Z86E0812PEC - 8-Bit 12MHz OTP Microcontroller | Zilog
部品番号: Z86E0812PEC ✓ 生産中Z86E0812PEC 概要
An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and embedded control peripherals. The Z8 product family targets cost-sensitive, high-volume applications in consumer equipment, automotive products, security equipment, and HVAC systems. In this hierarchy, the Z86E0812PEC is an MCU, embedded microcontroller, Z8-family processor, and CMOS semiconductor optimized for small control products rather than general-purpose computing.
The principal device parameters are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, an 8-bit CPU, and an 18-pin PDIP package. One-time-programmable memory allows the application program to be fixed during manufacturing, which simplifies production for products whose firmware and configuration do not require field updates. The same 12 MHz and 2K x 8 memory configuration shown for the Z86E0812PEC appears in listings for the related Z86E0812PEG device, making that part a relevant footprint-level comparison.
The Z8 CPU architecture provides a compact implementation for embedded control tasks. The device can be evaluated as a general-purpose controller for products needing digital status inputs, actuator outputs, timing functions, and product-specific sequencing. Because the program memory is one-time programmable, firmware becomes part of the product definition at manufacturing, and later changes normally require a new programmed device rather than an in-circuit memory update.
Typical uses include security-system controllers, HVAC control boards, consumer appliances, automotive accessories, and other embedded products with modest logic requirements. The 12 MHz operating rate provides a practical balance between control responsiveness and system simplicity, while the 2 KB OTP capacity favors compact firmware focused on the product's primary state machine and peripheral routines. Package size and through-hole construction may also suit assembled control modules where leaded components are preferred.
Designers should confirm the complete pin assignment, peripheral configuration, clock requirements, reset behavior, and electrical limits in the manufacturer datasheet before layout. Because the device uses OTP memory, production programming and revision control should be coordinated with firmware approval. Confirming the exact package suffix is also important: the available comparison identifies Z86E0812PEG as an 18-DIP replacement candidate with matching main performance characteristics and consistent terminals.
This page combines the verified Z86E0812PEC identity and listing data with a focused drop-in comparison, package information, technical FAQs, and practical selection guidance. It helps engineers distinguish the target device from a close same-family alternative while highlighting the attributes that must still be checked before approving a replacement in production hardware.
ドロップイン代替品: Z86E0812PEC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z86E0812PEC (同一形状・フットプリント) — 相違点: Program Memory Type.
Z86E0812PEG
✅ ドロップイン価格はお問い合わせください
データシートを見る →Z86E0812PEC 最大定格&電気的特性
| Product Type | 8-bit CMOS OTP microcontroller |
| Processor Family | Z8 |
| CPU Architecture | 8-bit |
| 最大クロック周波数 | 12 MHz |
| Program Memory Type | One-time-programmable (OTP) |
| Program Memory Capacity | 2 KB (2K x 8 bits) |
| Package Type | 18-pin PDIP |
| ピン数 | 18 pins |
| 実装スタイル | Through-hole |
| Temperature Grade | Industrial (XTEMP designation) |
| Technology | CMOS |
| データバス幅 | 8 bits |
| Program Memory Write Capability | One time after programming |
Z86E0812PEC 18-pin pdip ピン配置ガイド
Z86E0812PEC (18-pin pdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E0812PEC.
詳細は データシート をご参照ください。
主な用途
Z86E0812PEC の用途: 6 件s: HVAC Control Modules, Security-System Controllers, Consumer Appliance Control, Automotive Accessory Modules, Lighting and Relay Sequencers, Embedded Keypads and Access Controls.
HVAC Control Modules
Z86E0812PEC fits compact HVAC control modules where an 8-bit controller must coordinate sensor inputs, operating modes, indicators, and actuator outputs. Its 12 MHz clock supports responsive state-machine execution without requiring a higher-cost processor, while 2 KB of OTP memory is appropriate for a tightly scoped control program. The 18-pin PDIP format also suits assemblies that use through-hole insertion. Designers should allocate program memory carefully because OTP cannot be rewritten after programming, and they should verify the pin assignments, timer resources, and operating limits in the manufacturer datasheet before finalizing the control board.
おすすめ
Security-System Controllers
Z86E0812PEC is appropriate for compact security products that combine input monitoring, alarm states, indicators, access-control functions, and simple communication tasks. The 8-bit Z8 architecture is well matched to a deterministic control flow, and the 12 MHz operating frequency provides ample margin for timed sequences in modest embedded firmware. Zilog identifies security among the target markets for this MCU family. Because the 2 KB program memory is one-time programmable, security-system manufacturers should freeze firmware revisions before programming and use traceable part labeling and end-of-line functional testing.
おすすめ
Consumer Appliance Control
Z86E0812PEC can serve as the primary controller in a cost-sensitive appliance where a small state machine handles switches, indicators, timers, and a limited set of actuators. Its 8-bit CPU, 12 MHz clock, and 2 KB of OTP memory provide enough capability for compact products without a large embedded ecosystem. One-time programming simplifies lifecycle control for products with stable firmware, although production changes require new programmed devices. The design should minimize external components where practical and should use the datasheet's clock and reset recommendations to prevent intermittent startup or timing failures.
おすすめ
Automotive Accessory Modules
Z86E0812PEC is a candidate for simple automotive accessory controllers, particularly modules whose functions can be represented by a compact 8-bit firmware image. Zilog lists automotive among the application markets for its MCU portfolio, while this device provides a 12 MHz Z8 CPU and 2 KB of OTP memory. A production design must still confirm operating-temperature coverage, electrical limits, automotive qualification status, transient protection, and lifecycle expectations for the exact suffix. Automotive programs should add the appropriate protection and validation beyond the basic control functions supported by the MCU.
おすすめ
Lighting and Relay Sequencers
Z86E0812PEC can control a lighting panel, relay sequence, or timed actuator subsystem when the design requires deterministic switching rather than a high-level operating system. The 12 MHz clock and 8-bit architecture suit short state-machine routines, event counting, debouncing, and sequencing functions, while the 2 KB OTP limit encourages a compact code footprint. Through-hole packaging may simplify assembly of larger relay-control products. Engineers should check each I/O's electrical limits, add appropriate driver and flyback protection where required, and confirm startup behavior directly from the manufacturer datasheet.
おすすめ
Embedded Keypads and Access Controls
Z86E0812PEC can serve small access-control or keypad products that scan inputs, manage lock states, update indicators, and implement short timing sequences. Its 8-bit Z8 CPU is efficient for these compact control tasks, and the 12 MHz operating rate supports responsive scanning without a complex processing chain. The 2 KB OTP memory is adequate only when firmware is disciplined around the core access-control function. Before layout, confirm scan timing, debounce requirements, output drive limits, and reset behavior in the manufacturer datasheet; during production, protect the one-time-programmable image with formal change control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E0812PEC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z86E0812PEG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 18-pin PDIP | 18-DIP |
| CPU Architecture | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Frequency | 12 MHz | 12 MHz |
| Program Memory | 2 KB OTP (2K x 8) | 2 KB OTP |
| Program Memory Type | One-time-programmable | One-time-programmable |
| Technology | CMOS | CMOS |
| Terminal Compatibility | 18-pin PDIP reference configuration | Consistent terminals according to the verified comparison |
| Programming Requirement | OTP programming during manufacturing | OTP programming during manufacturing |
主な差別化要因
- Verified same-package replacement path (vs Z86E0812PEG)
- Matching principal operating parameters (vs Z86E0812PEG)
- Exact target MPN for controlled BOMs (vs Z86E0812PEG)
設計ノート
Treat OTP programming as a production-controlled step. Freeze the application firmware, archive the exact programming image, and record the device revision before programming because a later logic change cannot normally be written back into the 2 KB OTP array. Use a traceable programming station and verify functional behavior after programming to reduce the risk of an entire manufactured batch carrying an obsolete image.
Confirm every numbered terminal in the manufacturer pin-description table before committing the 18-pin PDIP footprint. The available product summaries establish the package and pin count but do not reproduce the complete pin map. Check supply, ground, clock, reset, programming, and I/O assignments directly, then preserve the recommended clearance around all leads when adapting the board into a through-hole assembly.
Use the manufacturer datasheet for the exact operating voltage, input thresholds, reset behavior, and I/O current limits. A 12 MHz clock specification and 2 KB memory capacity do not determine the external power requirements. Check the maximum load on each output, provide suitable decoupling following the datasheet layout guidance, and account for startup current when selecting the supply and bulk capacitance.
コンプライアンス情報
No specific environmental, automotive-qualification, lead-free, halogen-free, or conflict-minerals declarations are present in the verified product summaries. Confirm these statuses from the manufacturer product documentation before environmental or automotive release.