Z86E2116VSC - 8-Bit 16MHz OTP MCU with UART | Zilog
MPN: Z86E2116VSC ✓ Hoạt độngZ86E2116VSC Tóm tắt
An 8-bit microcontroller is a microprocessor integrated with memory, I/O, timers, and peripheral functions on one semiconductor die. The Z8 family belongs to the broader embedded-controller hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. One-time-programmable memory is intended for production firmware that does not need revision after programming, allowing the finished controller to provide compact, dedicated control without external program-memory devices.
The principal characteristics of the Z86E2116VSC include a maximum 16 MHz clock, 8 KB of OTP program memory organized as 8K × 8, an 8-bit data bus, and integrated UART communication. Its 44-lead PLCC package provides a surface-mount option for industrial and consumer assemblies. Because the programming technology is OTP rather than flash, firmware changes after manufacture generally require a new programmed device.
The Z86E2116VSC uses Zilog's Z8 architecture, an 8-bit CMOS platform intended for cost-sensitive embedded products. Its relatively high 16 MHz clock supports time-sensitive control loops, while the dedicated UART supports serial communication with sensors, human-interface equipment, data converters, or other embedded controllers. The 8 KB code space is best suited to compact applications in which the firmware can fit within one program-memory block.
Typical uses include appliance and appliance-control panels, simple serial interfaces, instrumentation, industrial modules, and compact consumer products. The UART makes the device appropriate for point-to-point supervisory communication, while the integrated OTP program memory is useful for dedicated firmware where field updates are unnecessary. System designers should also consider oscillator startup behavior, I/O drive requirements, and programming provisions before finalizing a PCB.
A critical design consideration is the distinction between a drop-in replacement and a merely similar MCU. Pin compatibility, clocking, memory capacity, peripheral availability, interrupt behavior, and package dimensions must all be checked before substituting another device. The manufacturer datasheet pin table and device programming information should be used as the authority for PCB and firmware decisions.
This product page consolidates the confirmed Z86E2116VSC specifications, package information, UART and OTP details, sourcing information, comparison dimensions, and practical design guidance into one engineering-oriented reference. It is intended to help designers determine whether this Z8 MCU fits the required memory, timing, package, and communication architecture before requesting a quotation.
Bộ thay thế dễ dàng lắp đặt cho Z86E2116VSC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với Z86E2116VSC (cùng hình factor và footprint) — khác nhau ở RoHS Status, Terminal Form.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếZ86E2116VSC Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit CMOS microcontroller |
| Processor Core | Z8 |
| Tần số xung maksimum | 16 MHz |
| Bề rộng đường dữ liệu | 8 bit |
| Program Memory Type | OTP |
| Program Memory Size | 8 KB (8K × 8) |
| Serial Communication | UART |
| Package Type | 44-lead PLCC |
| Number of Terminals | 44 |
| Terminal Form | J-bend |
| Package Shape | Square |
| Temperature Grade | Commercial |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | Non_compliant |
| Programming Method | One-time programmable |
| Manufacturer | Zilog |
Hướng dẫn cấu hình chân Z86E2116VSC square
Cấu hình chân cho Z86E2116VSC (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho Z86E2116VSC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
Z86E2116VSC phù hợp cho 6 Áp dụngs: Appliance Control Module, Serial Sensor Interface, Industrial Communication Module, Simple HMI Controller, Consumer Device Controller, Compact Instrumentation Controller.
Appliance Control Module
The Z86E2116VSC fits compact appliance-control boards that use a dedicated 8-bit program image, a 16 MHz operating rate, and a serial supervisory link. Its 8 KB OTP program memory can hold the final control logic while eliminating a separate program-memory device. The integrated UART allows the controller to report operating states or receive configuration commands from a main board. Because OTP memory cannot be rewritten after programming, the production firmware must be thoroughly validated before programming. Engineers should confirm I/O allocation, clock components, and supply limits in the manufacturer datasheet.
Được đề xuất
Serial Sensor Interface
The Z86E2116VSC can act as the supervisory controller for a simple serial sensor module because it combines a 16 MHz Z8 core with an integrated UART and 8 KB of OTP firmware memory. The controller can acquire sensor data, apply control logic, and forward status information over the same serial interface. This is most appropriate for a fixed sensor set and stable firmware rather than a platform requiring field updates. Confirm the UART voltage levels, baud-rate assumptions, and available I/O pins before selecting external interface components.
Được đề xuất
Industrial Communication Module
The Z86E2116VSC is suitable for a compact industrial communication endpoint that uses a single UART and has a predictable, relatively small firmware image. Its 16 MHz maximum clock provides timing margin for protocol handling, and the 8 KB OTP memory supports a dedicated production configuration. The 44-lead PLCC package can simplify rework and visual inspection in controlled assemblies. However, a device requiring frequent firmware revisions, extensive logging, or multiple high-speed communication interfaces may be better served by a flash-based MCU with more memory and peripherals.
Được đề xuất
Simple HMI Controller
The Z86E2116VSC can manage a simple human-interface module when the interface requires limited button scanning, display-state handling, and a serial connection to a display or keypad. The 16 MHz Z8 processor provides sufficient clock rate for many sequential I/O tasks, while 8 KB of OTP memory is suitable for a fixed menu and state machine. The integrated UART can simplify communication with a host controller or peripheral display. Final design work should map all required I/O lines and verify timing against the device pin description before layout release.
Được đề xuất
Consumer Device Controller
The Z86E2116VSC supports a compact consumer device in which the control firmware is finalized before production and the primary requirement is economical local control rather than user-configurable software. Its 8 KB OTP memory can store a fixed operating program, the 16 MHz clock supports responsive task execution, and the UART provides a path for external configuration or accessory communication. If consumers must update firmware, change product behavior, or add memory-intensive features, choose a flash-based controller instead. Validate startup behavior and programming yield as part of the production plan.
Được đề xuất
Compact Instrumentation Controller
The Z86E2116VSC can serve as a local controller in compact instrumentation when it must sequence measurements, process a bounded set of commands, and report results through a serial port. The 16 MHz Z8 operating rate supports time-sensitive control tasks, while the 8 KB OTP program space can hold a dedicated measurement and communication state machine. Its 44-lead PLCC package provides a practical option for boards assembled in moderate volumes. Instrument designs should separately verify analog-interface requirements, reference accuracy, and calibration storage because those specifications are outside the confirmed MCU feature set.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho Z86E2116VSC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Zilog |
| Package | 44-lead PLCC |
| Processor Core | Z8 |
| Data Bus Width | 8 bit |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 8 KB OTP (8K × 8) |
| Serial Interface | UART |
| Terminal Count | 44 |
| Mounting Type | Surface mount |
Bảo phân biệt quan trọng
- Compact dedicated-control architecture (vsATMEGA8L-8MUR)
- Dedicated Z8 processor family (vsATXMEGA64D4-AUR)
- PLCC package for inspectable assemblies (vsSTM8S103F3M6TR)
Ghi chú thiết kế
Do not treat a similar Z8 microcontroller as a drop-in replacement solely because it has a 16 MHz clock and 8 KB of memory. A valid substitution must preserve the 44-lead PLCC footprint, device-specific pin assignments, clock topology, UART functions, reset behavior, interrupt structure, and OTP programming requirements. Also verify whether a candidate suffix changes temperature grade, package form, or programming configuration.
Before routing the PCB, assign the oscillator, reset, programming, UART, and required I/O functions using the manufacturer pin-description table. Provide short oscillator traces, a stable ground reference, and clean programming access. The PLCC land pattern and solder process must also be checked because lead pitch, pad length, and thermal or solderability requirements are determined by the package drawing rather than by the generic PLCC family name.
Design the power tree around the device's confirmed electrical operating limits in the manufacturer datasheet. Decoupling should be placed directly at the supply and ground pins, while UART and programming signals should be protected against excessive voltage and ESD. Do not infer the permitted supply range from the 16 MHz clock specification; verify absolute maximum and recommended operating conditions before selecting regulators or level-shifting components.
OTP memory creates a production constraint that flash-based MCUs do not have: firmware changes generally require a newly programmed device. Freeze the application code after functional verification, archive the exact programmed image, and establish programming yield and traceability controls. If field updates, diagnostic revisions, or late customization are required, move the design to a flash-memory MCU instead of planning around field reprogramming.
Thông tin tuân thủ
The product listing identifies the Z86E2116VSC as RoHS non-compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements were established.