Z86E0812PEC - 8-Bit 12MHz OTP Microcontroller | Zilog
MPN: Z86E0812PEC ✓ AktifZ86E0812PEC Ringkasan
An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and embedded control peripherals. The Z8 product family targets cost-sensitive, high-volume applications in consumer equipment, automotive products, security equipment, and HVAC systems. In this hierarchy, the Z86E0812PEC is an MCU, embedded microcontroller, Z8-family processor, and CMOS semiconductor optimized for small control products rather than general-purpose computing.
The principal device parameters are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, an 8-bit CPU, and an 18-pin PDIP package. One-time-programmable memory allows the application program to be fixed during manufacturing, which simplifies production for products whose firmware and configuration do not require field updates. The same 12 MHz and 2K x 8 memory configuration shown for the Z86E0812PEC appears in listings for the related Z86E0812PEG device, making that part a relevant footprint-level comparison.
The Z8 CPU architecture provides a compact implementation for embedded control tasks. The device can be evaluated as a general-purpose controller for products needing digital status inputs, actuator outputs, timing functions, and product-specific sequencing. Because the program memory is one-time programmable, firmware becomes part of the product definition at manufacturing, and later changes normally require a new programmed device rather than an in-circuit memory update.
Typical uses include security-system controllers, HVAC control boards, consumer appliances, automotive accessories, and other embedded products with modest logic requirements. The 12 MHz operating rate provides a practical balance between control responsiveness and system simplicity, while the 2 KB OTP capacity favors compact firmware focused on the product's primary state machine and peripheral routines. Package size and through-hole construction may also suit assembled control modules where leaded components are preferred.
Designers should confirm the complete pin assignment, peripheral configuration, clock requirements, reset behavior, and electrical limits in the manufacturer datasheet before layout. Because the device uses OTP memory, production programming and revision control should be coordinated with firmware approval. Confirming the exact package suffix is also important: the available comparison identifies Z86E0812PEG as an 18-DIP replacement candidate with matching main performance characteristics and consistent terminals.
This page combines the verified Z86E0812PEC identity and listing data with a focused drop-in comparison, package information, technical FAQs, and practical selection guidance. It helps engineers distinguish the target device from a close same-family alternative while highlighting the attributes that must still be checked before approving a replacement in production hardware.
Pilihan pengganti yang segera untuk Z86E0812PEC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera Z86E0812PEC (sama faktor bentuk dan kaki) — berbeza dalam Program Memory Type.
Z86E0812PEG
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →Z86E0812PEC Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit CMOS OTP microcontroller |
| Processor Family | Z8 |
| CPU Architecture | 8-bit |
| Frekuensi Klock Maksimum | 12 MHz |
| Program Memory Type | One-time-programmable (OTP) |
| Program Memory Capacity | 2 KB (2K x 8 bits) |
| Package Type | 18-pin PDIP |
| Kiraan Pin | 18 pins |
| Gaya Pemasangan | Through-hole |
| Temperature Grade | Industrial (XTEMP designation) |
| Technology | CMOS |
| Lebar Bus Data | 8 bits |
| Program Memory Write Capability | One time after programming |
Panduan Konfigurasi Pin Z86E0812PEC 18-pin pdip
Konfigurasi pin untuk Z86E0812PEC (18-pin pdip pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk Z86E0812PEC.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
Z86E0812PEC patut untuk 6 aplikasis: HVAC Control Modules, Security-System Controllers, Consumer Appliance Control, Automotive Accessory Modules, Lighting and Relay Sequencers, Embedded Keypads and Access Controls.
HVAC Control Modules
Z86E0812PEC fits compact HVAC control modules where an 8-bit controller must coordinate sensor inputs, operating modes, indicators, and actuator outputs. Its 12 MHz clock supports responsive state-machine execution without requiring a higher-cost processor, while 2 KB of OTP memory is appropriate for a tightly scoped control program. The 18-pin PDIP format also suits assemblies that use through-hole insertion. Designers should allocate program memory carefully because OTP cannot be rewritten after programming, and they should verify the pin assignments, timer resources, and operating limits in the manufacturer datasheet before finalizing the control board.
Disebarkan
Security-System Controllers
Z86E0812PEC is appropriate for compact security products that combine input monitoring, alarm states, indicators, access-control functions, and simple communication tasks. The 8-bit Z8 architecture is well matched to a deterministic control flow, and the 12 MHz operating frequency provides ample margin for timed sequences in modest embedded firmware. Zilog identifies security among the target markets for this MCU family. Because the 2 KB program memory is one-time programmable, security-system manufacturers should freeze firmware revisions before programming and use traceable part labeling and end-of-line functional testing.
Disebarkan
Consumer Appliance Control
Z86E0812PEC can serve as the primary controller in a cost-sensitive appliance where a small state machine handles switches, indicators, timers, and a limited set of actuators. Its 8-bit CPU, 12 MHz clock, and 2 KB of OTP memory provide enough capability for compact products without a large embedded ecosystem. One-time programming simplifies lifecycle control for products with stable firmware, although production changes require new programmed devices. The design should minimize external components where practical and should use the datasheet's clock and reset recommendations to prevent intermittent startup or timing failures.
Disebarkan
Automotive Accessory Modules
Z86E0812PEC is a candidate for simple automotive accessory controllers, particularly modules whose functions can be represented by a compact 8-bit firmware image. Zilog lists automotive among the application markets for its MCU portfolio, while this device provides a 12 MHz Z8 CPU and 2 KB of OTP memory. A production design must still confirm operating-temperature coverage, electrical limits, automotive qualification status, transient protection, and lifecycle expectations for the exact suffix. Automotive programs should add the appropriate protection and validation beyond the basic control functions supported by the MCU.
Disebarkan
Lighting and Relay Sequencers
Z86E0812PEC can control a lighting panel, relay sequence, or timed actuator subsystem when the design requires deterministic switching rather than a high-level operating system. The 12 MHz clock and 8-bit architecture suit short state-machine routines, event counting, debouncing, and sequencing functions, while the 2 KB OTP limit encourages a compact code footprint. Through-hole packaging may simplify assembly of larger relay-control products. Engineers should check each I/O's electrical limits, add appropriate driver and flyback protection where required, and confirm startup behavior directly from the manufacturer datasheet.
Disebarkan
Embedded Keypads and Access Controls
Z86E0812PEC can serve small access-control or keypad products that scan inputs, manage lock states, update indicators, and implement short timing sequences. Its 8-bit Z8 CPU is efficient for these compact control tasks, and the 12 MHz operating rate supports responsive scanning without a complex processing chain. The 2 KB OTP memory is adequate only when firmware is disciplined around the core access-control function. Before layout, confirm scan timing, debounce requirements, output drive limits, and reset behavior in the manufacturer datasheet; during production, protect the one-time-programmable image with formal change control.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk Z86E0812PEC — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | Z86E0812PEG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 18-pin PDIP | 18-DIP |
| CPU Architecture | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Frequency | 12 MHz | 12 MHz |
| Program Memory | 2 KB OTP (2K x 8) | 2 KB OTP |
| Program Memory Type | One-time-programmable | One-time-programmable |
| Technology | CMOS | CMOS |
| Terminal Compatibility | 18-pin PDIP reference configuration | Consistent terminals according to the verified comparison |
| Programming Requirement | OTP programming during manufacturing | OTP programming during manufacturing |
Penyeberangsung Jelas
- Verified same-package replacement path (vsZ86E0812PEG)
- Matching principal operating parameters (vsZ86E0812PEG)
- Exact target MPN for controlled BOMs (vsZ86E0812PEG)
Catatan Desain
Treat OTP programming as a production-controlled step. Freeze the application firmware, archive the exact programming image, and record the device revision before programming because a later logic change cannot normally be written back into the 2 KB OTP array. Use a traceable programming station and verify functional behavior after programming to reduce the risk of an entire manufactured batch carrying an obsolete image.
Confirm every numbered terminal in the manufacturer pin-description table before committing the 18-pin PDIP footprint. The available product summaries establish the package and pin count but do not reproduce the complete pin map. Check supply, ground, clock, reset, programming, and I/O assignments directly, then preserve the recommended clearance around all leads when adapting the board into a through-hole assembly.
Use the manufacturer datasheet for the exact operating voltage, input thresholds, reset behavior, and I/O current limits. A 12 MHz clock specification and 2 KB memory capacity do not determine the external power requirements. Check the maximum load on each output, provide suitable decoupling following the datasheet layout guidance, and account for startup current when selecting the supply and bulk capacitance.
Maklumat Kesediaan
No specific environmental, automotive-qualification, lead-free, halogen-free, or conflict-minerals declarations are present in the verified product summaries. Confirm these statuses from the manufacturer product documentation before environmental or automotive release.