Z86E2116VSC - 8-Bit 16MHz OTP MCU with UART | Zilog
N.º de pieza: Z86E2116VSC ✓ ActivoZ86E2116VSC Descripción general
An 8-bit microcontroller is a microprocessor integrated with memory, I/O, timers, and peripheral functions on one semiconductor die. The Z8 family belongs to the broader embedded-controller hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. One-time-programmable memory is intended for production firmware that does not need revision after programming, allowing the finished controller to provide compact, dedicated control without external program-memory devices.
The principal characteristics of the Z86E2116VSC include a maximum 16 MHz clock, 8 KB of OTP program memory organized as 8K × 8, an 8-bit data bus, and integrated UART communication. Its 44-lead PLCC package provides a surface-mount option for industrial and consumer assemblies. Because the programming technology is OTP rather than flash, firmware changes after manufacture generally require a new programmed device.
The Z86E2116VSC uses Zilog's Z8 architecture, an 8-bit CMOS platform intended for cost-sensitive embedded products. Its relatively high 16 MHz clock supports time-sensitive control loops, while the dedicated UART supports serial communication with sensors, human-interface equipment, data converters, or other embedded controllers. The 8 KB code space is best suited to compact applications in which the firmware can fit within one program-memory block.
Typical uses include appliance and appliance-control panels, simple serial interfaces, instrumentation, industrial modules, and compact consumer products. The UART makes the device appropriate for point-to-point supervisory communication, while the integrated OTP program memory is useful for dedicated firmware where field updates are unnecessary. System designers should also consider oscillator startup behavior, I/O drive requirements, and programming provisions before finalizing a PCB.
A critical design consideration is the distinction between a drop-in replacement and a merely similar MCU. Pin compatibility, clocking, memory capacity, peripheral availability, interrupt behavior, and package dimensions must all be checked before substituting another device. The manufacturer datasheet pin table and device programming information should be used as the authority for PCB and firmware decisions.
This product page consolidates the confirmed Z86E2116VSC specifications, package information, UART and OTP details, sourcing information, comparison dimensions, and practical design guidance into one engineering-oriented reference. It is intended to help designers determine whether this Z8 MCU fits the required memory, timing, package, and communication architecture before requesting a quotation.
Alternativas directas para Z86E2116VSC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con Z86E2116VSC (mismo factor de forma y huella) — difiere en RoHS Status, Terminal Form.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasZ86E2116VSC Valores máximos y características eléctricas
| Product Type | 8-bit CMOS microcontroller |
| Processor Core | Z8 |
| Frecuencia de reloj máxima | 16 MHz |
| Ancho del bus de datos | 8 bit |
| Program Memory Type | OTP |
| Program Memory Size | 8 KB (8K × 8) |
| Serial Communication | UART |
| Package Type | 44-lead PLCC |
| Number of Terminals | 44 |
| Terminal Form | J-bend |
| Package Shape | Square |
| Temperature Grade | Commercial |
| Tipo de montaje | Surface mount |
| Estado RoHS | Non_compliant |
| Programming Method | One-time programmable |
| Manufacturer | Zilog |
Guía de configuración de pines de Z86E2116VSC square
Configuración de pines para Z86E2116VSC (encapsulado square). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para Z86E2116VSC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
Z86E2116VSC es adecuado para 6 aplicacións: Appliance Control Module, Serial Sensor Interface, Industrial Communication Module, Simple HMI Controller, Consumer Device Controller, Compact Instrumentation Controller.
Appliance Control Module
The Z86E2116VSC fits compact appliance-control boards that use a dedicated 8-bit program image, a 16 MHz operating rate, and a serial supervisory link. Its 8 KB OTP program memory can hold the final control logic while eliminating a separate program-memory device. The integrated UART allows the controller to report operating states or receive configuration commands from a main board. Because OTP memory cannot be rewritten after programming, the production firmware must be thoroughly validated before programming. Engineers should confirm I/O allocation, clock components, and supply limits in the manufacturer datasheet.
Recomendado
Serial Sensor Interface
The Z86E2116VSC can act as the supervisory controller for a simple serial sensor module because it combines a 16 MHz Z8 core with an integrated UART and 8 KB of OTP firmware memory. The controller can acquire sensor data, apply control logic, and forward status information over the same serial interface. This is most appropriate for a fixed sensor set and stable firmware rather than a platform requiring field updates. Confirm the UART voltage levels, baud-rate assumptions, and available I/O pins before selecting external interface components.
Recomendado
Industrial Communication Module
The Z86E2116VSC is suitable for a compact industrial communication endpoint that uses a single UART and has a predictable, relatively small firmware image. Its 16 MHz maximum clock provides timing margin for protocol handling, and the 8 KB OTP memory supports a dedicated production configuration. The 44-lead PLCC package can simplify rework and visual inspection in controlled assemblies. However, a device requiring frequent firmware revisions, extensive logging, or multiple high-speed communication interfaces may be better served by a flash-based MCU with more memory and peripherals.
Recomendado
Simple HMI Controller
The Z86E2116VSC can manage a simple human-interface module when the interface requires limited button scanning, display-state handling, and a serial connection to a display or keypad. The 16 MHz Z8 processor provides sufficient clock rate for many sequential I/O tasks, while 8 KB of OTP memory is suitable for a fixed menu and state machine. The integrated UART can simplify communication with a host controller or peripheral display. Final design work should map all required I/O lines and verify timing against the device pin description before layout release.
Recomendado
Consumer Device Controller
The Z86E2116VSC supports a compact consumer device in which the control firmware is finalized before production and the primary requirement is economical local control rather than user-configurable software. Its 8 KB OTP memory can store a fixed operating program, the 16 MHz clock supports responsive task execution, and the UART provides a path for external configuration or accessory communication. If consumers must update firmware, change product behavior, or add memory-intensive features, choose a flash-based controller instead. Validate startup behavior and programming yield as part of the production plan.
Recomendado
Compact Instrumentation Controller
The Z86E2116VSC can serve as a local controller in compact instrumentation when it must sequence measurements, process a bounded set of commands, and report results through a serial port. The 16 MHz Z8 operating rate supports time-sensitive control tasks, while the 8 KB OTP program space can hold a dedicated measurement and communication state machine. Its 44-lead PLCC package provides a practical option for boards assembled in moderate volumes. Instrument designs should separately verify analog-interface requirements, reference accuracy, and calibration storage because those specifications are outside the confirmed MCU feature set.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para Z86E2116VSC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Zilog |
| Package | 44-lead PLCC |
| Processor Core | Z8 |
| Data Bus Width | 8 bit |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 8 KB OTP (8K × 8) |
| Serial Interface | UART |
| Terminal Count | 44 |
| Mounting Type | Surface mount |
Diferenciadores clave
- Compact dedicated-control architecture (frente a ATMEGA8L-8MUR)
- Dedicated Z8 processor family (frente a ATXMEGA64D4-AUR)
- PLCC package for inspectable assemblies (frente a STM8S103F3M6TR)
Notas de diseño
Do not treat a similar Z8 microcontroller as a drop-in replacement solely because it has a 16 MHz clock and 8 KB of memory. A valid substitution must preserve the 44-lead PLCC footprint, device-specific pin assignments, clock topology, UART functions, reset behavior, interrupt structure, and OTP programming requirements. Also verify whether a candidate suffix changes temperature grade, package form, or programming configuration.
Before routing the PCB, assign the oscillator, reset, programming, UART, and required I/O functions using the manufacturer pin-description table. Provide short oscillator traces, a stable ground reference, and clean programming access. The PLCC land pattern and solder process must also be checked because lead pitch, pad length, and thermal or solderability requirements are determined by the package drawing rather than by the generic PLCC family name.
Design the power tree around the device's confirmed electrical operating limits in the manufacturer datasheet. Decoupling should be placed directly at the supply and ground pins, while UART and programming signals should be protected against excessive voltage and ESD. Do not infer the permitted supply range from the 16 MHz clock specification; verify absolute maximum and recommended operating conditions before selecting regulators or level-shifting components.
OTP memory creates a production constraint that flash-based MCUs do not have: firmware changes generally require a newly programmed device. Freeze the application code after functional verification, archive the exact programmed image, and establish programming yield and traceability controls. If field updates, diagnostic revisions, or late customization are required, move the design to a flash-memory MCU instead of planning around field reprogramming.
Información de cumplimiento
The product listing identifies the Z86E2116VSC as RoHS non-compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements were established.