clock makes it suitable for cost-sensitive embedded control systems that require deterministic control logic without an external programmable-memory device.

An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and embedded control peripherals. The Z8 product family targets cost-sensitive, high-volume applications in consumer equipment, automotive products, security equipment, and HVAC systems. In this hierarchy, the Z86E0812PEC is an MCU, embedded microcontroller, Z8-family processor, and CMOS semiconductor optimized for small control products rather than general-purpose computing.

The principal device parameters are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, an 8-bit CPU, and an 18-pin PDIP package. One-time-programmable memory allows the application program to be fixed during manufacturing, which simplifies production for products whose firmware and configuration do not require field updates. The same 12 MHz and 2K x 8 memory configuration shown for the Z86E0812PEC appears in listings for the related Z86E0812PEG device, making that part a relevant footprint-level comparison.

The Z8 CPU architecture provides a compact implementation for embedded control tasks. The device can be evaluated as a general-purpose controller for products needing digital status inputs, actuator outputs, timing functions, and product-specific sequencing. Because the program memory is one-time programmable, firmware becomes part of the product definition at manufacturing, and later changes normally require a new programmed device rather than an in-circuit memory update.

Typical uses include security-system controllers, HVAC control boards, consumer appliances, automotive accessories, and other embedded products with modest logic requirements. The 12 MHz operating rate provides a practical balance between control responsiveness and system simplicity, while the 2 KB OTP capacity favors compact firmware focused on the product's primary state machine and peripheral routines. Package size and through-hole construction may also suit assembled control modules where leaded components are preferred.

Designers should confirm the complete pin assignment, peripheral configuration, clock requirements, reset behavior, and electrical limits in the manufacturer datasheet before layout. Because the device uses OTP memory, production programming and revision control should be coordinated with firmware approval. Confirming the exact package suffix is also important: the available comparison identifies Z86E0812PEG as an 18-DIP replacement candidate with matching main performance characteristics and consistent terminals.

This page combines the verified Z86E0812PEC identity and listing data with a focused drop-in comparison, package information, technical FAQs, and practical selection guidance. It helps engineers distinguish the target device from a close same-family alternative while highlighting the attributes that must still be checked before approving a replacement in production hardware.

Alternativas directas para Z86E0812PEC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con Z86E0812PEC (mismo factor de forma y huella) — difiere en Program Memory Type.

Zilog
Program Memory Type: OTP
Comparar con Z86E0812PEC →

Z86E0812PEG

✅ Sustitución directa
Zilog
📦 18-pin PDIP
8-bit Z8 microcontroller · eZ8 CISC · 12 MHz · OTP · 2 KB (2K x 8) · 4.5 V to 5.5 V · 14 ports · -40°C to +105°C

Consulte el precio

Ver hoja de datos →

Z86E0812PEC Valores máximos y características eléctricas

Product Type 8-bit CMOS OTP microcontroller
Processor Family Z8
CPU Architecture 8-bit
Frecuencia de reloj máxima 12 MHz
Program Memory Type One-time-programmable (OTP)
Program Memory Capacity 2 KB (2K x 8 bits)
Package Type 18-pin PDIP
Recuento de pines 18 pins
Estilo de montaje Through-hole
Temperature Grade Industrial (XTEMP designation)
Technology CMOS
Ancho del bus de datos 8 bits
Program Memory Write Capability One time after programming

Guía de configuración de pines de Z86E0812PEC 18-pin pdip

Configuración de pines para Z86E0812PEC (encapsulado 18-pin pdip). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 18-pin pdip para Z86E0812PEC

No hay datos detallados de patillaje disponibles para Z86E0812PEC.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

Z86E0812PEC es adecuado para 6 aplicacións: HVAC Control Modules, Security-System Controllers, Consumer Appliance Control, Automotive Accessory Modules, Lighting and Relay Sequencers, Embedded Keypads and Access Controls.

🏭

HVAC Control Modules

Z86E0812PEC fits compact HVAC control modules where an 8-bit controller must coordinate sensor inputs, operating modes, indicators, and actuator outputs. Its 12 MHz clock supports responsive state-machine execution without requiring a higher-cost processor, while 2 KB of OTP memory is appropriate for a tightly scoped control program. The 18-pin PDIP format also suits assemblies that use through-hole insertion. Designers should allocate program memory carefully because OTP cannot be rewritten after programming, and they should verify the pin assignments, timer resources, and operating limits in the manufacturer datasheet before finalizing the control board.

🛡️

Security-System Controllers

Z86E0812PEC is appropriate for compact security products that combine input monitoring, alarm states, indicators, access-control functions, and simple communication tasks. The 8-bit Z8 architecture is well matched to a deterministic control flow, and the 12 MHz operating frequency provides ample margin for timed sequences in modest embedded firmware. Zilog identifies security among the target markets for this MCU family. Because the 2 KB program memory is one-time programmable, security-system manufacturers should freeze firmware revisions before programming and use traceable part labeling and end-of-line functional testing.

🏠

Consumer Appliance Control

Z86E0812PEC can serve as the primary controller in a cost-sensitive appliance where a small state machine handles switches, indicators, timers, and a limited set of actuators. Its 8-bit CPU, 12 MHz clock, and 2 KB of OTP memory provide enough capability for compact products without a large embedded ecosystem. One-time programming simplifies lifecycle control for products with stable firmware, although production changes require new programmed devices. The design should minimize external components where practical and should use the datasheet's clock and reset recommendations to prevent intermittent startup or timing failures.

🚗

Automotive Accessory Modules

Z86E0812PEC is a candidate for simple automotive accessory controllers, particularly modules whose functions can be represented by a compact 8-bit firmware image. Zilog lists automotive among the application markets for its MCU portfolio, while this device provides a 12 MHz Z8 CPU and 2 KB of OTP memory. A production design must still confirm operating-temperature coverage, electrical limits, automotive qualification status, transient protection, and lifecycle expectations for the exact suffix. Automotive programs should add the appropriate protection and validation beyond the basic control functions supported by the MCU.

💡

Lighting and Relay Sequencers

Z86E0812PEC can control a lighting panel, relay sequence, or timed actuator subsystem when the design requires deterministic switching rather than a high-level operating system. The 12 MHz clock and 8-bit architecture suit short state-machine routines, event counting, debouncing, and sequencing functions, while the 2 KB OTP limit encourages a compact code footprint. Through-hole packaging may simplify assembly of larger relay-control products. Engineers should check each I/O's electrical limits, add appropriate driver and flyback protection where required, and confirm startup behavior directly from the manufacturer datasheet.

🔐

Embedded Keypads and Access Controls

Z86E0812PEC can serve small access-control or keypad products that scan inputs, manage lock states, update indicators, and implement short timing sequences. Its 8-bit Z8 CPU is efficient for these compact control tasks, and the 12 MHz operating rate supports responsive scanning without a complex processing chain. The 2 KB OTP memory is adequate only when firmware is disciplined around the core access-control function. Before layout, confirm scan timing, debounce requirements, output drive limits, and reset behavior in the manufacturer datasheet; during production, protect the one-time-programmable image with formal change control.

What is Z86E0812PEC?
Z86E0812PEC is a Zilog Z8 CMOS 8-bit microcontroller with a maximum clock frequency of 12 MHz and 2 KB of one-time-programmable memory organized as 2K x 8. According to the manufacturer datasheet listing, it is an 18-pin PDIP device intended for cost-sensitive, high-volume embedded-control products. Its small program memory is suitable for compact firmware rather than complex applications requiring substantial code storage.
What are the key specifications of Z86E0812PEC that engineers should know?
The key Z86E0812PEC specifications are an 8-bit Z8 CPU, 12 MHz maximum operating frequency, 2 KB of OTP program memory, and an 18-pin PDIP package. The manufacturer datasheet listing also identifies the device as CMOS and industrial-grade. Because program memory is one-time programmable, production programming must be coordinated with final firmware approval, while designers should verify pin functions, supply limits, and clock details in the datasheet.
What type of memory does Z86E0812PEC use?
Z86E0812PEC uses 2 KB of one-time-programmable memory arranged as 2K x 8 bits. The manufacturer datasheet describes the device as an OTP microcontroller. A programmed OTP device cannot ordinarily be rewritten for a firmware change, so programming is normally performed during manufacturing. This makes the part appropriate for stable production firmware in security, HVAC, automotive accessory, and consumer-control products.
What package and pin count does Z86E0812PEC use?
Z86E0812PEC is packaged as an 18-pin PDIP device with through-hole leads. The verified product listing identifies the package as 18-pin PDIP, while the related Mouser listing describes the device as an 8-bit MCU with 2K OTP memory and 12 MHz operation. Use the manufacturer pin-description table when assigning PCB tracks because the complete numbered signal list is not included in the available product summaries.
Where can I download the Z86E0812PEC datasheet PDF?
The Z86E0812PEC datasheet can be accessed through the manufacturer-document link on this page or through the verified Zilog datasheet listing hosted by AllDataSheet. The document is titled for Z86E0812PEC and describes the Z8 CMOS OTP microcontroller family. Confirm the package suffix and ordering information against the document before approving a device for a new PCB, especially when comparing it with Z86E0812PEG.
Can Z86E0812PEC be used for HVAC control applications?
Yes, Z86E0812PEC is suitable for cost-sensitive HVAC control applications that fit an 8-bit MCU and 2 KB OTP memory budget. The 12 MHz clock provides useful timing capability for sensor reads, state-machine execution, display updates, and actuator sequencing. Firmware must fit within the one-time-programmable memory budget, and all timing, I/O, and safety-related requirements should be verified against the manufacturer datasheet.
Is Z86E0812PEC suitable for security-system controllers?
Z86E0812PEC can suit security-system controllers when the required firmware fits within 2 KB of OTP memory. Zilog identifies consumer and security products as target markets for the Z8 MCU family, and the 8-bit architecture is appropriate for compact products that coordinate inputs, indicators, locks, alarms, and communication interfaces. Because OTP prevents field rewriting, production planning must include firmware locking and version control.
Z86E0812PEC vs Z86E0812PEG — which one is the better replacement candidate?
Z86E0812PEG is the closer verified drop-in candidate because a comparison identifies matching 12 MHz performance, 2 KB memory, 18-DIP construction, and consistent terminals. The main point to confirm is the exact suffix and qualification requirements before production use. Z86E0812PEC remains the reference selection when its documented grade and programming configuration are required, while Z86E0812PEG should be approved only after datasheet-level pin and parameter review.
When should I choose Z86E0812PEC over Z86E0812PEG?
Choose Z86E0812PEC when the BOM specifies that exact manufacturer part number or when its documented industrial-grade identification is required. Z86E0812PEG can be considered when the supplier confirms the same 18-DIP footprint, 12 MHz clock, 2 KB OTP configuration, and acceptable qualification level. Package fit alone is not sufficient; verify enable, reset, programming, I/O, and supply requirements in each manufacturer datasheet.
What is the best drop-in replacement for Z86E0812PEC?
Z86E0812PEG is the best-supported drop-in replacement candidate identified for Z86E0812PEC because the verified comparison describes matching main performance parameters, 18-DIP packaging, and consistent terminals. A smaller number of pin-compatible alternatives were established, so the replacement should not be treated as automatically interchangeable. Confirm the suffix, temperature grade, programming procedure, and complete datasheet limits before releasing a new production build.
Can Z86E0812PEG replace Z86E0812PEC without PCB changes?
Z86E0812PEG can potentially replace Z86E0812PEC without PCB changes because the verified comparison identifies an 18-DIP package with consistent terminals and matching principal performance characteristics. However, a production substitution still requires confirmation of every pin function, supply voltage, clock configuration, programming interface, and qualification requirement. Complete the component-level review rather than relying on package fit alone.
Where can I buy Z86E0812PEC online?
Use the Request a Quote form on this page to ask for Z86E0812PEC availability, current lead time, and order handling without relying on a static listing. The form is the appropriate route for exact-MPN sourcing because package suffix, programming status, and delivery quantity can affect fulfillment. A distributor listing also describes the component as 2 KB OTP, 12 MHz, and an 18-pin PDIP device.
What is the price of Z86E0812PEC?
The current Z86E0812PEC price is obtained through the Request a Quote form on this page. Pricing can depend on order quantity, programmed-memory status, package suffix, and supply conditions, so a quote is more reliable than a static figure. Submit the exact MPN and required shipment quantity so the supplier can confirm the appropriate commercial terms.
What is the lead time for Z86E0812PEC?
Request the current Z86E0812PEC lead time through the Request a Quote form on this page. Lead time can vary with the exact suffix, programming requirement, order quantity, and available inventory. Include the package suffix, programmed or unprogrammed requirement, target quantity, and delivery location with the request so the commercial response reflects the actual production need.
Is Z86E0812PEC in stock?
Stock availability for Z86E0812PEC should be confirmed through the Request a Quote form on this page because inventory can change quickly and programming status may create separate fulfillment constraints. A product listing states that the device ships today, but current availability for a specific quantity should still be tied to a quotation. Provide the exact MPN and required quantity with the request.
What design considerations apply when programming Z86E0812PEC?
The principal programming consideration is that Z86E0812PEC contains one-time-programmable memory, making the final firmware part of the manufacturing definition. Lock the approved image through a controlled programming workflow, maintain revision traceability, and test programmed devices before they enter assembly. Also verify clock, reset, and unused-pin requirements in the manufacturer datasheet, since OTP cannot correct a later program-memory error.

Datos de referencia de ingeniería para Z86E0812PEC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose Z86E0812PEC when the product specification names that exact MPN, the documented industrial-grade identification is required, or the design team wants to avoid approving a suffix change. Its 8-bit Z8 CPU, 12 MHz clock, 2 KB OTP memory, and 18-pin PDIP package fit compact embedded-control products with stable firmware. Consider Z86E0812PEG when supply continuity or cost is important and the exact suffix has passed a complete engineering review. The verified comparison describes matching 12 MHz performance, 2 KB memory, 18-DIP construction, and consistent terminals, but production approval must still confirm electrical limits, I/O functions, clock and reset behavior, temperature grade, programming flow, and qualification requirements. Do not select either part solely from the package outline, and do not assign a new design to either candidate until the complete manufacturer datasheet has been reviewed.

Comparación con alternativas

Parámetro Este producto Z86E0812PEG
Brand Zilog Zilog
Package 18-pin PDIP 18-DIP
CPU Architecture 8-bit Z8 8-bit Z8
Maximum Clock Frequency 12 MHz 12 MHz
Program Memory 2 KB OTP (2K x 8) 2 KB OTP
Program Memory Type One-time-programmable One-time-programmable
Technology CMOS CMOS
Terminal Compatibility 18-pin PDIP reference configuration Consistent terminals according to the verified comparison
Programming Requirement OTP programming during manufacturing OTP programming during manufacturing

Diferenciadores clave

  • Verified same-package replacement path (frente a Z86E0812PEG)
  • Matching principal operating parameters (frente a Z86E0812PEG)
  • Exact target MPN for controlled BOMs (frente a Z86E0812PEG)

Notas de diseño

Treat OTP programming as a production-controlled step. Freeze the application firmware, archive the exact programming image, and record the device revision before programming because a later logic change cannot normally be written back into the 2 KB OTP array. Use a traceable programming station and verify functional behavior after programming to reduce the risk of an entire manufactured batch carrying an obsolete image.

Confirm every numbered terminal in the manufacturer pin-description table before committing the 18-pin PDIP footprint. The available product summaries establish the package and pin count but do not reproduce the complete pin map. Check supply, ground, clock, reset, programming, and I/O assignments directly, then preserve the recommended clearance around all leads when adapting the board into a through-hole assembly.

Use the manufacturer datasheet for the exact operating voltage, input thresholds, reset behavior, and I/O current limits. A 12 MHz clock specification and 2 KB memory capacity do not determine the external power requirements. Check the maximum load on each output, provide suitable decoupling following the datasheet layout guidance, and account for startup current when selecting the supply and bulk capacitance.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No specific environmental, automotive-qualification, lead-free, halogen-free, or conflict-minerals declarations are present in the verified product summaries. Confirm these statuses from the manufacturer product documentation before environmental or automotive release.

Búsquedas relacionadas

Z86E0812PEC datasheet Z86E0812PEC specifications Z86E0812PEC pinout Z86E0812PEC datasheet pdf Zilog Z86E0812PEC Z86E0812PEC equivalent Z86E0812PEC replacement Z86E0812PEC vs Z86E0812PEG Z86E0812PEC 18 pin PDIP Z86E0812PEC 12 MHz microcontroller Z86E0812PEC price Z86E0812PEC stock

Componentes & términos relacionados

Zilog Z86E0812PEC Z86E0812PEG Z8 8-bit microcontroller MCU embedded microcontroller CMOS microcontroller one-time-programmable memory OTP 2 KB program memory 2K x 8 memory organization 12 MHz clock 18-pin PDIP through-hole package industrial temperature grade HVAC control security-system controller consumer appliance control automotive accessory module access-control controller embedded control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ